29.220.01 标准查询与下载
共找到 243 条与 相关的标准，共 17 页
本标准规定了通信用蓄电池架的术语和定义、分类、要求、试验方法、检验规则和包装、标志、运输和贮存。 本标准适用于通信用蓄电池架，不适用于蓄电池柜。
Battery rack for telecommunication
- ICS
- 29.220.01
- CCS
- M41
- 发布
- 2017-04-12
- 实施
- 2017-07-01
本标准规定了带式涂板机设备的技术要求、试验方法、检验规则及标志、包装、运输、贮存等。
Lead-acid battery plate coating and filling equipment part 1: belt coating machine
- ICS
- 29.220.01
- CCS
- C3521
- 发布
- 2016-12-26
- 实施
- 2016-12-30
This International Standard specifies test methods and requirements for primary and secondary (rechargeable) lithium cells and batteries to ensure their safety during transport other than for recycling or disposal. Requirements specified in this standard do not apply in those cases where special provisions given in the relevant regulations, listed in 7.3, provide exemptions. NOTE Different standards may apply for lithium-ion traction battery systems used for electrically propelled road vehicles.
Safety of primary and secondary lithium cells and batteries during transport
- ICS
- 29.220.01
- CCS
- K84
- 发布
- 2016-12
- 实施
- 2019-04-24
General technical requirements for lithium iron phosphate battery packs for communication base stations and energy storage
- ICS
- 29.220.01
- CCS
- K 82
- 发布
- 2016-04-29
- 实施
- 2016-05-29
General test method for basic properties of alkaline battery separators
- ICS
- 29.220.01
- CCS
- K82
- 发布
- 2016-04-05
- 实施
- 2016-09-01
Intelligent charging equipment for police walkie-talkie
- ICS
- 29.220.01
- CCS
- K 84
- 发布
- 2015-11-06
- 实施
- 2016-01-01
Safety of primary and secondary lithium cells and batteries during transport (IEC 62281:2012); German version EN 62281:2013
- ICS
- 29.220.01
- CCS
- T90
- 发布
- 2013-10
- 实施
- 2013-10-01
Safety of primary and secondary lithium cells and batteries during transport
- ICS
- 29.220.01
- CCS
- K82
- 发布
- 2013-08-31
- 实施
- 2013-08-31
Technical Specifications for Power Supply and Guarantee of Electric Vehicles Traction Battery System Maintenance
- ICS
- 29.220.01
- CCS
- K82
- 发布
- 2012-05-07
- 实施
- 2012-05-07
IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications
- ICS
- 29.220.01
- CCS
- K84
- 发布
- 2012
- 实施
本标准规定了蓄电池智能快速充电机的分类、要求、实验方法、检验规则、标志、包装、运输、储存。本标准适用于蓄电池智能快速充电机。
Battery Intelligent Fast Charger
- ICS
- 29.220.01
- CCS
- K84
- 发布
- 2011/11/30
- 实施
- 2011/11/30
General Technical Specifications for Lithium Iron Phosphate Cathode Material (for Li-ion Batteries)
- ICS
- 29.220.01
- CCS
- K 80
- 发布
- 2011-10-12
- 实施
- 2011-11-01
General technical specifications for lithium-iron disulfide batteries
- ICS
- 29.220.01
- CCS
- K 82
- 发布
- 2011-10-12
- 实施
- 2011-11-01
These requirements cover portable primary (nonrechargeable) and secondary (rechargeable) batteries for use as power sources in products. These batteries consist of either a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by chemical reaction. These requirements are intended to reduce the risk of fire or explosion when batteries are used in a product. The proper use of these batteries in a particular application is dependent on their use in a complete product that complies with the requirements applicable to such a product. These requirements are intended to cover batteries for general use and do not include the combination of the battery and the host product which are covered by requirements in the host product standard. These requirements are also intended to reduce the risk of injury to persons due to fire or explosion when batteries are removed from a product to be transported, stored, or discarded. These requirements do not cover the toxicity risk that results from the ingestion of a battery or its contents, nor the risk of injury to persons that occurs if a battery is cut open to provide access to its contents
CSDS 07/11/2005 (2p)
- ICS
- 29.220.01
- CCS
- 发布
- 2011
- 实施
- 0000-00-00
This guide provides information on the differences between stationary standby and stationary cycling applications and appropriate battery management strategies in cycling operations. While the primary emphasis is on lead-acid batteries, information is also provided on alternative and emerging storage technologies. The management of battery systems in stationary standby service is covered in other IEEE documents and is beyond the scope of this guide.
IEEE Guide for Application and Management of Stationary Batteries Used in Cycling Service
- ICS
- 29.220.01
- CCS
- K84
- 发布
- 2008-11-21
- 实施
This guide provides information on the differences between stationary standby and stationary cycling applications and appropriate battery management strategies in cycling operations.
Guide for Application and Management of Stationary Batteries Used in Cycling Service
- ICS
- 29.220.01
- CCS
- K84
- 发布
- 2008
- 实施
These requirements cover portable primary (nonrechargeable) and secondary (rechargeable) batteries for use as power sources in products. These batteries consist of either a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by chemical reaction. These requirements are intended to reduce the risk of fire or explosion when batteries are used in a product. The proper use of these batteries in a particular application is dependent on their use in a complete product that complies with the requirements applicable to such a product. These requirements are intended to cover batteries for general use and do not include the combination of the battery and the host product which are covered by requirements in the host product standard. These requirements are also intended to reduce the risk of injury to persons due to fire or explosion when batteries are removed from a product to be transported, stored, or discarded. These requirements do not cover the toxicity risk that results from the ingestion of a battery or its contents, nor the risk of injury to persons that occurs if a battery is cut open to provide access to its contents
CSDS 01/08/2007 (10p)
- ICS
- 29.220.01
- CCS
- 发布
- 2007-01-01
- 实施
