31.060.40 钽电解电容器 标准查询与下载

KS C IEC 60384-31-2008 电子设备用固定电容器第3部分:空白详细规范:钽片式固定电容器评定水平E

Fixed capacitors for use in electronic equipment－Part 3：Blank detail specification：Fixed tantalum chip capacitors－Assessment level E

KS C IEC 60384-15-1-2008 电子设备用固定电容器第15部分:空白详细规范非固体电解质箔电极钽固定电容器评定水平E

Fixed capacitors for use in electronic equipment－Part 15：Blank detail specification－Fixed tantalum capacitors with non-solid electrolyte and foil electrode－Assessment level E

KS C IEC 60384-15-3-2008 电子设备用固定电容器第15部分:空白详细规范固体电解质多孔阳极钽固定电容器评定水平E

Fixed capacitors for use in electronic equipment－Part 15：Blank detail specification－Fixed tantalum capacitors with solid electrolyte and porous anode－Assessment level E

KS C IEC 60384-15-2-2008 电子设备用固定电容器第15部分:空白详细规范:非固体电解质多孔阳极钽固定电容器评定水平E

Fixed capacitors for use in electronic equipment－Part 15：Blank detail specification：Fixed tantalum capacitors with non-solid electrolyte and porous anode－Assessment level E

KS C IEC 60384-11-1-2008 电子设备用固定电容器第11部分:空白详细规范:聚对苯二甲酸乙二酯膜介质金属箔直流固定电容器评定水平E

Fixed capacitors for use in electronic equipment－Part 11：Blank detail specification：Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors－Assessment level E

SJ 20989-2008 CA35N型组合式非固体电解质钽电容器详细规范

本规范规定了CA35N型组合式非固体电解质钽电容器（以下简称电容器）的结构、外型尺寸、技术要求和试验方法。 本规范适用于带绝缘层的金属外壳、金属盖板锡焊密封、有极性烧结钽阳极、径向（或轴向）引出、多个螺钉固定的组合式非固体电解质钽电容器。

Capacitors, electrolytic (nonsolid electrolyte), tantalum, combined, high capacitance type CA35N detail specification for

SJ 52283/3-2008 CAK45A型有可靠性指标的片式固体电解质钽电容器详细规范

本规范规定了CAK45A型有可靠性指标的片式固体电解质钽电容器的结构、外形尺寸、技术要求和试验方法。 本规范适用于模压封闭、烧结钽阴极、有极性的CAK45A型有可靠性指标的片式固体电解质钽电容器（以下简称电容器）。

Capacitors, solid electrolytic, tantalum, chip, established reliability, type CAK45A detail specification for

SJ 50733/6-2008 CAK38 型有可靠性指标的气密封非固体电解质全钽电容器详细规范

本规范规定了CAK38型有可靠性指标的非固体电解质钽电容器的结构、外形尺寸、技术要求和试验方法。 本规范适用于钽外壳气密封、烧结钽阳极、有极性的有可靠性指标的非固体电解质全钽电容器。

Capacitors, electrolytic (nonsolid electrolyte), tantalum, established reliability, type CAK38, detail specification for

SJ 52283/2-2008 CAK45L型有可靠性指标的片式固体电解质钽电容器详细规范

本规范规定了CAK45L型有可靠性指标的片式固体电解质钽电容器的结构、外形尺寸、技术要求和试验方法。 本规范适用于模压封装、烧结钽阳级、有极性的CAK45L型有可靠性指标的低等效串联电阻片式固体电解质钽电容器（以下简称电容器）。

Capacitors, solid electrolytic, tantalum, chip, established reliability, type CAK45L detail specification for

NF C93-112-3:2008 电子设备的固定电容器.第3部分:分规范:带有二氧化锰固体电解质的表面安装固定式钽电解电容器.

Fixed capacitors for use in electronic equipment - Part 3 : sectional specification : surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte.

BS EN 60384-3-1:2006 电子设备用固定电容器.第3-1部分:空白详细规范.带二氧化锰固体电解质的表面安装钽电解固定电容器.评估等级EZ

The text of document 40/1772/FDIS, future edition 2 of IEC 60384-3-1, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60384-3-1 on 2006-11-01. The following dates were fixed: ?latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-08-01 ?latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2009-11-01 Annex ZA has been added by CENELEC.

Fixed capacitors for use in electronic equipment - Part 3-1:Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ

DIN EN 60384-3:2007 电子设备用固定电容器.第3部分:分规范:采用二氧化锰固体电解质的表面安装固定的钽电解电容器(IEC 60384-3-2006)

Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte (IEC 60384-3:2006); German version EN 60384-3:2006

DIN EN 60384-3-1:2007 电子设备用固定电容器.第3-1部分:空白详细规范:采用二氧化锰固体电解质的表面安装固定的钽电解电容器.评定等级EZ(IEC 60384-3-1-2006)

Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ (IEC 60384-3-1:2006); German version EN 60384-3-1:

SJ 20973-2007 有可靠性指标的双极性固体电解质.钽电容器通用规范

本规范规定了有可靠性指标的双极性固体电解质钽电容器（以下简称电容器）通用技术要求、质量保证规定以及交货准备等。 本规范适用于有可靠性指标的双极性固体电解质钽电容器。

Capacitors, fixed, double polarized, electrolytic (solid electrolyte), tantalum, established reliability, general specification for

SJ 50063/5-2007 CAK44M型有可靠性指标的固体电解质钽固定电容器详细规范

本规范规定了CAK44M型有可靠性指标的固体电解质钽固定电容器（以下简称电容器）的详细要求。 本规范适用于CAK44M型有可靠性指标的金属外壳气密性密封、烧结阳极、极性带绝缘外套的固体电解质钽电容器。

Capacitors, fixed, electrolytic (solid electrolyte), tantalum type CAK44M, established reliability detail specification for

SJ 50733/5-2007 CAK35X型有可靠性指标的气密封非固体电解质钽固定电容器详细规范

本规范规定了CAK35X型有可靠性指标的气密封非固体电解质钽固定电容器的详细要求。 本规范适用于CAK35X型有可靠性指标的带绝缘外套或不带绝缘外套、银外壳、极性烧结式阳极、绝缘子气密封的非固体电解质钽电容器。

Capacitors, fixed, electrolytic (non-solid electrolyte), tantalum hermetically sealed type CAK35X, established reliability detail specification for

LST EN 60384-3-2007 电子设备用固定电容器 第3部分：分规范：采用二氧化锰固体电解质的表面贴装固定钽电解电容器（IEC 60384-3:2006）

Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte (IEC 60384-3:2006)

DS/EN 60384-3-1:2007 电子设备用固定电容器 第 3-1 部分：空白详细规范：采用二氧化锰固体电解质的表面贴装固定钽电解电容器 评估等级 EZ

A blank detail specification is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described.

Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ

DS/EN 60384-3:2007 电子设备用固定电容器 第3部分：分规范：表面贴装二氧化锰固体电解质固定钽电解电容器

This specification applies to surface mount tantalum solid electrolyte capacitors. Thesecapacitors are primarily intended to be mounted directly onto substrates for hybrid circuits oronto printed boards.The following two styles are considered:– Style 1: protected capacitors;– Style 2: unprotected capacitors.

Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte

DIN EN 60384-24-1:2007 电子设备用固定电容器.第24-1部分:空白详细规范.带传导聚合物固体电解质的表面安装固定钽电解电容器.评定级EZ

A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specification. Detail specification not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described.

Fixed capacitors for use in electronic equipment - Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ (IEC 60384-24-1:2006); German version EN 60384-