31.040.10 固定电阻器 标准查询与下载

KS C 5117-2003(2018) 孤立状碳膜固定电阻器

Insulated carbon film fixed resistor

KS C 5116-2003(2018) 电子设备碳混合物电阻器使用

Carbon mixture fixed resistor for electronic devices

KS C 5116-2003 电子仪器的固定碳合成电阻器

이 규격은 KS C 5115-1에 따라 주로 전자 기기에 사용하는 고정체 저항기(이하

Fixed carbon composition resistors for use in electronic equipment

KS C 5116-2003(2023) 电磁用碳混合体固定阻尼器

Carbon mixture fixed resistor for electronic devices

KS C 5117-2003(2023) 绝缘型碳膜固定阻尼器

Insulated carbon film fixed resistor

SJ 51432/7-2002 RMK1005型有可靠性指标的片式膜.固定电阻器详细规范

Resistors,fixed,film,chip,established reliability,style RMK1005,detail specification for

BS EN 140401-802:2002 详细规范.低功率非线绕表面安装的固定电阻器.矩形.1和2级别的稳定性

Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors —Rectangular —Stability classes 1; 2 1 Characteristics and ratings 1.1 Dimensions and Ratings 1.2 Derating curve 1.3 Resistance range and tolerance on rated resistance 1.4 Variation of resistance with temperature and temperature rise 1.5 Climatic categories 1.6 Limits for change of resistance at tests 1.7 Non-linear properties 1.8 Marking, packaging and ordering designation 1.8.1 Component 1.8.2 Package 1.8.3 Packaging / Taping 1.8.4 Ordering information 1.9 Additional information (not for inspection purpose) 1.9.1 Storage 1.9.2 Mounting 1.9.3 Soldering process 1.9.4 Conductive glueing 1.9.5 Use of cleaning solvents 1.9.6 Pulse load capability 1.9.7 Variation of resistance value (drift) for lifetimes up to 200 000 h 1.9.8 Dissipation notes 1.9.9 Current noise 2 Quality assessment procedures 2.1 General 2.1.1 Zero defect approach 2.1.2 100%-Test 2.1.3 0Ω-Resistor 2.1.4 Certificate of Conformity (CoC) 2.1.5 Certified test records 2.1.6 Failure rate level (only version E) 2.2 Qualification Approval 2.2.1 Version A 2.2.2 Version E 2.3 Quality conformance inspection 2.3.1 Qualification approval according to EN 100114-2 2.3.2 Technology approval according to EN 100114-6 2.3.3 Non-conforming items Annex A (normative) Fixed sample size Qualification Approval and Quality Conformance Inspection test schedule for fixed low power surface mount (SMD) resistors Annex B (informative) Letter symbols Annex C (normative) Standards referred to in this specification

Detail Specification: Fixed low power non wire-wound surface mount(SMD) resistors - Rectangular - Stability classes 1; 2

BS EN 140401-801:2002 详细规范.低功率非线绕表面安装电阻器.矩形. 0.1、0.25、0.5和1级别的稳定性

Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors —Rectangular —Stability classes 0,1; 0,25; 0,5; 1 1 Characteristics and ratings 1.1 Dimensions and Ratings 1.2 Derating curve 1.3 Resistance range and tolerance on rated resistance 1.4 Variation of resistance with temperature and temperature rise 1.5 Climatic categories 1.6 Limits for change of resistance at tests 1.7 Non-linear properties 1.8 Marking, packaging and ordering designation 1.8.1 Component 1.8.2 Package 1.8.3 Packaging / Taping 1.8.4 Ordering information 1.9 Additional information (not for inspection pin-pose) 1.9.1 Storage 1.9.2 Mounting 1.9.3 Soldering process 1.9.4 Conductive glueing 1.9.5 Use of cleaning solvents 1.9.6 Pulse load capability 1.9.7 Variation of resistance value (drift) for lifetimes up to 200 000 h 1.9.8 Dissipation notes 1.9.9 Current noise 1.9.10 Temperature range extension 2 Quality assessment procedures 2.1 General 2.1.1 Zero defect approach 2.1.2 100%-Test 2.1.3 0Ω-Resistor 2.1.4 Certificate of Conformity (CoC) 2.1.5 Certified test records 2.1.6 Failure rate level (only version E) 2.2 Qualification Approval 2.2.1 Version A 2.2.2 Version E 2.3 Quality conformance inspection 2.3.1 Qualification approval according to EN 100114-2 2.3.2 Technology approval according to EN 100114-6 2.3.3 Non-conforming items Annex A (normative) Fixed sample size Qualification Approval and Quality Conformance Inspection test schedule for fixed low power surface mount (SMD) resistors Annex B (informative) Letter symbols and abbreviations Annex C (normative) Standards referred to in this specification

