29.200 整流器、转换器、稳压电源 标准查询与下载

IEC 60700-2:2016+AMD1:2021 CSV 高压直流输电用晶闸管阀第2部分:术语

Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology

IEC 60700-2:2016/AMD1:2021 高压直流输电用晶闸管阀第2部分:术语

Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology

YD/T 3946-2021 通信基站用蓄电池组共用管理设备技术要求与试验方法

Technical requirements and test methods for shared management equipment of battery packs used in communication base stations

LST EN IEC 62040-3:2021 不间断电源系统（UPS） 第3部分：指定性能和测试要求的方法（IEC 62040-3:2021）

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements (IEC 62040-3:2021)

T/GZBC 50-2021 亚湿热环境下新能源汽车充电设备技术规范

     本文件规定了亚湿热环境下新能源汽车充电设备的安装使用场景分类、技术要求、试验方法和检验规则。     本文件适用于评价亚湿热环境下安装使用的新能源汽车充电设备的环境适应性和特殊性能要求。     本文件不适用于车载充电机。

Technical specification for new energy vehicle charging equipment in subtropical damp-heat climate

BS PD IEC TR 62001-1:2021 高压直流（HVDC）系统 交流滤波器规范和设计评估指南 概述

High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters. Overview

T/XQGX 001-2021 智能型充放电装置

本标准规定了智能型充放电装置通用的产品型号、技术要求、试验方法、检验规则、标志、包装、运输和贮存要求。

Smart charge and discharge machine

OVE EN 60335-2-29/A1-2021 家用和类似用途电器 安全 第 2-29 部分 电池充电器的特殊要求（修正案）（英文版）

Household and similar electrical appliances - Safety - Part 2-29 - Particular requirements for battery chargers (Amendment) (english version)

OVE EN IEC 60633:2021 高压直流（HVDC）输电 词汇（（IEC 60633:2019）EN IEC 60633:2019）（德文版）

High-voltage direct current (HVDC) transmission - Vocabulary ((IEC 60633:2019) EN IEC 60633:2019) (german version)

BS EN IEC 62040-3:2021 不间断电源系统(UPS). 第3部分: 规定性能的方法和试验要求

Uninterruptible power systems (UPS). Method of specifying the performance and test requirements

PN-EN IEC 62040-1-2019-11/A11-2021-07 E 不间断电源系统（UPS） 第1部分：安全要求

Uninterruptible power systems (UPS)--Part 1: Safety requirements

IEC TR 62001-1:2021 高压直流（HVDC）系统 交流滤波器的规范和设计评估指南 第1部分：概述

High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 1: Overview

IEC TR 62001-1:2021 RLV 高压直流（HVDC）系统.交流滤波器规范和设计评估指南.第1部分:概述

High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 1: Overview

PN-EN 62477-1-2013-06/A12-2021-07 E 电力电子变换器系统和设备的安全要求 第1部分：总则

Safety requirements for power electronic converter systems and equipment -- Part 1: General

KS C 4310-2021 不间断电源系统

Uninterruptible power system

PN-EN IEC 61803-2021-07 E 确定带有线路换向转换器的高压直流（HVDC）转换器站中的功率损耗（IEC 61803:2020）

Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters (IEC 61803:2020)

GSO IEC TR 62001-2:2021 高压直流 (HVDC) 系统 交流滤波器的规格和设计评估指南 第2部分：性能

IEC TR 62001-2:2016(E), which is a Technical Report, provides guidance on the performance aspects and verification of performance of harmonic filters. The scope of this document covers AC side filtering for the frequency range of interest in terms of harmonic distortion and audible frequency disturbances. It excludes filters designed to be effective in the PLC and radio interference spectra. This document concerns the "conventional" AC filter technology and line-commutated high-voltage direct current (HVDC) converters. This first edition of IEC TR 62001-2, together with IEC TR 62001-1, IEC TR 62001-3 and IEC TR 62001-4, cancels and replaces IEC TR 62001 published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC TR 62001: a) expanded and supplemented Clause 19, and Annex B; b) new Clause 3 on current-based interference criteria; c) new annexes on induced noise calculation with Dubanton equations; d) addition of a TIF requirement in a technical specification; e) specification of IT limits dependent on network impedance and on the impact of AC network harmonic impedance; and f) specification of voltage level on the filter design necessary to fulfil an IT criterion.

