29.280 电力牵引设备 标准查询与下载

EN 50641:2020 铁路应用 固定装置 用于电力牵引供电系统设计的仿真工具验证要求

This document specifies requirements for the acceptance of simulation tools used for the assessment of design of electric traction power supply systems with respect to TSI Energy. This document is applicable to the simulation of AC and DC electric traction power supply systems, in the frame of assessment required by Directive (EU) 2016/797. The methods and parameters defined in this document are only intended for use in the design of the electric traction power supply system, and hence this document solely considers validation of tools within the TSI energy subsystem for all envisaged railway networks. This document does not deal with validation of simulation tools by measurement. This document focuses on the core simulation functions comprising the equations and functions which calculate the mechanical movement of trains and also which calculate the load flow of the electrical traction power supply system. In doing so this document provides all requirements necessary to demonstrate that a simulation tool may be used for the purposes of TSI approval of electric traction power supply systems. Any simulation tool which meets the acceptance requirements of the test cases in this document can be used to determine TSI compatibility for all systems of the same voltage and frequency without any requirement for further validation as part of the TSI assessment process. This document includes controls for the modification of simulation tools, in particular the limits of applicability of certification when tools are modified. These controls focus on determining whether the core functions of the simulation model are modified. This document provides only the requirements for demonstration of the algorithms and calculations of core functions. The use of a certified simulation tool in accordance with this document does not, in itself, demonstrate good practice in electric traction power supply system design, neither does it guarantee that the simulation models and data for infrastructure or trains used in the tool are correct for a given application. The choice and application of any models and data, of individual system components, in a design is therefore subject to additional verification processes and not in the Scope of this document. Competent development of design models and full understanding of the limits of design tools remain requirements in any system design. This document does not reduce any element of the need for competent designers to lead the design process. The test cases and data shown in Clause 6 in this document do not represent an existing network, but these data are used as theoretical/virtual network only for the purpose of verification of the core functionality. NOTE A new test case will be drafted considering metro, tramways and trolleybuses using DC 600 V or DC 750 V. Until this test case is available, this document can also be applied to subway, tram and trolley bus systems. This test case will also integrate rail systems using DC 750 V. Additionally, the application of this document ensures that the output data of different simulation tools are consistent when they are using the same set of input data listed in Clause 6. This document only applies to the simulation of electric traction power supply systems characteristics at their nominal frequency for AC or DC systems. It does not consider harmonic studies, electrical safety studies (e.g. rail potential), short circuit or electromagnetic compatibility studies over a wide frequency spectrum. This document does not mandate the use of a particular simulation tool in order to validate the design of an electric traction power supply system. This document does not consider complex models with active components such as static frequency convertors.

Railway applications - Fixed installations - Requirements for the validation of simulation tools used for the design of electric traction power supply systems

TB/T 3555-2020 机车车辆电气屏柜 高压电器箱

Rolling stock electrical panel cabinet high voltage electrical box

T/CASAS 008-2019 地铁再生制动能量回收系统技术规范

本规范规定了地铁再生制动能量回收系统（以下简称：MERS）、以蓄电池作为能量回收装置的设计、制造、试验及验收的技术标准和要求，MERS的设计、制造、验收应参照本规范执行。 本规范适用于地铁再生制动能量回收系统中利用电池作为电能存储介质的系统。

Technical Specification for Metro Regenerative Braking Energy Recovery System

TB/T 3551-2019 高速铁路牵引供电系统雷电防护技术导则

Technical guidelines for lightning protection of high-speed railway traction power supply systems

TB/T 2325.2-2019 机车车辆视听警示装置 第2部分：辅助照明灯和标志灯

Audio and visual warning devices for rolling stock - Part 2: Auxiliary lighting and marking lights

T/ZZB 1037-2019 电气化铁路用高强度铜镁合金承力索

本标准规定了电气化铁道用圆线同心层绞高强度铜镁合金承力索的术语和定义、产品分类、基本要求、技术要求、试验方法、检验规则、包装、标志、运输和贮存及质量承诺。 本标准适用于电气化铁路接触网悬挂用的铜镁合金（JTMM类）承力索（以下简称承力索）。

High strength copper-magnesium alloy stranded conductors for electric railway

KS C IEC 60322:2019 铁路应用 - 车辆电气设备 - 开放式施工功率电阻器规则

Railway applications — Electric equipment for rolling stock — Rules for power resistors of open construction

KS C IEC 60638-2019 旋转电机的跟踪评估和编码标准

Criteria for assessing and coding of the commutation of rotating electrical machines for traction

KS C IEC 60322-2019 铁路应用 - 车辆电气设备 - 开放式施工功率电阻器规则

Railway applications — Electric equipment for rolling stock — Rules for power resistors of open construction

KS C IEC 60638:2019 旋转电机的跟踪评估和编码标准

Criteria for assessing and coding of the commutation of rotating electrical machines for traction

KS C IEC 60077-3:2019 铁路应用 - 车辆电气设备 - 第3部分:电工组件 - 断路器

Railway applications — Electric equipment for rolling stock — Part 3: Electrotechnical components — Rules for d.c. circuit-breakers

KS C IEC 60077-3-2019 铁路应用 - 车辆电气设备 - 第3部分:电工组件 - 断路器

Railway applications — Electric equipment for rolling stock — Part 3: Electrotechnical components — Rules for d.c. circuit-breakers

DB43/T 1575-2019 胶轮有轨电车（导轨式）交通系统设计规范

Specifications for design of rubber tire tram (guide rail) transportation system

DB43/T 1576-2019 胶轮有轨电车（导轨式）交通系统施工及验收规范

Specifications for construction and acceptance of rubber tire tram (guide rail) transportation system

TB/T 3526-2018 机车车辆电气设备 接触器

Contactors for rolling stock electrical equipment

TB/T 3527-2018 机车车辆电气设备 低压控制开关

Low voltage control switch for rolling stock electrical equipment

TB/T 2760.3-2018 机车车辆转速传感器 第3部分：磁电式速度传感器

Rolling stock speed sensors Part 3: Magnetoelectric speed sensors

TB/T 3199.1-2018 电气化铁路接触网用绝缘子 第1部分：棒形瓷绝缘子

Insulators for electrified railway contact networks Part 1: Rod-shaped porcelain insulators

TB/T 3199.2-2018 电气化铁路接触网用绝缘子 第2部分：棒形复合绝缘子

Insulators for electrified railway contact networks Part 2: Rod composite insulators

TB/T 3512-2018 电动车组网络控制系统软件集成测试规范

Electric vehicle unit network control system software integration test specifications