31.120 电子显示器件 标准查询与下载

IEC 61747-1:1998+AMD1:2003 CSV 液晶和固态显示设备第1部分:总规范

Liquid crystal and solid-state display devices - Part 1: Generic specification

IEC 61747-1:2003 液晶和固态显示器件.第1部分:总规范

Defines general procedures for quality assessment to be used in the IECQ system and gives general rules for measuring methods of electrical and optical characteristics, rules for climatic and mechanical tests, and rules for endurance tests.

Liquid crystal and solid-state display devices - Part 1: Generic specification

KS C IEC 60151-16-2003(2008) 电子管和电子阀电性能的测量第16部分:电视显像管的测量方法

Measurements of the electrical properties of electronic tubes and valves－Part 16：Methods of measurement for television picture tubes

KS C IEC 60441-2003(2008) 测量由阴极射线管屏幕发出的光的光度和比色法

Photometric and colorimetric methods of measurement of the light emitted by a cathode-ray tube screen

SN/T 1176-2003 进出口超扭曲向列相液晶显示器件检验方法

本标准规定了超扭曲向列相液晶显示器件的检验方法。对评价液晶显示器件性能的各项参数的限 定值，本标准不作规定。 本标准适用于进出口超扭曲向列相液晶显示器件的检验。

Methods for the inspection of super-twisted nematic liquid crystal display devices for import and export

SN/T 1175-2003 进出口薄膜晶体管彩色液晶显示器检验方法

Methods for the inspection of thin film transistor color liquid crystal display devices for import and export

BS EN 61988-2-1:2003 等离子体显示板 测量方法 光学

Plasma display panels. Measuring methods. Optical

BS EN 61988-2-1:2002 等离子体显示板.测量方法.光学

This part of IEC 61988 determines the measuring methods for characterizing the performance of colour plasma display modules in the following areas: a) 4 % window luminance; b) luminance uniformity; c) dark-room contrast ratio; d) white chromaticity and chromatic uniformity; e) colour gamut in the centre box.

Plasma display panels - Measuring methods - Optical

IEC 61988-2-2:2003 等离子体显示板.第2-2部分:光电测量方法

This part of IEC 61988 determines the following measuring methods for characterising the performance of colour plasma display modules: a) bright-room contrast ratio; b) module power and current consumption; c) module luminous efficacy.

Plasma display panels - Part 2-2: Measuring methods; Optoelectrical

ARINC 735A-1 ITEM 6.0-2003 VSI/TCAS显示器

VSI/TCAS Display

VSI/TCAS Display

UL 2305 BULLETINS-2003

Requirements cover exhibition display units that are intended for indoor use for illuminating, animating, activating, or displaying in temporary exhibits, show conventions, meetings, or assemblies, intended for temporary construction and display at exposition events. Electrical components and systems shall be used in accordance with the National Electrical Code, NFPA 70 and with the installation requirements of this standard. These requirements also cover portable tradeshow displays, hanging components, convention center cord sets, and other exhibit assemblies

2/17/2003 (12p)

CEA-2002-2002 电源线载波技术用试验程序.最佳可利用副本

The objective of this Test Procedure is to establish a set of tests and analysis that will validate key aspects of Powerline Carrier Technology (PLT) for use in Home Networking products. Specifically, tests and analysis will be conducted to evaluate the following: a) outlet coverage - using a minimum of 30 outlet pairs per test site, one pair at a time. b) application performance - using a minimum of 3 typical scenarios c) network coexistence performance - with networks operating simultaneously in neighboring residences d) performance over a range of network sizes - using node populations of 3, 5, 10, 14 in the field e) performance across a range of dwelling types and geographic areas - using a minimum of 30 homes, from a variety of geographic locations, building types, construction, and wiring methods. There are three components to the tests: a) First, the initial pre-field lab verification tests of §8.1 to ensure that the technology can successfully complete the suite of field tests described below b) Second, the actual home testing (field tests) of §7 c) Third, the post-field lab tests of §8.2 - §8.8 for those aspects of the technology that can be more easily exercised in a lab Field testing in the actual homes also consists of initial preparatory activities in each home: a) home inventory (sketch home layout, select and number outlets, note special home characteristics, etc.) b) equipment set up and check out Home profiling measurements (powerline characterization) may be taken either before or after the testing is complete in a given home, but home profiling is separate from these Test Procedures. The Powerline Carrier Network (PLN) set will be pre-configured for 14 nodes using 14 dedicated personal computers (PC’s). Once configured, the PC/PLN set will move from home to home.

Test Procedure for Powerline Carrier Technology -Best Available Copy

SJ 20847-2002 宽温度范围液晶材料规范

Specification for broad temperature range liquid crystal mixtures

SJ 52146/2-2002 GS1113K型低功耗数码显示器详细规范

Detail specification for low power dissipation numerical display for type GS1113K

SJ/T 11272-2002 车载彩色显示器通用规范

本规范规定了车载视听系统中彩色显示器的要求、试验方法、质量评定程序、标志、包装、运输、贮存等。 本规范适用于车载视听系统中彩色显示器。

General specification for vehicle colour monitor

KS C 7100-2002 液晶显示面板的一般规则

GENERAL RULE OF LIQUID CRYSTAL DISPLAY PANEL

LST EN 61747-2-1-2002 液晶和固态显示设备 第 2-1 部分：无源矩阵单色 LCD 模块 空白详细规范（IEC 61747-2-1:1998）

Liquid crystal and solid-state display devices. Part 2-1: Passive matrix monochrome LCD modules. Blank detail specification (IEC 61747-2-1:1998)

IEC 61988-2-1:2002 等离子体显示板.第2-1部分:光学测量方法

Determines the measuring methods for characterizing the performance of colour plasma display modules in the following areas: 4 % window luminance; luminance uniformity; dark-room contrast ratio; white chromaticity and chromatic uniformity; colour gamut i

Plasma display panels - Part 2-1: Measuring methods, Optical

KS C IEC 61747-2:2002 液晶和固体显示器.第2部分:液晶显示模件.分规范

이 품종규격은 다음과 같은 액정 및 고체상태의 디스플레이 모듈에 적용한다.-정적/

Liquid crystal and solid－state display devices－Part 2：Liquid crystal display modules－Sectional specification

KS C IEC 61747-2-1:2002 液晶和固体显示器.第2-1部分:无源矩阵单色液晶显示模件.空白详细规范

1.1 이 규격은 수동 매트릭스 단색광 LCD 모듈에 대한 개별규격지침에 대하여 규정한

Liquid crystal and solid-state display devices-Part 2-1:Passive matrix monochrome LCD modules-Blank detail specification