31.040.10 固定电阻器 标准查询与下载

KS C 5115-42-2001(2011) 电子设备用固定电阻器第4部分:空白详细规范:功率固定电阻器评定水平F

Fixed resistors for use in electronic equipment－Part 4：Blank detail specification：Fixed power resistors Assessment level F

IEC 60115-1:2001 电子设备用固定电阻器.第1部分:总规范

This part of IEC 60115 is applicable to fixed resistors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

Fixed resistors for use in electronic equipment - Part 1: Generic specification

IEC 60115-1/AMD1:2001 电子设备用固定电阻器 第1部分:总规范 修改1

This is Amendment 1 to IEC 60115-1-1999 (Fixed resistors for use in electronic equipment - Part 1: Generic specification)

Fixed resistors for use in electronic equipment - Part 1: Generic specification; Amendment 1

CNS 12287-2000 可靠度保证固定电阻器总则

本标准适用于电子机器用之可靠度保证固定电阻器 (以下简称电阻器 ) 总则。

General rules for reliability assured fixed resistors

SJ 51432/5-2000 RMK1206型有可靠性指标的片式膜固定电阻器详细规范

Resistors,fixed,film,chip,established reliability,style RMK1206,detail specification for

SJ 51432/2-2000 RMK6332型有可靠性指标的片式膜固定电阻器详细规范

Resistors,fixed,film,chip,established reliability,style RMK6332,detail specification for

SJ 51929/10-2000 RJ57型高稳定金属膜固定电阻器详细规范

Resistors,fixed,metal film,high stability,style RJ57,detail specification for

SJ 51432/4-2000 RMK2012型有可靠性指标的片式膜固定电阻器详细规范

Resistors,fixed,film,chip,established reliability,style RMK2012,detail specification for

SJ 51929/11-2000 RJ58型高稳定金属膜固定电阻器详细规范

Resistors,fixed,metal film,high stability,style RJ58,detail specification for

DS/EN 60938-2-1:2000 电磁干扰抑制用固定电感器 第 2-1 部分：空白详细规范 需要进行安全测试的电感器 评定等级 D

A blank detail specification is a supplementary document to the Sectional specification and contains requirments for style, layout and minimum content of detail specification.Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications the content of 1.4 of the sectional specification shall be taken into account.

Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D.

DS/EN 60938-1:2000 电磁干扰抑制用固定电感器 第1部分：通用规范

This standard applies to inductors designed for electomagnetic interference suppression intended for use within, or associated with, electronic or electrical equipment and machines. It is restricted to inductors, for which electrical shock hazard protection tests are appropriate. The combination of two or more inductors within one enclosure is also included. Inductors within the scope of this standard may also be used to protect apparatus and machines from electrical noise and voltage or current transients coming from either the supply or from other parts of the apparatus. The standard does not necessarily apply in its entirety to inductors intended for use

Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification

DS/EN 60938-2-2:2000 电磁干扰抑制用固定电感器 第 2-2 部分：空白详细规范 需要进行安全测试的电感器（仅）

This blank detail specification forms the basis for a uniform procedure for a common mark. It implements the approval schedule for electric shock hazard protection only in IEC 60938-2, requires a declaration of design for parameters relevant to electrical shock hazard protection and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes of the design.

Fixed inductors for electromagnetic interference suppression - Part 2-2: Blank detail specification - Inductors for which safety tests are required (only)

IEC 60115-8/AMD1:2000 电子设备用固定电阻器 第8部分:分规范:片式固定电阻器 修改1

This is Amendment 1 to IEC 60115-8-1989 (Fixed resistors for use in electronic equipment - Part 8: Sectional specification: Fixed chip resistors)

Fixed resistors for use in electronic equipment - Part 8: Sectional specification: Fixed chip resistors; Amendment 1

DS/EN 60938-2:2000 电磁干扰抑制用固定电感器 第2部分：分规范

This standard applies to fixed inductors designed for electromagnetic interference suppression and which fall within the scope of the Generic specification, IEC 60938-1. It is restricted to fixed inductors for which electrical shock hazard protection tests are appropriate. This implies that inductors specified according to this specification will either be connected to mains supplies, when compliance with the mandatory tests of table 1 is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety tests are required.

Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification

NF C82-242:2000 空白详细规范:小功率缠绕的表面安装(SMD)的固定电阻器

Blank Detail Specification : fixed low power wire wound surface mounting (SMD) resistors.

SJ 51432/1-1999 RMK3216型有可靠性指标的片式膜固定电阻器详细规范

Resistors,fixed,film,chip,established reliability,style RMK3216,detail specification for

DS/EN 140402:1999 空白详细规范：固定低功率线绕表面贴装（SMD）电阻器

The document is a supplementary document of the Sectional Specifications and contains requirements for style and layout and minimum content of detail specifications.

Blank Detail Specification: Fixed low power wire wound surface mounting (SMD) resistors

TIS 1526-1998 电子设备用固定电阻器.第4部分:详细规范.轴向引线的线绕功率型固定电阻器.稳定度等级1%.评定水平E

Fixed resistors for use in electronic equipment.part 4: detail specification: fixed power wirewound resistors with solderable axial wire leads.stability class 1%.assessment level e

TIS 1528-1998 电子设备用固定电阻器.第5部分:详细规范.详细规范:轴向引线的线绕精密固定电阻器.稳定度等级0.1%.评定水平E

Fixed resistors for use in electronic equipment.part 5: detail specification: fixed precision wirewound resistors with solderable axial wire leads.stability class 0.1%.assessment level e

TIS 1527-1998 电子设备用固定电阻器.第5部分:分规范.精密固定电阻器

Fixed resistors for use in electronic equipment.part 5: sectional specification: fixed precision resistors