29.160.99 有关旋转电机的其他标准 标准查询与下载

EN ISO 29461-1:2013 旋转机械的进气过滤系统.试验方法.第1部分:静态过滤器元件

In ISO 29461 werden Prufverfahren fur die Ermittlung der Leistung von Partikelluftfiltern undfiltereinlasssysteme festgelegt, die Rotationsmaschinen, z. B. stationare Gasturbinen, Kompressoren und andere stationare Verbrennungskraftmaschinen. Die Norm gilt fur Luftfilter mit einem Anfangswirkungsgrad bis 99,9 % bei Partikelgrosen von 0,4 µm. Filter mit hoheren Wirkungsgraden werden nach anderen Normen (z. B. EN 1822) gepruft und klassifiziert. Diese Verfahren sind vorgesehen fur Filter, die bei Volumenstromen im Bereich von 0,25 m 3 /s (900 m 3 /h) bis zu 1,67 m 3 /s (6000 m 3 /h) betrieben werden. Der vorliegende Teil der ISO 29461 bezieht sich auf statische Filtersysteme (Sperrfilter), kann aber, wenn zutreffend, unter bestimmten Umstanden auch auf andere Filterarten und -systeme angewendet werden. In diesem Normteil der ISO 29461 werden zwei Verfahren zur Bestimmung des Wirkungsgrades angewendet: Messung des Partikelwirkungsgrads (unter Bezug auf Partikelanzahl und -grose); Messung des gravimetrischen Wirkungs- oder Abscheidegrads (gewichteter Massenanteil des abgeschiedenen Beladungsstaubes). Um Aussagen uber die Wirksamkeit des Abbaus elektrostatischer Ladungen zu ermoglichen, muss eine Probe aus einem planen Filtermedium oder aus einem Filtermedienpaket eines identischen Filters konditioniert (elektrostatisch entladen) werden. Nach Bestimmung des Anfangswirkungsgrads des unbehandelten Filters wird bis zum Erreichen der Enddruckdifferenz stufenweise Staub auf das Filter aufgegeben. Daraus sind dann Angaben uber einen bestaubten Filter zu bestimmen. Die nach diesem Teil der ISO 29461 Norm fur die Leistung ermittelten Ergebnisse konnen nicht unmittelbar zur quantitativen Vorhersage der Leistung bezogen auf Wirkungsgrad und Lebensdauer fur den jeweiligen Anwendungsfall des Filters verwendet werden. Andere Faktoren, die sich auf die Leistung auswirken und berucksichtigt werden mussen, werden in den Anhangen beschrieben.

Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements

ISO 29461-1:2013 旋转机械的进气过滤系统.试验方法.第1部分:静态过滤器元件

Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements

DB35/T 1111-2011 电动卷门机

本标准规定了电动卷门机的术语和定义、分类、代号和型号、要求、试验方法、检验规则、使用说 明、包装、运输和贮存。 本标准适用于工业与民用建筑用上、下启闭卷门的电动卷门机（以下简称卷门机）。 本标准不适用于防火、防爆卷门用的卷门机，不适用于彩钢整板卷门机和管状电机卷门机。

Electric roller door machine

DS/EN 61800-7-304:2008 可调速电力驱动系统 第 7-304 部分：电力驱动系统配置文件的通用接口和使用 配置文件类型 4 到网络技术的映射

IEC 61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model.The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws.This part of IEC 61800-7 specifies the mapping of the profile type 4 (SERCOS) specified in IEC 61800-7-204 onto different network technologies.– SERCOS I / II, see Clause 5,– SERCOS III, see Clause 6,– EtherCAT, see Clause 7.

Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies

DS/EN 61800-7-204:2008 可调速电力驱动系统 第 7-204 部分：电力驱动系统配置文件的通用接口和使用 配置文件类型 4 规范

IEC 61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model.The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws.This part of IEC 61800-7 specifies profile type 4 for Power Drive Systems (PDS). Profile type 4 can be mapped onto different communication network technologies.

Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification

DS/EN 61800-7-203:2008 可调速电力驱动系统 第 7-203 部分：电力驱动系统配置文件的通用接口和使用 配置文件类型 3 规范

IEC 61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model.The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws.This part of IEC 61800-7 specifies profile type 3 for Power Drive Systems (PDS). Profile type 3 can be mapped onto different communication network technologies.

Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification

DS/EN 61800-7-302:2008 可调速电力驱动系统 第 7-302 部分：电力驱动系统配置文件的通用接口和使用 配置文件类型 2 到网络技术的映射

IEC 61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model.The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws.This part of IEC 61800-7 specifies the mapping of the profile type 2 (CIP MotionTM) specified in IEC 61800-7-202 onto different network technologies.– DeviceNet™ (CP 2/3), see Clause 5,– ControlNet™ (CP 2/1), see Clause 6,– EtherNet/IP™ (CP 2/2), see Clause 7.

Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies

DS/EN 61800-7-303:2008 可调速电力驱动系统 第 7-303 部分：通用接口和电力驱动系统配置文件的使用 配置文件类型 3 到网络技术的映射

IEC 61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model.The functions specified in this part of IEC 61800-7 are not intended to ensure functionalsafety. This requires additional measures according to the relevant standards, agreements and laws.This part of IEC 61800 7 specifies how the profile type 3 (PROFIdrive) specified in IEC 61800-7-203 onto different network technologies.– PROFIBUS DP, see Clause 4,– PROFINET IO, see Clause 5.

Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies

DS/EN 61800-7-202:2008 可调速电力驱动系统 第 7-202 部分：通用接口和电力驱动系统配置文件的使用 配置文件类型 2 规范

IEC 61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model.The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws.This part of IEC 61800-7 specifies profile type 2 (CIP Motion™) for Power Drive Systems (PDS). Profile type 2 can be mapped onto different communication network technologies.

Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification

DS/EN 61800-7-201:2008 可调速电力驱动系统 第 7-201 部分：通用接口和电力驱动系统配置文件的使用 配置文件类型 1 规范

IEC 61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model.The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws.This part of IEC 61800-7 specifies profile type 1 for Power Drive Systems (PDS). Profile type 1 can be mapped onto different communication network technologies.

Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification

DS/EN 61800-7-1:2008 可调速电力驱动系统 第 7-1 部分：通用接口和电力驱动系统配置文件的使用 接口定义

IEC 61800-7 specifies profiles for power drive systems (PDS) and their mapping to existingcommunication systems by use of a generic interface model.The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws.This part of IEC 61800-7 specifies a generic interface between power drive system(s) (PDS) and the application control program in a controller. The generic PDS interface is not specific to any particular communication network technology. Annexes of this part of IEC 61800-7 specify the mapping of the different drive profiles ty

Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition

DS/EN 61800-7-301:2008 可调速电力驱动系统 第 7-301 部分：电力驱动系统配置文件的通用接口和使用 配置文件类型 1 到网络技术的映射

IEC 61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model.The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws.This part of IEC 61800-7 specifies the mapping of the profile type 1 (CiA 402) specified in IEC 61800-7-201 onto different network technologies.– CANopen, see Clause 5;– EtherCAT, see Clause 6;– ETHERNET Powerlink, see Clause 7.

Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies

IEEE 421.1-2007 同步机用励磁系统的定义

This standard defines elements and commonly used components in excitation systems and contains definitions for excitation systems applied to synchronous machines. An included annex contains one-line block diagrams of some typical excitation systems. These are presented to illustrate the defined terminology referenced in this standard and clarify the understanding of the excitation control system.

Standard Definitions for Excitation Systems for Synchronous Machines

IEEE 1415-2006 感应机械维修测试和故障分析指南

This guide provides maintenance testing and failure analysis guidance for form-wound, squirrel cage, induction machinery rated up to 15 kV. It addresses the following machine systems: Stator (Winding and Core) Rotor (Winding and Core) Vibration and Noise Bearings and Shafts Structure, Frame Ventilation Accessories. This guide is intended for use by personnel at the facility or corporate office responsible for the operation and maintenance of large induction machines. It is a guide to aid the thought processes and procedures necessary to determine root causes for failures.

Induction Machinery Maintenance Testing and Failure Analysis

ANSI/IEEE 1434:2005 旋转电机局部放电测量指南

A review of the nature of partial discharge in machine windings, how it can be measured under both off-line and on-line conditions, how it can be measured for individual form-wound coils or bars, and the significance and limitations of the measured values are covered.

Guide to the Measurement of Partial Discharges in Rotating Machinery

ANSI/IEEE 421.4:2004 励磁系统规范制订指南

Provides to the specification writer the necessary material to prepare a specification for the procurement of an excitation system for a synchronous machine.

Guide for the Preparation of Excitation System Specifications

CNS 11997-1987 船用交流电动机用起动器及控制器

本标准适用于船用交流三相感应电动机用起动器及控制器（以下简称起动器）。

Starters and Controllers for A.C Motor in Ships

DIN 46062:1970 直流电动机和交流滑环感应电动机的起动器

Starter for d.c.-motors and a.c.-slip-ring induction motors

Starter for d.c.-motors and a.c.-slip-ring induction motors

prEN ISO 29461-4 旋转机械进气过滤系统 第4部分：沿海和近海环境中静态过滤系统的测试方法 (ISO/DIS 29461-4:2024)

The ISO 29461 standards specifies methods and procedures to determine the performance of particulate air filters used in air intake filter systems for rotary machinery such as gas turbines, compressors and other internal combustion engines. The ISO 29461-4 of the standard specifies methods for performance testing of individual filter elements and of the complete filtration system used in Marine and offshore environments. This procedure is intended for filter elements and filter systems which operate at flow rated up to 8000 m3/h per filter element.

Air intake filter systems for rotary machinery - Part 4: Test methods for static filter systems in coastal and offshore environments (ISO/DIS 29461-4:2024)

FprEN ISO 29461-3 旋转机械的空气过滤器进气系统 测试方法 第3部分：过滤器元件的机械完整性 (ISO/FDIS 29461-3:2024)

8. Scope The ISO 29461 series specifies methods and procedures to determine the performance of particulate air filters used in air intake filter systems for rotary machinery such as gas turbines, compressors and other internal combustion engines. The ISO 29461-3 of the standard specifies a method and procedure to test the mechanical integrity (“Burst Test”) of individual filter elements up to an abnormal final test pressure drop of maximum 6250 Pa. Any other customer defined final pressure drop up to a maximum of 8000 Pa shall be reported as variation from the standard. It is within the liability of the user to define the maximum possible value (lower or higher) for a certain application and to define the burst strength requirements for this test procedure. As the pressure drops under typical operating conditions are on a much lower level, it is not intended to specify a final pressure drop for any application within this procedure. This procedure is intended for all types of filter elements (e.g. V-bank cassette filters or filter cartridges) used in the final stage(s) of an Air Intake Filter Systems for Rotary Machinery in various environmental conditions, as e.g. in marine applications. These filters are operating at flow rates within the range of 0,25 m³/s (900 m³/h) up to 2,23 m³/s (8000 m³/h), no matter if it is used in a static or pulse cleaned air intake system.

Air filter intake systems for rotary machinery - Test methods - Part 3: Mechanical integrity of filter elements (ISO/FDIS 29461-3:2024)