29.160.01 旋转电机综合 标准查询与下载

KS C IEC 61972-2006(2011) 三相笼型异步电动机损耗和效率的测定方法

Method for determining losses and efficiency of three－phase cage induction motors

SANS 60034-1:2006 旋转电机.第1部分:额定值及性能

Is applicable to all rotating electrical machines except those covered by other IEC standards.

Rotating electrical machines Part 1: Rating and performance

BS EN 60034-1:2006 旋转电机 性能和评级

Rotating electrical machines - Rating and performance

BS EN 60034-1:2004 旋转电机.第1部分:额定值和性能

This standard is applicable to all rotating electrical machines except those covered by other IEC standards —for example, IEC 349. Machines within the scope of this standard may also be subject to superseding, modifying or additional requirements in other publications —for example, IEC 79, and IEC 92. NOTE If particular clauses of this standard are modified to meet special applications, for example machines subject to radioactivity or machines for aerospace, all other clauses apply in so far as they are compatible.

Rotating electrical machines - Part 1: Rating and performance

NF C51-112/A2:2006 旋转电机.第2部分:旋转电机损耗和效率的试验测定方法(牵引车辆用电机除外)

Rotating electrical machines - Part 2 : methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles).

NF C51-112/A1:2006 旋转电机.第2部分:旋转电机损耗和效率的试验测定方法(牵引车辆用电机除外)

Rotating electrical machines - Part 2 : methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles).

CSN EN 60034-1+A1+A2-2005 旋转电机．第1部分：等级和业绩

Zpracovatel: Radka Horská, Elnormservis Brno, I? 16315251 Technická normaliza?ní komise: TNK 129 To?ivé elektrické stroje Pracovník ?eského normaliza?ního institutu: Viera Boro?ová

Rotating motor. Part 1: Rank and Performance

IEEE 1434/COR-2005 旋转电机中局部放电的测量

A review of the nature of partial discharge in machine windings, how it can be measured under both off-line and on-line conditions, how it can be measured for individual form-wound coils or bars, and the significance and limitations of the measured values are covered.

Measurement of partical discharges in rotating machinery

JB/T 8446-2005 隐极式同步发电机转子匝间短路测定方法

本标准规定了隐极式同步发电机转子匝间短路的测量方法及限定值。 本标准适用于隐极式同步发电机转子匝间短路的测量。发电机的交流励磁机转子匝间试验参照本标准执行。 本标准与GB/T 7064《透平型同步电机的技术要求》协调一致。

Methods for the determination of interturn short-circuit in the rotor winding of cylindrical synchronous generators

SANS 60034-11:2005 旋转电机．第11部分：热防护

Specifies rules for rotating electrical machines with rated voltages less than or equal to 660 V, which are in accordance with SANS 60034-1, and which are fitted with built-in thermal protection.

Rotating electrical machines Part 11: Thermal protection

DIN EN 60034-11:2005 旋转电机.第11部分:热防护

Rotating electrical machines - Part 11: Thermal protection (IEC 60034-11:2004); German version EN 60034-11:2004

JB/T 6227-2005 氢冷电机气密封性检验方法及评定

本标准规定了氢冷电机在生产制造、安装、大修验收和正常运行时，其气密封性的检验方法和等级评定。 本标准适用于氢冷电机(发电机、调相机)；也适用于氢冷电机上的零部件，以及氢、泊、水系统管道和与管道联接装置的气密封性检验。

Checking methods and evaluation of sealing of hydrogen-cooled electrical machines

JB/T 10415.1-2005 发电机液体内冷空心导线.第1部分:铜空心导线

JB/T 10415的本部分规定了发电机液冷空心导线的技术要求、试验方法、检验规则、标志、包装和贮存。 本部分适用于发电机用液冷铜拉制空心导线矩形管。

Hollow conductors for liquid inner cooled generator Part 1: Copper hollow conductors

BS EN 60034-11:2004 旋转电机.第11部分:热防护

This part of IEC 60034 specifies requirements relating to the use of thermal protectors and thermal detectors incorporated into the stator windings or placed in other suitable positions in induction machines in order to protect them against serious damage due to thermal overloads. It applies to machines manufactured in accordance with IEC 60034-12 with the voltage limits specified in IEC 60034-12. The protection of bearings and other mechanical parts is not included. NOTE 1 Although temperature values given in this standard are higher than those specified in IEC 60034-1, they are not in conflict. NOTE 2 Additional requirements may apply to particular motor types such as those used in household appliances, or for motors used in explosive atmospheres.

Rotating electrical machines-Part 11:Thermal protection

BS EN 60034-11:2005 旋转电机 第11部分：热防护

Rotating electrical machines - Thermal protection

DS/EN 60034-11:2005 旋转电机第11部分：热保护

This part of IEC 60034 specifies requirements relating to the use of thermal protectors and thermal detectors incorporated into the stator windings or placed in other suitable positions in induction machines in order to protect them against serious damage due to thermal overloads. It applies to machines manufactured in accordance with EN 60034-12 with the voltage limits specified in IEC 60034-12. The protection of bearings and other mechanical parts is not included.

Rotating electrical machines Part 11: Thermal protection

DS/CLC/TR 60034-16-2:2004 旋转电机 第 16-2 部分：同步电机的励磁系统 电力系统研究模型

This report recommends modelling guidelines and appropriate models for excitation systems for use in power system stability studies and includes a nomenclature defining the parameters and variables used.

Rotating electrical machines - Part 16-2: Exciting systems for synchronous machines - Models for power system studies

DS/CLC/TR 60034-16-3:2004 旋转电机 第 16-3 部分：同步电机的励磁系统 动态性能

This section briefly reviews the methods available for investigating the response characteristics of the synchronous machine with its closed-loop excitation control. The general functional block diagram of excitation systems (see figure 1 of IEC 60034-16-2) indicates the various excitation system components which have to be considered in power system stability studies. Description of typical response, performance characteristics and indices as well as performance criteria are given.

Rotating electrical machines - Part 16-3: Excitation systems for synchronous machines - Dynamic performance

DS/CLC/TS 60034-18-34:2004 旋转电机 第 18-34 部分：绝缘系统的功能评估 成型绕组的测试程序 绝缘系统的热机械耐久性评估

This part of IEC 60034 gives test procedures for the evaluation of thermomechanical cycle endurance of insulation systems for form-wound windings. In this evaluation, it is preferred that the performance of a candidate system is compared to that of a reference insulation system with proven service experience.

Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems

IEC 60034-11:2004 旋转电机.第11部分:热防护

本标准规定了装入感应电机定子绕组内部或放置在感应电机其他适当位置，以防止热过载对电机 造成严重损害的热保护器或热探测器的使用要求。 本标准适用于按IEC 60034—12要求制造且电压限值符合IEC 60034—12规定的电机。不适用于轴 承和其他结构部件的保护。 注1：尽管本标准中给定的温度限值比IEC 60034—1中规定的值要高，但两者并不矛盾。 注2：对特殊用途的电机可能会有附加要求，如家用电器或爆炸性气体环境中使用的电机。

Rotating electrical machines - Part 11: Thermal protection