31.120 电子显示器件 标准查询与下载

DB44/T 1528.1-2015 裸眼立体显示器 第1部分：光学参数测量方法

本部分规定了裸眼立体显示器光学性能的测量条件和测量方法。 本部分适用于双视点裸眼立体显示器、多视点裸眼立体显示器和集成成像裸眼立体显示器。

Glasses-free stereoscopic displays Part 1: Measurement methods of optical parameters

DIN EN 62595-1-1:2015 LED背光组件. 第1-1部分: 总规格 (IEC 62595-1-1-2013); 德文版本EN 62595-1-1-2013

LCD backlight unit - Part 1-1: Generic specification (IEC 62595-1-1:2013); German version EN 62595-1-1:2013

IEC 61747-40-4:2015 液晶显示装置. 第40-4部分: 移动设备用显示保护玻璃的机械试验. 双轴弯曲强度 (环对环)

This part of IEC 61747-40 is a mechanical performance testing procedure for cover glass used in electronic flat panel displays in mobile devices. This standard is focused on the measurement of as-received surface fracture load via biaxial flexure generated by ring-on-ring.

Liquid crystal display devices - Part 40-4: Mechanical testing of display cover glass for mobile devices - Biaxial flexural strength (Ring-on-ring)

IEC 61747-40-3:2015 液晶显示装置. 第40-3部分: 移动设备用显示保护玻璃的机械试验. 双轴挠曲能量耗竭 (落球)

This part of IEC 61747-40 is a mechanical performance testing procedure for cover glass used in electronic flat panel displays in mobile devices. This standard is focused on the measurement of surface impact resistance via biaxial flexure generated by a ball drop.

Liquid crystal display devices - Part 40-3: Mechanical testing of display cover glass for mobile devices - Biaxial flexural energy-to-failure (Ball drop)

IEC 61747-40-2:2015 液晶显示装置. 第40-2部分: 移动设备用显示保护玻璃的机械试验. 单周挠曲长度 (4点弯曲)

This part of IEC 61747-40 is a mechanical performance testing procedure for cover glass used in electronic flat panel displays in mobile devices. This standard is focused on the measurement of as-received edge strength via uni-axial flexure generated by a four-point bend.

Liquid crystal display devices - Part 40-2: Mechanical testing of display cover glass for mobile devices - Uni-axial flexural strength (4-point bend)

GOST R IEC 61988-2-1-2015 等离子体显示板. 第2-1部分. 测量方法. 光学和光电

Plasma display panels. Part 2-1. Measuring methods. Optical and optoelectrical

GOST R IEC 61747-1-1-2015 液晶显示装置. 第1-1部分. 总则. 通用规格

Liquid crystal display devices. Part 1-1. Generic. Generic specification

GOST R IEC 61747-4-2015 液晶显示装置. 第4部分. 液晶显示模块和电池. 基本额定值和特性

Liquid crystal display devices. Part 4. Liquid crystal display modules and cells. Essential rating and characteristics

GOST R IEC 61747-4-1-2015 液晶显示装置. 第4-1部分. 矩阵颜色液晶显示 (LCD) 模块. 基本额定值和特性

Liquid crystal display devices. Part 4-1. Matrix color liquid crystal display (LCD) modules. Essential rating and characteristics

GOST R IEC 61747-2-1-2015 液晶显示装置. 第2-1部分. 无源矩阵单色LCD模块. 空白详细规格

Liquid crystal display devices. Part 2-1. Passive matrix monochrome LCD modules. Blank detail specification

GSO IEC 60151-16:2014 电子管和阀门电性能表 第16部分：电视显像管的测量方法

  Scope is not provided for this standard

Measurements of the electrical properties of electronic tubes and valves - Part 16: Methods of measurement for television picture tubes

GSO IEC 61747-6-3:2014 液晶显示设备 第6-3部分：彩色液晶显示器的测量方法 有源矩阵液晶显示器的运动测量

This part of IEC 61747 applies to transmissive type active matrix liquid crystal displays. This standard defines general procedures for quality assessment related to the motion performance of LCDs. It defines artifacts in the motion contents and methods for motion artifact measurement. NOTE Motion blur measurement methods and analysis methods introduced in this standard could not be universal tools for all different LCD motion enhancement technologies due to its complexity. Users shall be notified of these circumstances

Liquid crystal display devices - Part 6-3: Measuring methods for liquid crystal display modules - Motion artifact measurement of active matrix liquid crystal display modules

GSO IEC 61747-3-1:2014 液晶显示器件 第3-1部分：液晶显示 (LCD) 单元 详细规范正在准备中

Defines assessment procedures in such a manner that electronic components released by one participating country as conforming with the requirements of an applicable specification are equally acceptable in all participating countries without the need for further testing.

