29.220.01 标准查询与下载

UL 2054 BULLETIN-2007 家用和商用电池组UL安全性标准.评议提交截止日期:2007年11月9日

These requirements cover portable primary (nonrechargeable) and secondary (rechargeable) batteries for use as power sources in products. These batteries consist of either a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by chemical reaction. These requirements are intended to reduce the risk of fire or explosion when batteries are used in a product. The proper use of these batteries in a particular application is dependent on their use in a complete product that complies with the requirements applicable to such a product. These requirements are intended to cover batteries for general use and do not include the combination of the battery and the host product which are covered by requirements in the host product standard. These requirements are also intended to reduce the risk of injury to persons due to fire or explosion when batteries are removed from a product to be transported, stored, or discarded. These requirements do not cover the toxicity risk that results from the ingestion of a battery or its contents, nor the risk of injury to persons that occurs if a battery is cut open to provide access to its contents

UL Standard for Safety Household and Commercial Batteries COMMENTS DUE: November 9, 2007

GOST R IEC 62281-2007 锂电池和锂蓄电池在运输中的安全性

Safety of primary and secondary lithium cells and batteries during transport

UL 1989-2006 备用蓄电池

These requirements cover instrument batteries, enclosed batteries, emergency lighting and power batteries and uninterruptible power supply batteries. These requirements only address potential risks unique to the utilization of a battery supply in a product. Products employing a battery supply shall comply with the basic requirements contained in this standard applicable to the type of product and its intended use. These requirements do not cover risks that may be unique to certain cell chemistries, such as the fire and explosion risks of lithium batteries. Additional investigations are required to evaluate such risks. The investigation of a family or group of batteries may be based on the investigation of batteries representative of the family or group. A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard cannot be judged to comply with this standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with methods employed for development, revision, and implementation of this standard.

Standby batteries

ANSI/IEEE 1184:2006 不可间断电源系统用电池的指南

Discusses various battery systems so that the user can make informed decisions on selection, installation design, installation, maintenance, and testing of stationary standby batteries used in Uninterruptible Power Supply (UPS) systems.

Guide for Batteries for Uninterruptible Power Supply Systems

SJ 20941-2005 锂离子蓄电池通用规范

本规范规定了军用锂离子单体蓄电池的共性要求、质量保证规定和交货准备。 本规范适用于8Ah以下的小容量军用锂离子单体蓄电池（以下简称“电池”），大容量锂离子单体蓄电池可参照使用。

General specification for li-ion rechargeable cell

UL 2054 BULLETINS-2006 CSDS 11/01/2006 (4p)； CSDS 07/21/2006 (10p)

These requirements cover portable primary (nonrechargeable) and secondary (rechargeable) batteries for use as power sources in products. These batteries consist of either a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by chemical reaction. These requirements are intended to reduce the risk of fire or explosion when batteries are used in a product. The proper use of these batteries in a particular application is dependent on their use in a complete product that complies with the requirements applicable to such a product. These requirements are intended to cover batteries for general use and do not include the combination of the battery and the host product which are covered by requirements in the host product standard. These requirements are also intended to reduce the risk of injury to persons due to fire or explosion when batteries are removed from a product to be transported, stored, or discarded. These requirements do not cover the toxicity risk that results from the ingestion of a battery or its contents, nor the risk of injury to persons that occurs if a battery is cut open to provide access to its contents

CSDS 11/01/2006 (4p); CSDS 07/21/2006 (10p)

ANSI/IEEE 1491:2005 固定装置中选择和使用蓄电池监控设备的指南

Discusses operational parameters that may be observed by battery monitoring equipment used in stationary applications, and the relative value of such observations.

Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications

ASTM D7131-05 嫁接电池分离器中离子交换容量（IEC）测定的标准试验方法

Nickel-metal hydride (Ni-MH) cells have a tendency to exhibit high rates of self-discharge that may be caused by contamination within a battery cell. The contamination source has been shown to originate from electrode impurities. Grafted separators can trap and hold these impurities, thus reducing self-discharge rates and enhancing battery quality. This test method determines an ionic exchange capacity that can be used to quantify the level of grafting of a separator. This method is useful for research, quality control, and material specifications.1.1 This test method evaluates an important characteristic of polyolefin or other fibrous nonwoven sheet material intended for use in alkaline battery separator applications. The hydrophilic properties of the material are enhanced by grafting a functional group onto the polyolefin, and this test method is the primary test method to determine the treatment level, that is, level of monomer grafted to the base polymer. This test method can also be used for film or membranes1.2 This test method is intended primarily for testing copolymer-grafted polyolefin materials used as battery separators, but could be used for any grafted material. These separators have radiation-initiated grafting of acrylic acid monomer (for example) onto a polyolefin base-web material to generate hydrophilic sites on the material. This process is a very good method for surface modification of polymer materials, and is used to make separators hydrophilic. Grafting can be accomplished by irradiation on common polymers such as polyethylene, polypropylene and fluoropolymers with various forms of energy, such as UV, gamma rays, electron beams (EB) or X-rays..1.3 The values stated in SI units are to be regarded as the standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Ion Exchange Capacity (IEC) in Grafted Battery Separator

UL 2054 BULLETINS-2005 CSDS 07/11/2005 (2p)