High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 2: Performance

GSO IEC 62477-2:2021 电力电子转换器系统和设备的安全要求 第2部分：1 000 V AC 或 1 500 V DC 至 36 kV AC 或 54 kV DC 电力电子转换器

IEC 62477-2:2018 applies to power electronic converter systems (PECS) and equipment, their components for electronic power conversion and electronic power switching, including the means for their control, protection, monitoring and measurement, such as with the main purpose of converting electric power, with rated system voltages from 1 000 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC. This document can also be used as a reference standard for product committees producing product standards for adjustable speed electric power drive systems (PDS), standalone uninterruptible power systems (UPS), and stabilized DC power supplies. For PECS for which no product standard exists, this document provides minimum requirements for safety aspects.  This document has the status of a group safety publication in accordance with IEC Guide 104 for power electronic converter systems and equipment for solar, wind, tidal, wave, fuel cell or similar energy sources. According to IEC Guide 104, one of the responsibilities of technical committees is, wherever applicable, to make use of basic safety publications and/or group safety publications in the preparation of their product standards. This document establishes a common terminology for safety aspects relating to PECS and equipment, establishes minimum requirements for the coordination of safety aspects of interrelated parts within a PECS, establishes a common basis for minimum safety requirements for the PEC portion of products that contain PEC, specifies requirements to reduce risks of fire, electric shock, thermal, energy and mechanical hazards, during use and operation and, where specifically stated, during service and maintenance, specifies minimum requirements to reduce risks with respect to pluggable and permanently connected equipment, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the equipment in the manner prescribed by the manufacturer, establishes an arc fault rating label requirement with testing instructions for PEC and PECS, and covers power electronic converters and systems in open type design, which are catalog (pre-defined commercially available) power electronic converters and systems or engineered solutions from same. This document does not cover telecommunications apparatus other than power supplies to such apparatus, functional safety aspects as covered by, for example, IEC 61508 (all parts), electrical equipment and systems for railways applications and electric vehicles, and power electronic converters and systems in open type design, which are – in their major part – dimensioned, designed and constructed according to the user’s individual requirements and specifications and follow power installation standards, for example IEC 61936-1.

Safety requirements for power electronic converter systems and equipment - Part 2: Power electronic converters from 1 000 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC

GSO IEC 62909-1:2021 双向并网电源转换器 第1部分：一般要求

IEC 62909-1:2017 specifies general aspects of bi-directional grid-connected power converters (GCPC), consisting of a grid-side inverter with two or more types of DC-port interfaces on the application side with system voltages not exceeding 1 000 V AC or 1 500 V DC. In special cases, a GCPC will have only one DC-port interface, which is connected to a bidirectional energy-storage device. This document includes terminology, specifications, performance, safety, system architecture, and test-case definitions. The "system architecture" defines interaction between the inverter and converters. Requirements which are common, general, and independent of special characteristics of individual generators and bi-directional storages are defined. This document does not cover uninterruptible power supply (UPS) systems, which fall under the scope of IEC 62040 (all parts). Requirements for internal and external digital communication might be necessary; the interface requirements including communication with distributed energy resources are provided in a future part of IEC 62909. All EMC requirements are defined by reference to existing IEC standards. External communication requirements are out of scope of this document.

Bi-directional grid connected power converters - Part 1: General requirements

GSO IEC TR 62001-4:2021 高压直流 (HVDC) 系统 交流滤波器的规范和设计评估指南 第4部分：设备

IEC TR 62001-4:2016(E), which is a Technical Report, provides guidance on the basic data of AC side filters for high-voltage direct current (HVDC) systems and their components such as ratings, power losses, design issues and special applications, protection, seismic requirements, equipment design and test parameters. This document covers AC side filtering for the frequency range of interest in terms of harmonic distortion and audible frequency disturbances. It excludes filters designed to be effective in the power line carrier (PLC) and radio interference spectra. It concerns the "conventional" AC filter technology and line-commutated HVDC converters. This first edition of IEC TR 62001-4, together with IEC TR 62001-1, IEC TR 62001-2 and IEC TR 62001-3, cancels and replaces IEC TR 62001 published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC TR 62001: a) Clauses 10 to 16, 18, Annexes F and G have been expanded and supplemented.

High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 4: Equipment