29.140.99 有关灯的其他标准 标准查询与下载

DIN EN 61347-2-13:2015 灯控装置.第2-13部分:发光二极管交直流供电控制设备的特殊要求(IEC 61347-2-13-2014);德文版本EN 61347-2-13-2014

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (IEC 61347-2-13:2014); German version EN 61347-2-13:2014

IEC 62756-1:2015 数字负荷端传输照明控制 (DLT). 第1部分: 基本要求

Digital load side transmission lighting control (DLT) - Part 1: Basic requirements

BS EN 60810:2015 道路车辆用灯具.性能要求

Lamps for road vehicles. Performance requirements

GSO IEC 61347-2-2:2015 灯控制装置 第2-2部分：用于白炽灯的交流或直流供电电子降压逆变器的特殊要求

IEC 61347-2-2:2011 specifies particular safety requirements for electronic step-down convertors for use on d.c. supplies of up to 250 V or a.c. supplies of up to 1 000 V, at 50 Hz or 60 Hz and with rated output voltage 50 V r.m.s. at a frequency deviating from the supply frequency, or 120 V ripple free d.c. between conductors and between any conductor and earth, associated with tungsten-halogen lamps as specified in IEC 60357 and other filament lamps. This second edition of IEC 61347-2-2 replaces the first edition (2000), Amendment 1 (2005) and Amendment 2 (2006). The major modification for this second edition is the changeover from SELV equivalent to SELV. This publication is to be read in conjunction with IEC 61347-1:2007.

Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps

GSO IEC 61347-2-8:2015 灯控制装置 第2-8部分：荧光灯镇流器的特殊要求

This part of IEC 61347 specifies safety requirements for ballasts, excluding resistance types, for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with fluorescent lamps with or without pre-heated cathodes operated with or without a starter or starting device and having rated wattages, dimensions and characteristics as specified in IEC 60081 and 60901. This consolidated version consists of the first edition (2000) and its amendment 1 (2006). Therefore, no need to order amendment in addition to this publication.

Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps

GSO IEC 61347-2-12:2015 灯控制装置 第2-12部分：放电灯（荧光灯除外）的交流或直流供电电子镇流器的特殊要求

IEC 61347-2-12:2005+A1:2010 specifies particular general and safety requirements for d.c. or a.c. supplied electronic ballasts. The supply comprises a.c. voltages up to 1000 V at 50 Hz/60 Hz. The type of ballast is an convertor that may contain igniting and stabilising elements for operation of a discharge lamp at d.c. or at a frequency that can deviate from the supply frequency. The lamps associated with the ballast are specified in IEC 60188 (High pressure mercury vapour lamps), IEC 60192 (Low pressure sodium vapour lamps), IEC 60662 (High pressure sodium vapour lamps), IEC 61167 (Metal halide lamps) and else for general purpose lighting. Ballasts for fluorescent lamps and for lamps for special applications like for theatre and for vehicles are excluded. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. A vertical line in the margin shows where the base publication has been modified by amendment 1. Additions and deletions are displayed in red, with deletions being struck through. This consolidated version consists of the first edition (2005) and its amendment 1 (2010). Therefore, no need to order amendment in addition to this publication. This publication is to be read in conjunction with IEC 61347-1:2000.

Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)

GSO IEC 61347-2-13:2015 灯控制器 第2-13部分：发光二极管 (LED) 模块的交流或直流供电电子控制器的特殊要求

IEC 61347-2-13:2014 specifies particular safety requirements for electronic controlgear for use on d.c. or a.c. supplies up to 1 000 V (a.c. at 50 Hz or 60 Hz) and at an output frequency which can deviate from the supply frequency, associated with LED modules. Controlgear for LED modules specified in this standard are designed to provide constant voltage or current at SELV or higher voltages. Deviations from the pure voltage and current types do not exclude the gear from this standard. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. a) Replacement of the SELV-equivalent requirements by SELV requirements and reference to the SELV requirements of Annex L in IEC 61347-1:2007/AMD2:2012. b) Reference to IEC 61347-1 for the protection against accidental contact with live parts, moisture resistance and insulation and electric strength. c) New Annex J for emergency lighting requirements. This publication shall be read in conjunction with IEC 61347-1:2012

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

IEC 62811:2015 用于放电灯（不包括荧光灯）的交流和/或直流供电的电子控制装置 低频方波操作的性能要求

AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency square wave operation

LST EN 61347-2-13-2015 灯的控制装置. 第2-13部分: LED模块用直流或者交流供电电子控制设备的详细要求 (IEC 61347-2-13-2014)

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (IEC 61347-2-13:2014)

EN 60810:2015 道路车辆用灯.性能要求

Lamps for road vehicles - Performance requirements

DIN EN 62442-3:2015 灯控制装置的能源性能 第3部分：卤素灯和 LED 模块的控制装置 确定控制装置效率的测量方法（IEC 62442-3:2014）；德文版 EN 62442-3:2014

Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear (IEC 62442-3:2014); German version EN 62442-3:2014

DB35/T 1494-2015 LED道路智能照明控制系统技术规范

本标准规定了LED道路智能照明控制系统(以下简称“控制系统”)的术语和定义、系统架构、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于采用LED灯具的道路智能照明控制系统。

