31.120 电子显示器件 标准查询与下载

GSO IEC 61988-4-2:2014 等离子显示面板 第4-2部分：环境测试方法 面板耐久性

IEC 61988-4-2:2012 defines testing methods for evaluating mechanical characteristics of plasma display modules (PDP modules) in the following areas: a) Ball drop breaking strength of panels; b) Partial heating strength of panels.

Plasma display panels - Part 4-2: Environmental testing methods - Panel strength

GSO IEC 61747-3-1:2014 液晶显示器件 第3-1部分：液晶显示 (LCD) 单元 详细规范正在准备中

Defines assessment procedures in such a manner that electronic components released by one participating country as conforming with the requirements of an applicable specification are equally acceptable in all participating countries without the need for further testing.

Liquid crystal display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification

IEC 61747-2-2:2014 液晶显示器件.第2-2部分:矩阵彩色LCD模块.空白详细规范

Liquid crystal display devices - Part 2-2: Matrix colour LCD modules - Blank detail specification

SJ/T 11460.3.1-2014 液晶显示用背光组件.第3-1部分:便携式显示用LED背光组件空白详细规范

本部分规定了便携式显示用LED背光件的技术要求、质量评定程序、检验和试验方法、包装、运输和储存的空白详细要求口。本部分适用于便携式先使用LED背光组件(以下简称“组件”)。

Backlight units for liquid crystal displays.Part 3-1: LED backlight unit for portable display.Blank detail specification

SJ/T 11460.2-2014 液晶显示用背光组件.第2部分:CCFL背光组件空白详细规范

本部分规定了CCFL背光组件(以下简称“组件”)的技术要求，以及质量评定程序、检验和试验方法、包装、运输和储存的空白详细要求。本部分适用于冷阴极荧光灯管(CCFL)背光组件。

Backlight units for liquid crystal displays .Part 2: Cold Cathode Fluorescent Lamp (CCFL) backlight units.Blank detail specification

IEC 61747-4-1:2014 液晶显示器件.第4-1部分:矩阵彩色LCD模件.基本额定值和特性

This part of IEC 61747 describes the essential ratings and characteristics of matrix colour liquid crystal display (LCD) modules.

Liquid crystal display devices - Part 4-1: Matrix colour LCD modules - Essential ratings and characteristics

BS IEC 62715-1-1:2013 柔性显示装置. 术语和文字符号

Flexible display devices. Terminology and letter symbols

IEC 61747-10-2:2014 液晶显示装置. 第10-2部分: 环境, 耐受性和机械试验方法. 环境和耐受性

Liquid crystal display devices - Part 10-2: Environmental, endurance and mechanical test methods - Environmental and endurance

GSO IEC/TR 62728:2014 显示技术 液晶显示器、等离子显示器和有机发光二极管显示器 术语差异概述和解释

IEC/TR 62728:2011(E) explains the differences in definitions of the terms used in the flat panel display field such as liquid crystal displays (LCD), plasma displays (PDP), and organic light emitting diode displays (OLED). The definitions of technical terms are individually specified in the different standards: - Liquid crystal display: IEC 61747-1 - Plasma display: IEC 61988-1 - Organic light emitting diode display: IEC 62341-1-2. This report explains the background and reasons for the differences, but does not introduce new definitions or terms.

Display technologies - LCD, PDP and OLED - Overview and explanation of differences in terminology

IEC 61747-1-1:2014 液晶显示装置. 第1-1部分: 通用类. 通用规格

This part of IEC 61747 is a generic specification for liquid crystal display devices. It defines general procedures for testing and gives general rules for the measuring methods of the electrical and optical characteristics@ the rules for climatic and mechanical tests@ and the rules for endurance tests.

Liquid crystal display devices - Part 1-1: Generic - Generic specification

BS IEC 61747-40-1:2013 液晶显示装置. 移动设备用显示保护玻璃的机械试验. 指南

Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Guidelines

DB14/T 1001-2014 连续累计自动衡器（电子皮带秤）称重显示器

本标准规定了连续累计自动衡器（电子皮带秤）称重显示器的术语和定义、要求、试验方法、检验规则及标志、包装、运输和贮存等。 本标准适用于连接以电压形式输出的称重传感器，电压脉冲信号形式输出的速度传感器的称重显示器（以下简称显示器）。

Continuous cumulative automatic weighing instrument (electronic belt scale) weighing display

BS IEC 62715-6-1:2014 柔性显示装置. 机械应力试验方法

Flexible display devices. Mechanical stress test methods

DIN EN 61747-10-1:2014 液晶显示装置. 第10-1部分: 环境, 耐受性和机械试验方法. 机械(IEC 61747-10-1-2013); 德文版本EN 61747-10-1-2013

Liquid crystal display devices - Part 10-1: Environmental, endurance and mechanical test methods - Mechanical (IEC 61747-10-1:2013); German version EN 61747-10-1:2013

LST EN 61747-10-1-2014 液晶显示器件. 第10-1部分: 环境, 电耐久性和机械试验方法. 机械性(IEC 61747-10-1-2013)

Liquid crystal display devices -- Part 10-1: Environmental, endurance and mechanical test methods - Mechanical (IEC 61747-10-1:2013)

DIN EN 61747-2-1:2014 液晶显示器.第2-1部分:无源矩阵单色液晶(LCD)模块.空白详细规范(IEC 61747-2-1-2013).德文版本EN 61747-2-1-2013

Liquid crystal display devices - Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification (IEC 61747-2-1:2013); German version EN 61747-2-1:2013

IEC 62629-12-1:2014 三维显示装置.第12-1部分:使用玻璃的立体显示器用测量方法.光学

3D display devices - Part 12-1: Measuring methods for stereoscopic displays using glasses - Optical

KS C IEC 60441-2013 测量阴极射线管屏幕发出的光的光度和色度方法

Photometric and colorimetric methods of measurement of the light emitted by a cathode-ray tube screen

KS C IEC 60151-16-2013 电子管和电子管电性能的测量第16部分：电视显像管的测量方法

Measurements of the electrical properties of electronic tubes and valves－Part 16：Methods of measurement for television picture tubes

GSO IEC 62595-2:2013 背光模块 (LCD) 第2部分：背光模块 (LED) 的光电测量方法

IEC 62595-2:2012 specifies the standard measurement conditions and measuring methods for determining electrical, optical, and electro-optical parameters of LED backlight units for liquid crystal displays. NOTE: Other backlights (Cold Cathode Fluorescent Lamps (CCFLs), External Electrode Fluorescent Lamps (EEFLs), Hot Cathode Fluorescent Lamps (HCFLs), Carbon Nano Tube (CNT), etc.) are excluded from this standard.

LCD backlight unit - Part 2: Electro-optical measurement methods of LED backlight unit