31.120 电子显示器件 标准查询与下载

EN 50625-2-2:2015 WEEE 的收集 物流和处理要求 第 2-2 部分：包含 CRT 和平板显示器的 WEEE 的处理要求

Collection@ logistics & Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing CRTs and flat panel displays

SJ/T 11460.6.1-2015 液晶显示用背光组件 第6-1部分:测试方法 光学与光电参数

本部分规定了液晶显示用背光组件(以下简称背光组件)的光学和光电性能的测试方法。本部分适用于各类液晶显示用背光组件,包括半导体发光二极管(LED)、冷阴极荧光灯(CCFL)、电致发光(EL)等背光组件。

Backlight unit for liquid crystal display.Part 6-1: Measuring method of optical and optoelectrical parameters

SJ/T 11460.6.2-2015 液晶显示用背光组件 第6-2部分:测试方法 动态光学与光电参数

本部分规定了液晶显示用背光组件(以下简称“背光组件”)的动态光学与光电性能参数的测量方法。本部分适用于液晶显示用背光组件,包括LED (半导体发光二极管)、CCFL (冷阴极荧光灯管)等背光组件。

Backlight unit for liquid crystal display.Part 6-2: Measuring methods of dynamic optical and optoelectrical parameters

SJ/T 11378.7-2015 等离子体显示器件 第7部分：数字电视机用等离子体显示器件可靠性试验方法

Plasma display devices Part 7: Reliability test methods for plasma display devices for digital televisions

SJ/T 11378.6.1-2015 等离子体显示器件 第6-1部分：数字电视机用彩色等离子体显示器件详细规范

Plasma display devices Part 6-1: Detailed specifications for color plasma display devices for digital television sets

GSO IEC 62341-5-3:2015 有机发光二极管显示器 第5-3部分：图像稳定性和寿命的测量方法

IEC 62341-5-3:2013 specifies the standard measurement conditions and measurement methods for determining the image sticking and lifetime of organic light emitting diode (OLED) display panels and modules. It mainly applies to modules.

Organic light emitting diode (OLED) displays - Part 5-3: Measuring methods of image sticking and lifetime

GSO IEC 61747-10-1:2015 液晶显示设备 第10-1部分：环境、耐久性和机械测试方法

IEC 61747-10-1:2013 lists test methods applicable to liquid crystal display devices. It takes into account, wherever possible, the mechanical robustness test methods as outlined in IEC 60068. The object of this standard is to establish uniform preferred test methods with preferred values for stress levels for judging the mechanical properties of liquid crystal display devices. This first edition of IEC 61747-10-1 cancels and replaces Clauses 1 and 2 of the first edition of IEC 61747-5 published in 1998. This edition constitutes a technical revision.

Liquid crystal display devices - Part 10-1: Environmental, endurance and mechanical test methods - Mechanical

GSO IEC 62629-1-2:2015 3D 显示设备 第1-2部分：概述 术语和文字符号

IEC 62629-1-2:2013 provides a list of the terminologies that are frequently used in describing 3D display technologies in the IEC 62629 series. Terms for various 3D display technologies on stereoscopic, autostereoscopic, volumetric, and holographic displays are included.

3D display devices - Part 1-2: Generic - Terminology and letter symbols

IEC 61747-3:2015 液晶显示器件 - 第3部分:液晶显示器（LCD）单元 - 分段规格

This part of IEC 61747 applies to liquid crystal cells of the segment type monochrome. It gives details of the quality assessment procedures@ inspection requirements@ screening sequences@ sampling requirements and test and measurement procedures required for the assessment of liquid crystal display cells. Instead of the qualification approval procedure@ the capability approval procedure can be applied for all products manufactured in a defined process.

Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification

GSO IEC 61747-4:2015 液晶显示装置 第4部分：液晶显示模块和单元 基本额定值和特性

IEC 61747-4:2012 describes the essential ratings and characteristics of LCD cells and passive matrix monochrome liquid crystal display modules. It does not apply to active matrix LCD cells nor to multicolour cells. This edition includes the following significant technical changes with respect to the previous edition: - 2.1 and 3.1 of IEC 61747-4:1998 were deleted because these items are defined in IEC 61747-1; - 2.7.6, in 2.7, Supplementary information, of IEC 61747-4:1998 was deleted because the scope of this standard is about passive matrix monochrome liquid crystal display modules; - The item "Gray scale: digital or analog" in 2.3.1 of IEC 61747-4:1998 was changed to "Gray scale: number" because it is more accurate; - Contrast mode: light symbol on dark background ("LOD" or "positive image") or dark symbol on light background ("DOL" or "negative image") was introduced in this part of IEC 61747 to replace the description in 2.3.1 and 3.3.1 of IEC 61747-4:1998. This publication is to be read in conjunction with IEC 61747-1:1998.

