29.220.99 标准查询与下载

KS C IEC 60623:2015 含碱性或其他非酸性电解质的蓄电池和蓄电池组.开口镉镍方形可充电单体电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes — Vented nickel-cadmium prismatic rechargeable single cells

KS C 8521-2015 固定式镍镉可充电单电池

Stationary nickel-cadmium rechargeable single cells

KS C 8547-2015 能源储存装置用液流电池.性能评价方法

Redox flow battery for use in energy storage system — Performance testing

GSO IEC 62259:2014 含有碱性或其他非酸性极化溶液的二次电池和电池组 具有部分气体复合的二次单棱柱形镍镉电池

This International Standard specifies marking, designation, dimensions, tests and requirements for vented nickel-cadmium prismatic secondary single cells where special provisions have been made in order to have partial or, under very specific conditions, full gas recombination. NOTE In this context, "prismatic" refers to cells having rectangular sides and base. When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this standard, the former shall take precedence.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination

GSO IEC 61959:2014 含有碱性材料或其他非酸性电解质的电池和二次电池 便携式（可运输）密封二次电池和电池组的机械测试

This International standard specifies tests and requirements for verifying the mechanical behaviour of sealed portable secondary cells and batteries during handling and normal use. Relevant national and International standards have been taken into consideration. This standard provides test objectives, methods of tests and acceptance criteria relevant to sealed portable secondary cells and batteries of different electrochemical systems (Ni-Cd, Ni-MH and Lithium) sizes and shapes (cylindrical, prismatic and button).

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries

GSO IEC/TS 62393:2014 手动和便携式多媒体设备 移动计算器 测量电池工作时间

This Technical Specification defines the operation-mode mix of portable and hand-held multimedia equipment which can be driven by battery, especially mobile personal computers, in order to clarify the issues to be standardized on the battery run time

Portable and hand-held multimedia equipment - Mobile computers - Battery run-time measurement

GSO IEC 60623:2014 含有碱性或其他非酸性电解质的二次电池和电池组 通风镍镉棱柱形可充电单电池

This International Standard specifies marking, designation, dimensions, tests and requirements for vented nickel-cadmium prismatic secondary single cells. NOTE In this context, "prismatic" refers to cells having rectangular sides and base. When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this standard, the former shall take precedence.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells

GSO IEC 61434:2014 含有碱性电解质或其他非酸性材料的电池和二次电池 碱性二次电池和电池规格中电流值测定指南

This International Standard applies to secondary cells and batteries containing alkaline or other non-acid electrolytes. It proposes a mathematically correct method of current designation which shall be used in future secondary cell and battery standards

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Guide to designation of current in alkaline secondary cell and battery standards

BS EN 62675:2014 蓄电池和含碱或其他非酸性电解质电池组. 密封金属氢化物镍电池圆柱形可充电单电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride prismatic rechargeable single cells

EN 62675:2014 含碱性或其他非酸性电解质的二次电池和电池组 密封镍金属氢化物棱柱形可充电单电池

IEC 62675:2014 specifies marking, designation, dimensions, tests and requirements for sealed nickel-metal hydride prismatic secondary single cells.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride prismatic rechargeable single cells

CAN/CSA-E61959-2014 含碱性或其他非酸性电解质的二次电池和电池组 密封便携式二次电池和电池组的机械测试（第一版）

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries (First Edition)

DB37/T 2393-2013 二次锂离子电池电解液

本标准适用于以六氟磷酸锂为主要电解质加工而成的不同溶剂体系的二次锂离子电池电解液。

Secondary lithium ion battery electrolyte

GSO IEC 61960:2013 含有碱性或非酸性电解质的二次电池和电池组 便携式锂二次电池和电池组

IEC 61960:2011 specifies performance tests, designations, markings, dimensions and other requirements for secondary lithium single cells and batteries for portable applications. The objective of this standard is to provide the purchasers and users of secondary lithium cells and batteries with a set of criteria with which they can judge the performance of secondary lithium cells and batteries offered by various manufacturers. This second edition cancels and replaces the first edition published in 2003. It is a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - 7.6 Endurance in cycles: addition of an accelerated test procedure.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications

BS CWA 50611:2013 流体电池.安装和运转规范导则

Flow batteries. Guidance on the specification, installation and operation

JIS C 8711:2013 包括碱性或其他非酸性电解液的二次电池和蓄电池.便携设备用二次锂电池和蓄电池

This Standard specifies secondary lithium single cells and batteries for portable applications (hereafter referred to as “secondary lithium cells and batteries”).

Secondary cells and batteries containing alkaline or other non-acid electrolytes -- Secondary lithium cells and batteries for portable applications

JIS C 8715-1:2012 工业用二次锂电池和蓄电池.第1部分:性能要求和试验

This Japanese Industrial Standard specifies the requirements of performance (including safety) and marking for cells and battery systems of secondary lithium cells and batteries (hereafter referred to as "cells" and "battery systems", respectively) for use in industrial applications (hereafter simply referred to as "batteries").

Secondary lithium cells and batteries for use in industrial applications .Part 1: Tests and requirements of performance

JIS C 8715-2:2012 工业用二次锂电池和蓄电池.第2部分:安全性要求和试验

Secondary lithium cells and batteries for use in industrial applications -- Part 2: Tests and requirements of safety

LST EN 61960-2011 含有碱性或其他非酸性电解质的二次电池和电池 便携式应用的二次锂电池和电池（IEC 61960:2011）

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications (IEC 61960:2011)

DB11/Z 800-2011 电动汽车电能供给与保障技术规范 商用车动力蓄电池包

本指导性技术文件规定了纯电动商用车和插电式电动商用车动力蓄电池包的要求、试验方法、标识与标志、包装、运输与储存的要求。本指导性技术文件适用于纯电动商用车和插电式电动商用车动力蓄电池包的设计、生产、检验以及包装、运输与储存。

Electric vehicle electric energy supply and guarantee technical specification commercial vehicle traction battery pack

YD/T 2061-2009 通信机房用恒温恒湿空调系统

本标准规定了通信机房用恒温恒湿空调系统的基本参数、技术要求、设计与应用、试验方法、检验规则、标志、包装、运输和贮存等要求。 本标准适用于通信用计算机房、交换机房、数据机房、传输机房、电源机房及其他对设备运行环境温度、湿度、洁净度有较高要求的通信生产机房用空调系统。其他通信辅助机房空调可参照使用。

Constant temperature & humidity air conditioning system for telecommunication room