Technical Specifications for LED Road Intelligent Lighting Control System

DIN EN 62442-2:2015 灯具控制装置的能源性能. 第2部分: 高强度放电灯 (荧光灯除外) 的控制装置. 确定控制装置效率的测量方法 (IEC 62442-2-2014); 德文版本EN 62442-2-2014

Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear (IEC 62442-2:2014); German version EN 62442-2:2014

IEC 61347-1:2015 灯控装置.第1部分:一般安全要求

This part of IEC 61347 specifies general and safety requirements for lamp controlgear for use on d.c. supplies up to 250 V and/or a.c. supplies up to 1 000 V at 50 Hz or 60 Hz. This standard also covers lamp controlgear for lamps which are not yet standardized. Tests dealt with in this standard are type tests. Requirements for testing individual lamp controlgear during production are not included. Requirements for semi-luminaires are given in IEC 60598-1:2014 (see definition 1.2.60). Particular requirements for controlgears providing safety extra low voltage (from now on SELV) are given in Annex L. It can be expected that lamp control gear which comply with this standard will not compromise safety between 90 % and 110 % of their rated supply voltage in independent use and when operated in luminaires complying with the safety standard IEC 60598-1 and the relevant part IEC 60598-2-xx and with lamps complying with the relevant lamp standards. Performance requirements may require tighter limits.

Lamp controlgear - Part 1: General and safety requirements

NF C71-247-13*NF EN 61347-2-13:2014 灯控装置.第2-13部分:发光二极管交直流供电控制设施的特殊要求

La présente partie de l'IEC 61347 spécifie les exigences particulières de sécurité pour les appareillages électroniques pour l'utilisation sur des alimentations en courant continu ou en courant alternatif jusqu'à 1 000 V (en courant alternatif à 50 Hz ou 60 Hz) et avec une fréquence de sortie qui peut être différente de la fréquence d'alimentation, en association avec des modules de LED.

Lamp controlgear - Part 2-13 : particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

GSO IEC 62384:2014 LED 型号的直流或交流供电控制组件 性能要求

This international standard specifies performance requirements for electronic control gear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz with an output frequency which can deviate from the supply frequency, associated with LED modules according to IEC 62031. Control gear for LED modules specified in this standard are designed to provide constant voltage or current. Deviations from the pure voltage and current types do not exclude the gear from this standard. NOTE 1 The tests in this standard are type tests. Requirements for testing individual control gear during production are not included. NOTE 2 Requirements for control gear which incorporate means for varying the output power are under consideration. NOTE 3 It may be expected that control gear complying with this standard will ensure satisfactory operation between 92 % and 106 % of the rated supply voltage, taking into account the specifications of the LED module manufacturer

DC or AC supplied electronic control gear for LED modules - Performance requirements

GSO IEC 62707-1:2014 LED 模块 分布 第1部分：一般要求和白栅

This part of IEC 62707 specifies general requirements, a grid and a corresponding code for the colour binning of white LED packages emitting incoherent, visible radiation. It applies for LED packages. Other parts of the IEC 62707 series covering chromaticity of coloured LED packages, luminous flux/luminous intensity, colour rendering and forward voltage are in preparation or under consideration. NOTE 1 This International Standard does not apply for LED modules, LED lamps and LED luminaires. NOTE 2 Even though the words "white light" are used, the purpose of this International Standard is not to define "white light", but to specify a grid and a corresponding colour code for the colour binning of white LED packages emitting incoherent, visible radiation. The area covered by the grid may differ from the definition of white light given in other standards or regulations.

LED-binning - Part 1: General requirements and white colour grid

GSO IEC 62442-1:2014 灯控制设备的能源性能 第1部分：荧光灯控制设备 用于确定控制设备电路的整体内部操作和控制设备的效率的测量方法

This part of IEC 62442 defines a measurement and calculation method of the total input power for controlgear ‒ lamp circuits when operating with their associated fluorescent lamp(s). The calculation method for the efficiency of the lamp controlgear is also defined. This International Standard applies to electrical controlgear lamp circuits consisting only of the controlgear and the lamp(s). It is intended for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz. NOTE Requirements for testing individual controlgear during production are not included. It specifies the measurement method for the total input power and the calculation method of the controlgear efficiency for all controlgear used for domestic and normal commercial purposes operating with the following fluorescent lamps: – linear fluorescent lamps; – single-ended (compact) fluorescent lamps; – other general purpose fluorescent lamps. This International Standard does not apply to: – controlgear which form an integral part of the lamp; – controllable wire-wound magnetic controlgear; – luminaires, which rely on additional optical performance aspects.

Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear

DB44/T 1490-2014 带传感器的LED灯性能要求

本标准规定了以LED为光源、电源电压不超过250V的带有开关控制功能传感器的灯的技术要求。

Performance requirements for LED lamps with sensors

DB44/T 1494-2014 充电式LED台灯

本标准规定了充电式LED台灯的术语和定义、分类与命名、技术要求、试验方法、检验规则、标志、说明书、包装、运输和贮存。

Rechargeable LED Desk Lamp