31.020 电子元器件综合 标准查询与下载

KS C IEC 60286-5-2003(2008) 包装用于自动处理组件的第五部分:矩阵托盘

Packaging of components for automatic handling－Part 5：Matrix trays

KS C IEC 60286-1-2003(2008) 包装部分1份用于自动处理:在一个连续带包装引线部的带相反的方向上

Packaging of components for automatic handling－Part 1：Tape packaging of components with axial leads on continuous tapes

KS C IEC 60286-6-2003(2008) 包装用于自动处理部件的第六部分:表面安装部件的散装包装盒

Packaging of components for automatic handling－Part 6：Bulk case packaging for surface mounting components

DIN EN 300253:2003 环境工程.电信中心接地和低电阻连接布置

This European Standard (telecommunications series) specifies the earthing and bonding configuration of equipment inside telecommunication centres and similar installations in relation to safety, functional performance and electromagnetic compatibility, based on relevant ITU-T recommendations.

Environmental Engineering (EE) - Earthing and bonding configuration inside telecommunications centres (Endorsement of the English version EN 300253 V 2.1.1 (2002-04) as German Standard)

IEC 61192-2:2003 钎焊电子组件的工艺要求.第2部分:表面安装组件

Specifies requirements for workmanship in soldered surface-mounted electronic assemblies and multichip modules on organic substrates, on printed boards, and on similar laminates attached to the surface(s) of inorganic substrates. Applies to assemblies th

Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mounted assemblies

QC 001002-4-2003 电子元器件IEC质量评定体系.航空电子设备评定程序要求

IEC Quality Assessment System for Electronic Components (IECQ) - Avionics assessment program requirements

DIN IEC 60319:2003 电子元器件可靠性数据的表示和规范 (IEC 60319:1999)

The document provides gives guidance for the collection and presentation of data necessary to understand the reliability characteristics of a component. It also gives guidance to component users as to how they should specify their reliability requirements to component manufacturers. It makes no distinction between data on failures or operation without failures or faults.

Presentation and specification of reliability data for electronic components (IEC 60319:1999)

SNI 04-6972-2003 电子元器件可靠性数据的规范和提供

Presentation and specification of reliability data for electronic components

CEA-2007-2003 QoS优先组802.1Q

The purpose of this specification is to allow three Quality of Service (QoS) models to coexist concurrently on Ethernet based networks that use Internet protocols (IP) and the IEEE 802.1Q priority.

QoS Priority Groupings for 802.1Q

CEA-CEB12-A-2003 PSIP的推荐实践

This bulletin, CEA-CEB12-A, provides guidance for the development and implementation of Advanced Television Systems Committee (ATSC) Program and System Information Protocol (PSIP)-compliant receivers, cable-ready DTV receivers, personal recorders and other consumer electronics devices. It includes recommendations and suggestions for device functionality. CEA-CEB12-A should in no way prohibit consumer device manufacturers from including additional features, and CEA-CEB12-A should not be interpreted as recommending an upper limit to device performance.

PSIP Recommended Practice

ANSI/VITA 38-2003 VME的系统管理

This standard describes a methodology for using IPMI for System Management of VME systems.

System Management for VME

ANSI/EIA 632:2003 系统工程设计方法

(SP-5022) Intended to enable an enterprise to strengthen its competitiveness in global markets by engineering and producing quality systems, and by delivering it products on time at an affordable price or cost. The focus, therefore, is on conceptualizing, creating, and realizing a system and the products that make up a system.

Processes for Engineering a System

ANSI/EIA 481-C:2003 自动装配用表面安装元件的8mm至200mm压纹载体带式封装以及8mm和12mm穿孔载体带式封装

Covers requirements for taping surface mount components

8 mm through 200 mm Embossed Carrier Taping and 8 mm &12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling

KS C 7201-2002 运算放大器的测量方法

MEASURING METHODS FOR OPERATIONAL AMPLIFIERS

LST EN 61360-2-2002 标准数据元素类型和相关的电气元件分类方案 第2部分：EXPRESS 字典模式（IEC 61360 2:2002）

Standard data element types with associated classification scheme for electric components. Part 2: EXPRESS dictionary schema (IEC 61360- 2:2002)

QC 001004-2002 电子元器件IEC质量评定体系(IECQ).规范表

IEC Quality Assessment System for Electronic Components (IECQ) - Specifications list

SJ 20828-2002 合格鉴定用测试图形和布设总图

Testing chart for qualified identifying

QC 001001-2002 IEC 电子元器件质量评估体系（IECQ） 基本规则

IEC Quality Assessment System for Electronic Components (IECQ) - Basic Rules

QC 001002-3 AMD 1-2002 电子元器件IEC质量评定体系的程序规则.第3部分:验收程序.修改件1:监督检查人员职责的认可和鉴定

Rules of procedure of the IEC Quality Assessment System for Electronic Components (IECQ) - Part 3: Approval procedures; Amendment 1 concerning approval and accreditation of a supervising inspectorate

IEEE 1413.1-2002 基于IEEE 1413的可靠性预测的选择和使用指南

Focuses on hardware reliability prediction methodologies for electronic systems and equipment, and specifically excludes software reliability, availability and maintainability, human reliability, and proprietary reliability prediction data and methodologies.

Guide for Selecting and Using Reliability Predictions Based on IEEE 1413