Detail specification - Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5 ; 1

BS EN 140401-803:2002 详细规范.低功率非线绕表面安装的固定电阻器.矩形.0.05、0.1、0.25、0.5、1和2级别的稳定性

Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors —Cylindrical —Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 1 Characteristics and ratings 1.1 Dimensions and Ratings 1.2 Derating curve 1.3 Resistance range and tolerance on rated resistance 1.4 Variation of resistance with temperature and temperature rise 1.5 Climatic categories 1.6 Limits for change of resistance at tests 1.7 Non-linear properties 1.8 Marking, packaging and ordering designation 1.8.1 Component 1.8.2 Package 1.8.3 Packaging / Taping 1.8.4 Ordering information 1.9 Additional information (not for inspection purpose) 1.9.1 Storage 1.9.2 Mounting 1.9.3 Soldering process 1.9.4 Conductive glueing 1.9.5 Use of cleaning solvents 1.9.6 Pulse load capability 1.9.7 Variation of resistance value (drift) for lifetimes up to 200 000 h 1.9.8 Dissipation notes 1.9.9 Current noise 2 Quality assessment procedures 2.1 General 2.1.1 Zero defect approach 2.1.2 100%-Test 2.1.3 0Ω -Resistor 2.1.4 Certificate of Conformity (CoC) 2.1.5 Certified test records 2.1.6 Failure rate level (only version E) 2.2 Qualification Approval 2.2.1 Version A 2.2.2 Version E 2.3 Quality conformance inspection 2.3.1 Qualification approval according to EN 100114-2 2.3.2 Technology approval according to EN 100114-6 2.3.3 Non-conforming items Annex A (normative) Fixed sample size Qualification Approval and Quality Conformance Inspection test schedule for fixed low power surface mounting (SMD) resistors Annex B (informative) Letter symbols and abbreviations Annex C (normative) Standards referred to in this specification

Detail specification - Fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05; 0,1; 0 ,25; 0,5; 1; 2

BS EN 140401:2002 空白详细规格:低功率非线绕表面安装的固定电阻器

Blank Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors Introduction 1 Characteristics and ratings 1.1 Dimensions and ratings 1.2 Derating curve 1.3 Resistance range and tolerance on rated resistance 1.4 Variation of resistance with temperature and temperature rise 1.5 Climatic categories 1.6 Limits for change of resistance at tests 1.7 Non-linear properties 1.8 Marking, packaging and ordering designation 1.8.1 Component 1.8.2 Package 1.8.3 Packaging / Taping 1.8.4 Ordering information 1.9 Additional information (not for inspection purpose) 1.9.1 Storage 1.9.2 Mounting 1.9.3 Soldering process 1.9.4 Use of cleaning solvents 2 Quality assessment procedures 2.1 General 2.1.1 Zero defect approach 2.1.2 100%-Test 2.1.3 0Ω-Resistor 2.1.4 Certificate of Conformity (CoC) 2.1.5 Certified test records 2.1.6 Failure rate level (only version E) 2.2 Qualification Approval 2.2.1 Version A 2.2.2 Version E 2.3 Quality conformance inspection 2.3.1 Qualification approval according to EN 100114-2 2.3.2 Technology approval according to EN 100114-6 2.3.3 Non-conforming items Annex A (normative) Fixed sample size Qualification Approval and Quality Conformance Inspection test schedule for fixed low power surface mounting (SMD) resistors Annex B (informative) Letter symbols and abbreviations Annex C (normative) Standards referred to in this specification

Blank detail specification - Fixed low power non wire-wound surface mount (SMD) resistors

LST EN 140200-2001/A1-2002 分项规范 固定功率电阻

Sectional specification. Fixed power resistors

DS/EN 140200/A1:2002 分规范：固定功率电阻器

This sectional specification prescribes the preferred values for characteristics and ratings and also the inspection requirements for fixed surface mounting resistors of assessed quality having a rated dissipation up to 1 000 W. It selects from the generic specification, EN 140000, the appropriate methods of test to be used in detail specifications derived from this specification.

Sectional Specification: Fixed power resistors

BS EN 60115-1+A1:2002 电子设备用固定电阻器 总规范

Fixed resistors for use in electronic equipment. Generic specification

BS EN 60115-1:2001+A1:2001 电子设备用固定电阻器.总规范

This part of IEC 60115 is applicable to fixed resistors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

Fixed resistors for use in electronic equipment Part 1: Generic specification

KS C 6419-2002 线绕固定电力电阻器

이 규격은 KS C 5111에 근거하여 주로 전자 기기에 사용하는 전력형 고정 권선 저항기

Fixed wire wound resistors-Power type

KS C 6419-2002(2020) 固定线绕电阻功耗型

Fixed wire wound resistors－Power type

DIN EN 140200:2002 分规范.大功率固定电阻器

The document prescribes the preferred values for characteristics and ratings and also the inspection requirements for fixed power resistors of assessed quality having a rated dissipation of up to 1000 W.

Sectional specification: Fixed power resistors; German version EN 140200:1996 + A1:2001

SNI 04-6716.1-2002 用于电子设备的固定电阻. 第1部分:一般规格

Fixed resistors for use in electronic equipment - Part 1: Generic specification

SJ 54154/1-2001 RXG12型散热器安装功率线绕固定电阻器详细规范

Resistors,fixed,wire-wound,power,chassis mounted,style RXG12,detail specification for

SJ 51432/6-2001 RMK5025型有可靠性指标的片式膜固定电阻器详细规范

本规范适用于RMK5025型有可靠性指标的片式膜固定电阻器。该电阻器包括特性E、H、K和 M，以及除P型引出端外的所有引出端。

Resistors,fixed,file,chip,established reliability,style RMK5025,detail specification for