Liquid crystal display devices - Part 4: Liquid crystal display modules and cells - Essential ratings and characteristics

GSO IEC 62629-22-1:2015 3D 显示设备 第22-1部分：自动立体显示器的测量方法 光学

IEC 62629-22-1:2013 specifies optical measuring methods for autostereoscopic display devices. It defines general measuring procedures for optical characteristics of two-view and multi-view displays and integral imaging displays.

3D display devices - Part 22-1: Measuring methods for autostereoscopic displays - Optical

IEC 61747-2:2015 液晶显示器件.第2部分:液晶显示模块.分规范

This part of IEC 61747 applies to liquid crystal display modules such as the following: ?C static/segment type liquid crystal display modules; ?C passive matrix monochrome liquid crystal display modules; ?C passive matrix colour liquid crystal display modules; ?C active matrix monochrome liquid crystal display modules; ?C active matrix colour liquid crystal display modules. It gives details of the quality assessment procedures@ inspection requirements@ screening sequences@ sampling requirements@ and test and measurement procedures required for the assessment of liquid crystal display modules.

Liquid crystal display devices - Part 2: Liquid crystal display modules - Sectional specification

IEC 61747-3-1:2015 液晶显示器.第3-1部分:液晶显示屏(LCD).空白详细规范规范

This part of IEC 61747 serves as a blank detail specification (BDS) for the IEC quality assessment system and contains requirements for style and layout and minimum content of the detail specifications. These requirements are applicable when the detail specification is published (e.g. for a standard product).

Liquid crystal display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification

IEC 61988-4-1:2015 等离子显示面板 第 4-1 部分：环境测试方法 气候和机械

This part of IEC 61988 defines the following test methods for evaluating the climatic and mechanical endurance characteristics of plasma display modules (PDP modules): a) temperature and humidity tests b) air pressure tests c) mechanical tests

Plasma display panels - Part 4-1: Environmental testing methods - Climatic and mechanical

IEC 61988-2-6:2015 等离子显示面板 第 2-6 部分：测量方法 APL 相关的伽马和颜色特性

This part of IEC 61988 defines the measuring methods for gamma and colour gamut characteristics as a function of the APL for a PDP module (plasma display module). Generally@ the luminance level of a PDP module is dependent on the APL (average picture level) of input images. Varying the input levels causes a change of the chromaticity of RGB primary colours. This standard also defines the measuring methods of tone characteristics and chromaticity characteristics with varying APLs. This standard is based on the assumption that the inversegamma circuit is inside the module

Plasma display panels - Part 2-6: Measuring methods - APL dependent gamma and colour characteristics

IEC 61747-20-2:2015 液晶显示器件第 20-2 部分：外观检查单色矩阵液晶显示模块（不包括所有有源矩阵液晶显示模块）

This part of IEC 61747 gives the details of the quality assessment procedures and provides general rules for the visual inspection of the non-active and active areas of monochrome matrix liquid crystal display modules by the human eye and@ if necessary@ through an optical microscope. Furthermore this standard includes the defect definitions and the method for visual defect inspection. NOTE Restrictions on defect types@ number@ and sizes are specified in the quality contract (customer acceptance specification and incoming inspection specification) between the panel and set makers.

Liquid crystal display devices - Part 20-2: Visual inspection - Monochrome matrix liquid crystal display modules (excluding all active matrix liquid crystal display modules)

BS IEC 61747-40-4:2015 液晶显示装置. 移动设备用显示保护玻璃的机械试验. 双轴弯曲强度 (环对环)

Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Biaxial flexural strength (ring-on-ring)

BS IEC 61747-40-3:2015 液晶显示装置. 移动设备用显示保护玻璃的机械试验. 双轴挠曲能量耗竭 (落球)

Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Biaxial flexural energy to failure (ball drop)

BS IEC 61747-40-2:2015 液晶显示装置. 移动设备用显示保护玻璃的机械试验. 单周挠曲长度 (4点弯曲)

Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Uniaxial flexural strength (4-point bend)

DB44/T 1528.1-2015 裸眼立体显示器 第1部分：光学参数测量方法

本部分规定了裸眼立体显示器光学性能的测量条件和测量方法。 本部分适用于双视点裸眼立体显示器、多视点裸眼立体显示器和集成成像裸眼立体显示器。

Glasses-free stereoscopic displays Part 1: Measurement methods of optical parameters