29.160.01 旋转电机综合 标准查询与下载

GOST IEC 60034-2A-2012 旋转电机. 第2部分. 测定旋转电机(部分车辆电机除外)损耗和效率的试验方法. 采用量热法测量损耗

Rotating electrical machines. Part 2. Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for fraction vehicles). Measurement of losses by the calorimetric method

ANSI/UL 1004-6-2012 伺服和步进电动机安全性标准

A revision to the rating and temperatures tests is proposed.

Standard for Safety for Servo and Stepper Motors

GOST R IEC 60034-7-2012 旋转电机. 第7部分. 结构, 安装配置和接线盒位置的型式分类(代码IM)

Rotating electrical machines. Part 7. Classification of types of construction, mounting arrangements and terminal box position (Code IM)

IEEE 1799-2012 定子线圈、棒材和绕组外部放电的的质量控制试验用IEEE推荐实施规程

IEEE Recommended Practice for Quality Control Testing of External Discharges on Stator Coils, Bars, and Windings

GOST R IEC 60034-6-2012 旋转电机. 第6部分. 冷却方法(IC代码)

Rotating electrical machines. Part 6. Methods of cooling (IC Code)

JB/T 8982-2011 三相交流稳频稳压电源机组及系统技术条件

本标准规定了三相交流稳频稳压电源机组及系统的基本参数、技术要求、试验方法、检验规则以及标志、包装等。 本标准适用于电动机拖动的同步发电机组及其稳频稳压装置的整套系统（以下简称系统）。电源系统作为小型三相交流电机及其他电器试验用的低波动率、宽调节范围的电源设备，也可作为符合本标准技术指标的其他用电器的电源设备，或作为变频电源设备。

Specification for a.c.three-phase stable frequency and voltage power source set and system

IEC 2/1651/CD:2011 IEC/TS 60034-27-3,版本1:旋转电机.第27-3部分:在旋转电机定子绕组绝缘上的电介质损耗因数测量

IEC/TS 60034-27-3, Ed. 1: Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines

DS/EN 60034-16-1:2011 旋转电机 第 16-1 部分：同步电机的励磁系统 定义

This standard defines terms applicable to the excitation systems of synchronous rotating electrical machines.

Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions

DIN CLC/TS 60034-27:2011 旋转电机.第27部分:在旋转电机绝缘子绕组上的局部离线放电测量(IEC/TS 60034-27-2006);德文版本CLC/TS 60034-27-2011

Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines (IEC/TS 60034-27:2006); German version CLC/TS 60034-27:2011

BS DD CLC/TS 60034-27:2011 旋转电机.旋转电机定子绕组绝缘体的脱线局部放电测量

Rotating electrical machines. Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines

DD CLC/TS 60034-24:2011 旋转电机 在线检测和诊断旋转电机活动部件和轴承电流的潜在故障 申请指南

What is DD CLC/TS 60034-24 - Rotating electrical machines about?   DD CLC/TS 60034-24 deals with the detection of failures at the active parts of multi-phase rotating machines (all kinds of winding faults in stator and rotor, cage deficiencies, eccentricities) and of bearing currents.   DD CLC/TS 60034-24 is applicable to the on-line detection and diagnosis of failures at the active parts of multi-phase rotating electrical machines (induction and synchronous machines) and of bearing currents.   Who is DD CLC/TS 60034-24 - Rotating electrical machines for?  

Rotating electrical machines - Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents. Application guide

BS DD CLC/TS 60034-24:2011 旋转电机.在线检测诊断旋转电机和承载电流的有源部件的潜在缺陷.应用指南

This part of IEC 60034 is applicable to the on-line detection and diagnosis of failures at the active parts of multi-phase rotating electrical machines (induction and synchronous machines) and of bearing currents. The failure analysis includes: – interturn faults; – phase-to-phase short-circuits; – double earth faults and single earth faults of motors with earth connection of the star-point; – static and dynamic eccentricities; – cage imperfection or defects (e.g. broken bars or end-rings); – bearing currents. This can be achieved by tools like search coils or other magnetic sensors or partly by the analysis of the terminal voltages and currents. The detection of the following effects is excluded from the scope: – vibration (covered by ISO standards, e.g. ISO 10816 and ISO 7919); – partial discharge (covered by IEC 60034-27); – single earth-faults of motors without earth connection of the star-point; – core imperfection. Also excluded are special methods applicable for specific applications only (e.g. turbo generators).

Rotating electrical machines. Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents. Application guide

DIN CLC/TS 60034-24:2011 旋转电机.第24部分:在线探测和诊断旋转电机和轴承电流的有源部件的潜在缺陷.应用指南(IEC/TS 60034-24-2009).德文版本CLC/TS 60034-24-2011

Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide (IEC/TS 60034-24:2009); German version CLC/TS 60034-24:2011

DS/CLC/TS 60034-18-33:2011 旋转电机 第 18-33 部分：绝缘系统的功能评估 成型绕组的测试程序 在同时热应力和电应力下的耐久性多因素评估

Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses

DS/CLC/TS 60034-27:2011 旋转电机 第27部分：旋转电机定子绕组绝缘的离线局部放电测量

Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines

DS/CLC/TS 60034-18-42:2011 旋转电机 第 18-42 部分：由电压转换器供电的旋转电机中使用的抗局部放电电气绝缘系统（II 型）的鉴定和验收测试

Rotating electrical machines - Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters

DS/CLC/TS 60034-24:2011 旋转电机 第24部分：旋转电机有源部件和轴承电流潜在故障的在线检测和诊断 应用指南

Se engelsk abstract.

Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide

NF C51-111*NF EN 60034-1:2011 旋转电机.第1部分:额定值和性能.

Rotating electrical machines - Part 1 : rating and performance.

DS/EN 60034-18-32:2011 旋转电机 第 18-32 部分：绝缘系统的功能评估 成型绕组的测试程序 电气耐久性评估

This publication has the status of a technical report - type 2.

Rotating electrical machines – Part 18-32: Functional evaluation of insulation systems – Test procedures for form-wound windings – Evaluation by electrical endurance

DIN EN 60034-1:2011 旋转电机.第1部分:额定功率和性能(IEC 60034-1-2010,修订版);德文版本EN EN 60034-1-2010 + Cor.:2010

Rotating electrical machines - Part 1: Rating and performance (IEC 60034-1:2010, modified); German version EN 60034-1:2010 + Cor.:2010