29.160.01 旋转电机综合 标准查询与下载

DS/EN 50209:1999 高压电机棒和线圈绝缘试验

This specification applies to rotating electrical machines with rated voltages from 5 kV to 24 kV inclusive and with rated output from 5 MVA upwards for generators and from 5 MW upwards for motors. Requirements for machines with rated voltage above 24 kV should remain the subject of individual agreement. This specification is also applicable to machines with rated outputs between 1 MVA (1 MW) and 5 MVA (5 MW) and with rated voltages of 5 kV and above, provided its use has been agreed beforehand.

Test of insulation of bars and coils of high-voltage machines

SNI 04-6189-1999 交流电压绕线电阻的测试

Measurements of winding resistance of an alternating current machines during operation at alternating voltage

CNS 11445-2-1998 旋转电机损失与效率试验法

本标准适用于 CNS 11445-1[旋转电机之定额及性能总则]范围内所有大小尺度之直流机、交流同步机和感应机。然而，这项原则也可以应用到其它型式之旋转机，诸如旋转变流机交流换向器电动机和单相感应电动机，在上述旋转机、其它决定损失之方法也普遍的使用者。但不适用于牵引车

Method for determining lossess and efficiency of rotating electrical machinery from test (excluding machines for traction vehicles)

CNS 11445.2-1998 旋转电机损失与效率试验法

Method for determining lossess and efficiency of rotating electrical machinery from test (excluding machines for traction vehicles)

CNS 11445.8-1998 旋转电机端子符号及旋转方向

Terminal markings and direction of rotation of rotating machines

CNS 11445-8-1998 旋转电机端子符号及旋转方向

本标准规定交流旋转电机 ( 不含交流整流子机 ) 及直流旋转电机之下列项目。(1) 端子符号(2) 旋转方向(3) 端子符号及旋转方向之关系

Terminal markings and direction of rotation of rotating machines

BS EN 60034-1:1998 旋转电机.额定值和性能

Gives ratings and performance for all rotating machines except those covered by other specific standards. Machines within the scope of this standard may also be subjected to superseding, modifying or additional requirements in other publications.

Rotating electrical machines - Rating and performance

MT/T 767-1998 矿用隔爆型直流电动机

本标准规定了矿用隔爆型直流电动机(以下简称电动机)的产品分类、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于煤矿井下含有煤尘、瓦斯与空气的爆炸性气体混合物场所使用的电动机。 本标准不适用于矿用防爆型蓄电池车辆用直流牵引电动机。

Flameproof mining DC.motor

SJ 50971/2-1998 J250LYX12A型永磁式直流力矩电动机详细规范

Torque motor,d.c.Permanent magnet types J250LYX12A,detail specification for

NF C51-111:1997 旋转电机.第1部分:额定值及性能(欧洲标准EN 60 034-1)

ROTATING ELECTRICAL MACHINES. PART 1 : RATING AND PERFORMANCE. (EUROPEAN STANDARD EN 60 034-1).

IEC 60034-1/AMD1:1997 旋转电机 第1部分:额定值和性能 修改1

Rotating electrical machines - Part 1: Rating and performance; Amendment 1

NF C51-350:1997 旋转电机.第15部分:带模绕定子线圈的旋转交流电机的耐脉冲电压等级

Rotating electrical machines. Part 15 : impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils.

ANSI/IEEE 421.3:1997 同步电机励磁系统高压试验要求

Establishes requirements for high-potential dielectric testing of complete excitation systems and their components for synchronous machines.

Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines

IEC 60034-8/AMD2:1996 旋转电机.第8部分:旋转电机的终端标志与旋转方向.修改件2

Rotating electrical machines - Part 8: Terminal marking and direction of rotation of rotating machines; Amendment 2

IEC 60034-1:1996 旋转电机.第1部分:额定值和性能

Rotating electrical machines - Part 1: Rating and performance

IEEE 620-1996 松鼠笼诱导机用放热极限曲线介绍指南

Defines thermal limit curves for induction machines, establishes a standard procedure for the presentation of these curves, and provides guidance for the interpretation and use of these curves for machine thermal protection.

Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines

DIN EN 60034-6:1996 旋转电机.第6部分:冷却方法(IC码)

Rotating electrical machines - Part 6: Methods of cooling (IC-Code) (IEC 60034-6:1991); German version EN 60034-6:1993

IEEE Std 620-1996 鼠笼式感应电机热极限曲线表示的 IEEE 指南

Defines thermal limit curves for induction machines, establishes a standard procedure for the presentation of these curves, and provides guidance for the interpretation and use of these curves for machine thermal protection.

IEEE Guide for the presentation of thermal limit curves for squirrel cage induction machines

SJ 50971/1-1995 J320LYX03G型永磁式直流力矩电动机详细规范

Type J320LYX03G torque motors,d.c.permanent magnet,detail specification for

DS/EN 60034-18-21:1996 旋转电机 第18部分：绝缘系统的功能评估 第 21 节：绕线绕组的测试程序 热评估和分类

This section of IEC 34-18 gives test procedures for the thermal evaluation and classification of insulation systems used or proposed for use in wire-wound alternating current (a.c.) or direct current (d.c.) rotating electrical machines. The test procedures are comparative in that the performance of a candidate insulation system is compared to that of a reference insulation system with proven service experience.

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 21: Test procedures for wire-wound windings - Thermal evaluation and classification