共找到 333 条与 滤波器 相关的标准,共 23 页
本标准适用于载波机用带通压电陶瓷滤波器,它是按GB/T 12867《电子设备用压电陶瓷滤波器空白详细规范通讯设备用压电陶瓷越波器评定水平E》制订的。符合SJ 2956《电子设备甩压电陶瓷滤波器总规范》GB/T 12866《电子设备用压电陶瓷滤波器分规范通信设备用压电陶瓷滤波器》的要求。 中国电子元器件质量认证委员会标准机构是中国电子技术标准化研究所。
Piezoelectric ceramic filters for use in electronic equipment.Detail specification for Piezoelectric ceramic band-pass filters type LT300B、LT348B、LT396I、LT411.86B、LT420I、LT440B~LT652B、LT1.116MD、LT1.364MD、LT1.612MD、LT1.860M、LT2.108M amd LT2.35
What is BS EN 61012 - Filters used in measuring the audible sound in presence of ultrasound about? BS EN 61012 is an international standard used for Filters. This helps in manufacturing good quality electronic filters used in measuring the audible sounds in presence of ultrasound. BS EN 61012 standard specifies the electrical characteristics of a U-weighting filter mainly for use with sound level meters meeting the requirements of IEC 651 for the measurement of audible sound in the presence of ultrasound. Who is BS EN 61012 - Filters used in measuring the audible sound in presence of ultrasound
Filters for the measurement of audible sound in the presence of ultrasound
Surface acoustic wave (SAW) filters; part 2: guide to the use of surface acoustic wave filters (chapter III)
MIL-T-81782C(AS), dated 11 July 1977, has been reviewed and determined to be valid for use in acquisition.
TEST STATION, COMPUTER OJ-216( )/AWM-23(V)
This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). 1.1) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected i n the Part or Identifying Number (PIN). represent non-JAN class €i microcircuits i n accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 i n conjunction with compliant non-JAN devices". hardness assurance'(RHA) levels are reflected i n the PIN. Two product assurance classes consisting of military high r e l i a b i l i t y (device classes 6, Q, and Device class M microcircuits When avai labte, a choice of radiation
MICROCIRCUITS, LINEAR, 4TH ORDER ELLIPTIC NOTCH FILTER, MONOLITHIC SILICON
MIL-C-85247(AS), dated 23 June 1982, has been reviewed and determined to be valid for
COMPUTER, AIR DATA CP-1005A/A
this guide is intended to provide a basic understanding of the application, evaluation, and safety considerations of electromagnetic interference (EMI) power-line filters used in both ac and dc applications. It includes a basic description of the construction of an EMI power-line filter and its functions in providing suppression of conducted noise. In addition, it provides explanations of why seemingly identical filters may not give the same performance in a particular application. Finally, proper installation of these filters in equipment is discussed.
Guide on the application and evaluation of EMI power-line filters for commercial use
A brief statement of the purpose of the CRLCMP.
MISSION-CRITICAL COMPUTER RESOURCES SOFTWARE SUPPORT
This specification covers the requirements for one type of universal flight director computer, designated CPU-65/A.
COMPUTER, FLIGHT DIRECTOR CPU-65/A
MIL-C-48456(AR), dated 30 June 1981, with Amendment 1, dated 18 Febriiary 1984, tias bceii reviL'w~d aid determined to be viìlid for lise in acquizition
COMPUTER UNIT, FIRE CONTROL: 11732400
1. Domaine d'application 1.1 La présente norme s'applique aux filtres dont le courant nominal maximal est de 125 A et qui sont destinés à supprimer les parasites électromagnétiques provenant des machines et des appareils. Ces dispositifs doivent être raccordés à une source d'alimentation en courant alternatif, dont la tension nominale m aximale peut atteindre 600 V à une fréquence nominale maximale de 60 Hz.
Electromagnetic interference filters
Surface acoustic wave (SAW) filters; part 1: general information, standard values and test conditions; chapter I: general information and standard values; chapter II: test conditions
Lists ratings, characteristics, inspections and additional information which are to be included as minimum mandatory requirements in the detail specification, together with supplementary tests which may be called up at the discretion of the specification writer.
Blank detail specification for radio interference suppression filters of assessed quality - Basic and full assessment levels
General procedures to be followed for the capability approval of manufacturers wishing to release filter units under the provisions of clause 15 of BS 9000:Part 1:1981.
Specification for capability approval of manufacturers of passive radio interference suppression filter units of assessed quality generic data
本标准适用于一般无线电通信之 400 kHz ~ 32.1 MHz 之带通晶体滤波器(以下简称滤波器)。备考:本标准中附有{ }之单位及数值系国际单位 ( SI ),一并记下,仅作参考用。
Crystal Filters
本标准适用于高选择性和高稳定性声表面波滤波器。该滤波器预定用于黑白电视机图象中频电路。 本标准是对这种类型的滤波器规定优先额定值和特性,并从总规范(SJ 2968)中选择适用的质量评定程序、试验和测量方法以及给出一般性能要求。在详细规范中规定的试验严酷度和要求应具有与本规范相同或较高的性能水平。
Sectional specification for surface acoustic wave (SAW) filters for use in electronic equipment--Surface acoustic wave (SAW) filters for IF circuit of black-and-white TV receivers
Surface acoustic wave(SAW) filters for IF circuit of black-and-white TV receivers Assessment level E
Prescribes terms, methods of test and inspection requirements for radio interference suppression filters, including mains filter units, for use in the electrical power supply to electronic or electric equipment. To be read in conjunction with BS 9000
Specification for radio interference suppression filters of assessed quality: generic data and methods of test
MIL-STD-1750A(USAF) dated 2.JuIY 1980 and Notice 1 dated 21 May 82 have been reviewed and determined to be valid for use in acquisition
SIXTEEN-BIT COMPUTER INSTRUCTION SET ARCHITECTURE
Complete filter units for radio interference suppression. Part 2: Sectional specification - Selection of methods of test and general requirements
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号