Liquid crystal display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification

GSO IEC 61747-3:2014 液晶显示器件 第3部分：LCD 单元 分规范

This sectional specification applies to liquid crystal cells of the segment type monochrome . It gives details of the quality assessment procedures, the inspection requirements, screening sequences, sampling requirements and test and measurement procedures required for the assessment of liquid crystal display cells. Instead of the qualification approval procedure, the capability approval procedure can be applied (see Clause 4 of IECQ 001002-3; however, at present the capability approval procedure for liquid crystal display cells is under consideration) for all products manufactured in a defined process. All the requirements of this specification remain valid, unless modified by the requirements set out in 4.7 of this standard.

Liquid crystal display devices - Part 3: Liquid crystal display (LCD) cells - Sectional specification

GSO IEC 60441:2014 用于测量从阴极射线管屏幕发出的光的光度和色度方法

This recommendation covers photometric and colorimetric methods of measurement of the light emitted by a cathode-ray tube screen, such tubes including monochrome and colour television picture tubes, oscilloscope tubes and other cathode-ray tubes. It should not be regarded as a recommendation in the sense of a standard, because a more detailed description of the measuring methods is needed if measuring results on the basis of these principles have to be comparable within definite tolerances.

Photometric and colorimetric methods of measurement of the light emitted by a cathode-ray tube screen

GSO IEC 60151-14:2014 电子管和阀门的电性能计 第14部分：雷达和阴极射线示波器管的测量方法

The measurements described in this publication are not all appropriate to every type of cathode-ray tube. They should therefore be applied only when specifically stated.

Measurements of the electrical properties of electronic tubes and valves. Part 14: Methods of measurement of radar and oscilloscope cathode-ray tubes

GSO IEC 61747-2-2:2014 液晶显示器件 第2-2部分：彩色矩阵 LCD 显示模块 详细规范正在准备中

This part of IEC 61747 serves as a blank detail specification (BDS) for testing and contains requirements for style and layout and minimum content of detail specifications. These requirements are applicable when the detail specification is published (e.g. for a standard product).

Liquid crystal display devices - Part 2-2: Matrix colour LCD modules - Blank detail specification

GSO IEC 61747-5:2014 固态和液晶显示装置 第5部分：环境、耐久性和机械测试方法

This part of IEC 61747 lists test methods applicable to liquid crystal display devices. It takes into account, wherever possible, the environmental test methods outlined in IEC 60068. It also includes visual inspection for both liquid crystal display cells and modules.

Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods

GSO IEC 61988-4-2:2014 等离子显示面板 第4-2部分：环境测试方法 面板耐久性

IEC 61988-4-2:2012 defines testing methods for evaluating mechanical characteristics of plasma display modules (PDP modules) in the following areas: a) Ball drop breaking strength of panels; b) Partial heating strength of panels.

Plasma display panels - Part 4-2: Environmental testing methods - Panel strength

GSO IEC 61747-5-2:2014 液晶显示装置 第5-2部分：环境、耐久性和机械测试方法 有源矩阵彩色液晶显示模块的物理检查

This part of IEC 61747 gives the details of the quality assessment procedures and provides general rules for visual inspection of the active area of transmissive type active matrix colour liquid crystal display modules by the human eye. Furthermore, this standard includes defect definitions and the method for visual defect inspection. NOTE 1 Mura is excluded from this standard because it was not clearly specified at the time this standard was developed. NOTE 2 Restrictions on defect types, number, and sizes are specified in the quality contract (customer acceptance specification and incoming inspection specification) between panel and set makers.

Liquid crystal display devices - Part 5-2: Environmental, endurance and mechanical test methods - Visual inspection of active matrix colour liquid crystal display modules