These requirements cover portable primary (nonrechargeable) and secondary (rechargeable) batteries for use as power sources in products. These batteries consist of either a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by chemical reaction. These requirements are intended to reduce the risk of fire or explosion when batteries are used in a product. The proper use of these batteries in a particular application is dependent on their use in a complete product that complies with the requirements applicable to such a product. These requirements are intended to cover batteries for general use and do not include the combination of the battery and the host product which are covered by requirements in the host product standard. These requirements are also intended to reduce the risk of injury to persons due to fire or explosion when batteries are removed from a product to be transported, stored, or discarded. These requirements do not cover the toxicity risk that results from the ingestion of a battery or its contents, nor the risk of injury to persons that occurs if a battery is cut open to provide access to its contents

CSDS 07/11/2005 (2p)

UL 2054-2004 安全家用和商用电池的UL标准.第2版

1.1 These requirements cover portable primary (nonrechargeable) and secondary (rechargeable) batteries for use as power sources in products. These batteries consist of either a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by chemical reaction. 1.2 These requirements are intended to reduce the risk of fire or explosion when batteries are used in a product. The proper use of these batteries in a particular application is dependent on their use in a complete product that complies with the requirements applicable to such a product. 1.3 These requirements are intended to cover batteries for general use and do not include the combination of the battery and the host product which are covered by requirements in the host product standard. 1.4 These requirements are also intended to reduce the risk of injury to persons due to fire or explosion when batteries are removed from a product to be transported, stored, or discarded. 1.5 These requirements do not cover the toxicity risk that results from the ingestion of a battery or its contents, nor the risk of injury to persons that occurs if a battery is cut open to provide access to its contents.

UL Standard for Safety Household and Commercial Batteries Second Edition; Reprint with Revisions Through and Including September 21, 2005

IEC 62281:2004 运输途中原电池和二次锂电池及蓄电池组的安全

Specifies test methods and requirements for primary and secondary (rechargeable) lithium cells and batteries to ensure their safety during transport other than for recycling or disposal. Has the status of a group safety publication in accordance with IEC

Safety of primary and secondary lithium cells and batteries during transport

UL 2054 BULLETINS-2003 （草案）6/27/2003（30p）

These requirements cover portable primary (nonrechargeable) and secondary (rechargeable) batteries for use as power sources in products. These batteries consist of either a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by chemical reaction. These requirements are intended to reduce the risk of fire or explosion when batteries are used in a product. The proper use of these batteries in a particular application is dependent on their use in a complete product that complies with the requirements applicable to such a product. These requirements are intended to cover batteries for general use and do not include the combination of the battery and the host product which are covered by requirements in the host product standard. These requirements are also intended to reduce the risk of injury to persons due to fire or explosion when batteries are removed from a product to be transported, stored, or discarded. These requirements do not cover the toxicity risk that results from the ingestion of a battery or its contents, nor the risk of injury to persons that occurs if a battery is cut open to provide access to its contents

(Draft)6/27/2003 (30p)

SJ 20768-1999 FT系列热电池规范

本规范规定了反坦克导弹武器用热电池的-般要求、质量保证规定和交货准备等。 本规范适用于反坦克导弹武器用热电池。

Thermal batteries for FT system specification for

UL 1989-1996 备用蓄电池组

Standby batteries

SJ 52278/1-1996 ER14250、ER34615型锂亚硫酰氯电池详细规范

Type ER14250、ER34615 batteries,non-rechargeable lithium thionyl chloride,detail specification for

SJ 20486-1995 镉镍全密封碱性单体蓄电池总规范

Nickel-cadmium alkaline rechargeable cells,hermetically sealed,general specification for

SJ/T 9167.20-1993 电池充电器

1.1 本标准规定的这些要求适用于，按美国《国家电气法规》规定的额定电压等于或小于600V，预定作为家用或商用给可充电电池充电用的电池充电器。 1.2 这些要求适用于供汽车电池或非汽车电池充电用的，在户内和户外使用的便携式和驻立式电池充电器，以及在户内使用的固定式电池充电器。 1.3 凡不能成其为一个完整装置的电池充电器，以及要取决于在最终产品内安装方式的电池充电器，是否符合本标准的要求，应按本标准的要求以及最终产品的标准来考核。 1、4 与驱动离心式点火泵的内燃机配用的电池充电器应按本标准的要求以及最终产品的适用要求来考核。 1.5 这些要求不适用于摩托艇或汽艇码头或其它水上产品应用的电池充电器(但预定要永久性安装在汽艇上的电池充电器除外)，也不适用火警信号设施用的电池充电器，或使用电池充电器的设备或系统。

Battery chargers

SJ/T 9550.22-1993 锌-银方形蓄电池质量分等标准

本标准适用于锌-银方形蓄电池的质量分等，本标准只给出了关键性技术指标，不是一个完整的标准，必须与GB 7170及有关详细规范一起使用。

Square zinc-silver batteries--Quality grading standard

SJ/T 9550.32-1993 航天用硅太阳电池方阵质量分等标准

本标准适用于航天用硅太阳电池方阵的质量分等，本标准只给出了关键性技术指标，不是一个完整的标准，必须与GB 6492、GB 6496及有关详细规范一起使用。

Astronautic silicon solar cell matrix--Quality grading standard

SJ/T 9550.31-1993 航天用硅太阳电池单体质量分等标准

本标准适用于航天用硅太阳电池单体电池的质量分等，本标准只给出了关键性技术指标，不是一个完整的标准，必须与GB 6492、GB 6496及有关详细规范一起使用。

Astronautic single silicon solar cells--Quality grading standard