31.220.01 机电元件综合 标准查询与下载

JIS C 5402-22-1:2016 电子设备连接器. 试验和测量. 第22-1部分: 电容试验. 试验22a: 电容

Connectors for electronic equipment -- Tests and measurements -- Part 22-1: Capacitance tests -- Test 22a: Capacitance

JIS C 5402-8-2:2016 电子设备连接器. 试验和测量. 第8-2部分: 静荷载试验(固定式连接器). 试验8b: 轴向静荷载

Connectors for electronic equipment -- Tests and measurements -- Part 8-2: Static load tests (fixed connectors) -- Test 8b: Static load, axial

JIS C 5402-7-1:2016 电子设备连接器. 试验和测量. 第7-1部分: 冲击试验 (自由连接器). 试验7a: 自由跌落 (重复性)

Connectors for electronic equipment -- Tests and measurements -- Part 7-1: Impact tests (free connectors) -- Test 7a: Free fall (repeated)

JIS C 5402-8-3:2016 电子设备连接器. 试验和测量. 第8-3部分: 静态荷载试验 (固定连接器). 试验8c: 启动杆稳健性

Connectors for electronic equipment -- Tests and measurements -- Part 8-3: Static load tests (fixed connectors) -- Test 8c: Robustness of actuating lever

JIS C 5402-9-1:2016 电子设备连接器. 试验和测量. 第9-1部分: 耐久性试验. 试验9a: 机械操作

Connectors for electronic equipment -- Tests and measurements -- Part 9-1: Endurance tests -- Test 9a: Mechanical operation

JIS C 5402-8-1:2016 电子设备连接器. 试验和测量. 第8-1部分: 静态荷载试验 (固定连接器). 试验8a: 静态横向负荷

Connectors for electronic equipment -- Tests and measurements -- Part 8-1: Static load tests (fixed connectors) -- Test 8a: Static load, transverse

KS C IEC 60512-1-3-2015 电子设备机电元件 基本试验程序和测量方法 第1部分：一般检验 第3节：试验1c 电气接合长度

Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 1：General examination－Section 3：Test 1c－Electrical engagement length

KS C IEC 60512-1-3:2015 电子设备用机电元件 基本试验程序和测量方法 第1部分：一般检测 第3节 试验1c 电接合长度

Electromechanical components for electronic equipment－Basic testing procedures and measuring methods－Part 1：General examination－Section 3：Test 1c－Electrical engagement length

GSO IEC 60512-9-2:2015 电子设备连接器 测试和测量操作 第9-2部分：耐久性测试：测试 9b：电负载和温度

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to assess the ability of a connector to withstand elevated temperatures with electrical loading.

Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature

GSO IEC 60512-11-1:2015 电子设备机电元件 基本测试程序和测量方法 第11部分：气候测试 第 1 节：测试 11a 气候顺序

This section of IEC 512-11 defines a standard test method to assess the ability of a component to function in a specified manner, in a specified environment which might be encountered during normal use, including storage. NOTE — This series of documents is in the process of being revised; the future numbering is given in brackets.

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence

GSO IEC 60512-1-3:2015 电子设备机电元件 基本测试程序和测量方法 第1部分：一般检查 第 3 节：测试 1c 电气接合长度

This section of IEC 60512-1, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for similar components when specified in a detail specification. The object of this test is to define a standard test method to measure the electrical engagement length in a connector as defined in IEV 581-03-15.

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length

GSO IEC 60512-15-8:2015 电子设备的机电元件 基本试验程序和测量方法 第15部分：触点和端子的机械试验 第8部分：试验 15h 仪器应用的接触调节系统的电阻

This section of IEC 512-15 defines standard test method to check the ability of connectors to withstand the use of standardised tooling for insertion and extraction of contacts.

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application

GSO IEC 60512-1-4:2015 电子设备的机电元件 基本测试程序和测量方法 第1部分：一般原则 第4节：测试 1(d) 接触保护（防漂移）的有效性

This section of IEC 60512-1 is to be used when referenced by the detail specification to test mechanical components overseen by the IEC subcommittee 48B. This test can also be done on similar devices when the detail specification so prescribes. The object of this test is to define a standard test method to verify the ability of a connector to prevent the accidental touching of its contact by the front of the mating connector. It is primarily intended to be applied to cylindrical multi-contact connectors which are required to be scoop-proof.

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

GSO IEC 60512-11-8:2015 电子设备的机电元件 基本试验程序和测量方法 第11部分：气候试验 第8部分：试验 11 (h) 沙子和灰尘

This section of IEC 512-11 defines a standard test method to assess the ability of a connector to withstand driving fine sand and dust.

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust

GSO IEC 60512-14-7:2015 电子设备机电元件 基本测试程序和测量方法 第14部分：密封测试 第 7 节：测试 14g：冲击水

This section of IEC 60512-14, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for similar components when specified in a detail specification. This section of IEC 60512-14 defines a standard test method to assess the effects of impacting water or specified fluid on electrical connecting devices.

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water

GSO IEC 60512-9-3:2015 电子设备连接 测试和测量 第9-3部分：耐久性测试 测试 9C：具有电气耐久性的机械操作（使用和断开）

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. This test may also be used for similar devices when specified in a detail specification. The object of this standard is to define a standard test method to assess the mechanical and electrical operational endurance, i.e. engaging and separating cycles, of a connector in an operating mode which includes a specified electrical load.

Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load

GSO IEC 60512-12-6:2015 电子设备的机电元件 基本测试程序和测量方法 第12部分：焊接测试 第6节：测试 12f：焊接设备中焊剂和清洁溶剂的密封

This section of IEC 512-12, when required by the detail specification, is to be used for testing electromechanical components within the scope of technical committee 48*. This test may also be used for similar components when specified in a detail specification. The object of this test is to detail a standard test method to verify the effectiveness of the sealing of a component against flux and cleaning solvents during the machine soldering process. The results of this test may not be representative for other fluxes; e.g. resin-reduced foam flux, other fluxing and cleaning methods as prescribed herein.

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering

GSO IEC 60512-16-20:2015 电子设备的机电元件 基本试验程序和测量方法 第16部分：触点和端子的机械试验 第20节：试验 16t 机械耐久性（无焊连接的接线端子）

This section of IEC 512-16, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for similar components when specified in a detail specification. The object of this test is to detail a standard method to assess the mechanical strength of solderless connections including integrated strain relief features.

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)

GSO IEC 60512-19-3:2015 电子设备的机电元件 基本测试程序和测量方法 第19部分：耐化学性测试 第3节：测试 19c 耐流体性

This section of IEC 60512-19, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for similar components when specified in a detail specification. The object of this test is to define a standard test method to assess the effects of accidental exposure to fluids and lubricants on electrical connecting devices.

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance

GSO IEC 60512-20-2:2015 电子设备机电元件 基本测试程序和测量方法 第20-2部分：测试 20b 易燃性测试 防火性

This part of IEC 60512, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for similar components when specified in a detail specification. The object of this test is to detail a standard method to assess the ability of a connector to withstand specified flame and vibration during a 20 min exposure by providing specified electrical performance for the first 6 min of exposure and preventing the flame from penetrating the fireproof bulkhead on which the connector is mounted throughout the test.

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness