29.160.01 旋转电机综合 标准查询与下载

JIS C 4034-2-1:2011 旋转电机.第2-1部分:试验(不包括牵引车辆用电机)中损失和能效的测定用方法

Rotating electrical machines -- Part 2-1: Methods for determining losses and efficiency from tests of single-speed, three-phase, cage-induction motors

SNI IEC 60034-18-1:2011 旋转电机 第18部分：绝缘系统的功能评估 第1节：：一般说明

Rotating electrical machines Part 18: Functional evaluation of insulation systems Section 1: General instructions

BS EN 60034-1:2010 旋转电机.性能和评级

This part of IEC 60034 is applicable to all rotating electrical machines except those covered by other IEC standards, for example, IEC 60349 [10]1). Machines within the scope of this standard may also be subject to superseding, modifying or additional requirements in other publications, for example, IEC 60079 [8] and IEC 60092 [9]. NOTE If particular clauses of this standard are modified to meet special applications, for example machines subject to radioactivity or machines for aerospace, all other clauses apply insofar as they are compatible.

Rotating electrical machines. Rating and performance

DS/EN 60034-1/Corr. Oct.:2010 旋转电机 第1部分：额定值和性能

This part of IEC 60034 is applicable to all rotating electrical machines except those coveredby other IEC standards, for example, IEC 60349 [10]2).Machines within the scope of this standard may also be subject to superseding, modifying or additional requirements in other publications, for example, IEC 60079 [8] and IEC 60092 [9].NOTE If particular clauses of this standard are modified to meet special applications, for example machines subject to radioactivity or machines for aerospace, all other clauses apply insofar as they are compatible.

Rotating electrical machines - Part 1: Rating and performance

DS/EN 60034-1:2010 旋转电机 第1部分：额定值和性能

This part of IEC 60034 is applicable to all rotating electrical machines except those coveredby other IEC standards, for example, IEC 60349 [10]2).Machines within the scope of this standard may also be subject to superseding, modifying or additional requirements in other publications, for example, IEC 60079 [8] and IEC 60092 [9].NOTE If particular clauses of this standard are modified to meet special applications, for example machines subject to radioactivity or machines for aerospace, all other clauses apply insofar as they are compatible.

Rotating electrical machines - Part 1: Rating and performance

IEC 2/1618/CD:2010 IEC/TS 60034-27-2,版本1:旋转电动机.第27-2部分:旋转电机定子绕组在线局部漏电测量

IEC/TS 60034-27-2, Ed. 1: Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines

DS/EN 60034-2-2:2010 旋转电机 第 2-2 部分：通过测试确定大型机器的单独损耗的具体方法 IEC 60034-2-1 的补充

IEC 60034-2-2:2010 applies to large rotating electrical machines and establishes additional methods of determining separate losses and to define an efficiency supplementing IEC 60034-2-1. These methods apply when full-load testing is not practical and result in a greater uncertainty.

Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1

DS/EN 60034-18-1:2010 旋转电机 第 18-1 部分：绝缘系统的功能评估 一般指南

IEC 60034-18-1:2010 deals with the general guidelines for functional evaluation of electrical insulation systems, used or proposed to be used in rotating electrical machines within the scope of IEC 60034-1, in order to qualify them. The main changes of this new edition with respect to the previous one are as follows: - provides general guidelines for functional evaluation of different types of windings as before but beyond that for electrical evaluation of windings which are electrically stressed by converter-supply; - is now focused on general guidelines with all technical details of procedures and qualification principles moved to the subsequent parts; -

Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines

DIN EN 60034-2-2:2010 旋转电机.第2-2部分:测定来自抽查大型机械的个别损耗特定方法.IEC 60034-2-1(IEC 60034-2-2-2010)标准的补充件.德文版本EN 60034-2-2-2010

Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 (IEC 60034-2-2:2010); German version EN 60034-2-2:2010

BS EN 60034-2-2:2010 旋转电机.从试验确定的大型机器单独损失的专门方法.IEC 60034-2-1标准补充件

This part of IEC 60034 applies to large rotating electrical machines and establishes additional methods of determining separate losses and to define an efficiency supplementing IEC 60034-2-1. These methods apply when full-load testing is not practical and result in a greater uncertainty. The specific methods described are: – Calibrated-machine method. – Retardation method. – Calorimetric method.

Rotating electrical machines - Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1

DIN V 42962-1:2010 旋转电机的端子布置.第1部分:额定电压6.6kV

Arrangement of terminals for rotating electrical machines - Part 1: Rated voltage 6,6 kV

DIN V 42962-2:2010 旋转电机的端子布置.第2部分:额定电压11kV

Arrangement of terminals for rotating electrical machines - Part 2: Rated voltage 11 kV

IEC 60034-2-2:2010 旋转电机.第2-2部分:试验中大型机械的分离损失测定用特殊方法.补充件IEC 60034-2-1

This part of IEC 60034 applies to large rotating electrical machines and establishes additional methods of determining separate losses and to define an efficiency supplementing IEC 60034-2-1. These methods apply when full-load testing is not practical and result in a greater uncertainty. NOTE In situ testing according to the calorimetric method for full-load conditions is recognized. The specific methods described are: – Calibrated-machine method. – Retardation method. – Calorimetric method.

Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1

IEC 60034-1:2010 旋转电机.第1部分:额定功率与性能

This part of IEC 60034 is applicable to all rotating electrical machines except those covered by other IEC standards@ for example@ IEC 60349 [10]1). Machines within the scope of this standard may also be subject to superseding@ modifying or additional requirements in other publications@ for example@ IEC 60079 [8] and IEC 60092 [9]. NOTE If particular clauses of this standard are modified to meet special applications@ for example machines subject to radioactivity or machines for aerospace@ all other clauses apply insofar as they are compatible. 1) Figures in square brackets refer to the Bibliography.

Rotating electrical machines - Part 1: Rating and performance

DIN EN 60034-15:2010 旋转电机.第15部分:成型定子线圈旋转交流电机的脉冲电压耐压水平(IEC 60034-15-2009).德文版本EN 60034-15-2009

This part of IEC 60034 relates to a.c. machines incorporating form-wound stator coils. It specifies the test procedures and voltages to be applied to the main and interturn insulation of sample coils.

Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines (IEC 60034-15:2009); German version EN 60034-15:2009

UL 1004-6-2009 伺服电机和步进电机

Servo and stepper motors

SANS 60034-15:2009 旋转电机．第15部分：交流电机旋转定子线圈耐冲击电压水平

Relates to a.c. machines incorporating form-wound stator coils. Specifies the test procedures and voltages to be applied to the main and interturn insulation of sample coils.

Rotating electrical machines Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

BS EN 60034-15:2009 旋转电机.第15部分:耐用线圈架绕线定子线圈交流旋转电机电平的脉冲电压

This part of IEC 60034 relates to a.c. machines incorporating form-wound stator coils. It specifies the test procedures and voltages to be applied to the main and interturn insulation of sample coils.

Rotating electrical machines - Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

DS/EN 60034-15:2009 旋转电机 第15部分：旋转交流电机的成型绕组定子线圈的冲击电压耐受水平

This part of IEC 60034 relates to a.c. machines incorporating form-wound stator coils. It specifies the test procedures and voltages to be applied to the main and interturn insulation of sample coils.

Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

IEC TS 60034-24:2009 旋转电机.第24部分:在线探测和诊断旋转电机和轴承电流的有源部件的可能缺陷.应用指南

Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide