29.140.99 有关灯的其他标准 标准查询与下载

NF C72-776*NF EN 62776:2015 设计为改进线性荧光灯的双端LED灯. 安全规格

Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications

EN 62756-1:2015 数字负载侧传输照明控制（DLT） 第1部分：基本要求

IEC 62756-1:2015(E) specifies a protocol, electrical interface and test procedures for control of electronic lighting equipment by digital signals over the load side mains wiring. Safety requirements are not covered by this standard.

Digital load side transmission lighting control (DLT) - Part 1: Basic requirements

IEC 61048:2006+AMD1:2015 CSV 灯具附件 管状荧光灯用电容器 和其他放电灯电路 一般和安全要求

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements

IEC 61048:2006/AMD1:2015 修改件1.灯具附件.管状荧光灯和其他放电灯电路用电容器.一般要求和安全要求

Amendment 1 - Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements

DB44/T 1634-2015 地下停车场用LED灯具技术规范

本规范规定了地下停车场所照明用LED灯的分类、要求，以及试验方法。 本规范适用于地下停车场各场所照明用LED灯在180～264Vac电压和47-63Hz频率范围。

Technical specifications for LED lamps used in underground parking lots

DB44/T 1626-2015 LED照明产品环境声明 EPD报告格式要求

本标准规定了LED照明产品Ⅲ型环境声明（EPD）报告格式要求。本标准适用于LED照明产品EPD报告的编制与审核。

LED lighting product environmental declaration EPD report format requirements

DB44/T 1624-2015 LED照明产品环境声明 Ⅲ型环境声明

本标准规定了LED照明产品Ⅲ型环境声明计划建立与运行流程、Ⅲ型环境声明计划的建立、PCR文件的制定评审及Ⅲ型环境声明的编制与独立验证。 本标准适用于LED照明产品Ⅲ型环境声明的建立、运行和管理。

Environmental declaration for LED lighting products Type III environmental declaration

DB44/T 1627-2015 LED照明产品能效要求

本标准规定了LED照明终端产品（以下简称LED照明产品）的能效要求和测量方法。 本标准适用于总光通量大于等于150lm，面向终端应用的、功能结构完整的、对公共电网电源即插即用的、包含LED核心光源的整体照明器具。

Energy Efficiency Requirements for LED Lighting Products

DB44/T 1638-2015 自镇流LED玉米灯

本标准规定了自镇流LED玉米灯的术语和定义、分类与命名、技术要求、试验方法、检验规则及标志、包装、运输和贮存等要求。 本标准适用范围： — 额定功率60W以下； — 额定电压大于50V且小于或等于250V；

Self-ballasted LED Corn Light

DB44/T 1637-2015 LED照明模块热特性测量方法

本标准规定了LED照明模块的外部温度、结温等热特性的测试方法。 本标准适用于在采用直流250V以下或交流50Hz或者60Hz、1000V以下电源供电，恒定电压、恒定电流或恒定功率下稳定工作的LED模块。

Measurement method of thermal characteristics of LED lighting module

DB44/T 1625-2015 LED照明产品环境声明 PCR文件格式要求

本标准规定了用于LED照明产品Ⅲ型环境声明的产品种类规则（PCR）文件格式要求。本标准适用于LED照明产品PCR文件的编制与审核。

LED lighting product environmental declaration PCR file format requirements

IECQ OD 3801-2015 IEC电子元器件质量评定体系 (IECQ体系). 与发光二极管 (LED) 照明相关的元器件产品的IECQ LED元器件产品合规性证书的签发规程

IEC Quality Assessment System for Electronic Components (IECQ System) - Procedures for the issuing of IECQ LED Component Product Certificates of Conformity for Component Product(s) associated with LED lighting

IECQ OD 3802-2015 IEC电子元器件质量评定体系 (IECQ体系). 寻求与发光二极管 (LED) 照明相关的元器件产品的IECQ LED元器件产品合规性证书的制造商的质量体系要求

General This document specifies particular requirements and guidance on the establishment and maintenance of a quality system to meet the requirements of the IECQ Scheme for LED Lighting. While based on the objectives of ISO 9001, it does not preclude the use of other quality systems that are compatible with the objectives of ISO 9001:2008, subject to the acceptance of the IECQ CB to which an application for IECQ LED Lighting Certification is made. Therefore, when IECQ CBs assess the quality systems of manufacturers, this document shall be the basis of the initial assessment and subsequent surveillance visits. The intention of this document is that quality management system requirements of the IECQ Scheme for LED Lighting are to be congruent with the elements of ISO 9001:2008. Permissible exclusions Permissible exclusions relating to Clause 7 of ISO 9001, as provided in ISO 9001, are not accepted within the IECQ Scheme for LED Lighting.

IEC Quality Assessment System for Electronic Components (IECQ System) - Quality system requirements for manufacturers seeking IECQ LED Component Product Certificates of Conformity for Component Product(s) associated with LED lighting

LST EN 60810-2015 道路车辆用白炽灯. 性能要求(IEC 60810-2014)

Lamps for road vehicles - Performance requirements (IEC 60810:2014)

BS EN 62811:2015 放电灯 (荧光灯除外) 用交流和/或直流供电电子控制设备. 低频方波操作的性能要求

AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps). Performance requirements for low frequency squarewave operation

BS EN 61347-1:2015 灯控装置.一般和安全性要求

Lamp controlgear. General and safety requirements

EN 62733:2015 电子灯控制装置中的可编程组件 一般和安全要求

IEC 62733:2015 provides general and safety requirements for programmable components used in products covered by IEC 61347. The requirements of this standard are only applicable to the programmable components (including its embedded software) in the electronic lamp controlgear. For other electric/electronic circuits and their components in the electronic lamp controlgear, the requirements of IEC 61347 series apply.

Programmable components in electronic lamp controlgear - General and safety requirements

BS EN 62776:2015 设计用于改装线性荧光灯的双帽LED灯 安全规范

Double-capped LED lamps designed to retrofit linear fluorescent lamps. Safety specifications

EN 62811:2015 用于放电灯（不包括荧光灯）的交流和/或直流供电的电子控制装置 低频方波操作的性能要求

IEC 62811:2015 specifies performance requirements for electronic controlgear for use on a.c. and/or d.c. supplies up to 1 000 V and/or a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with discharge lamps, as specified in IEC 61167, which have information for low frequency square wave operation, where the frequency range of the low frequency is from 70 Hz to 400 Hz.

AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency squarewave operation

EN 61347-1:2015 灯的控制装置.第1部分:通用和安全要求

Lamp controlgear - Part 1: General and safety requirements