31.220.01 机电元件综合 标准查询与下载

LST EN 60603-7-2010/A1-2012 电子设备用连接器 第7部分：8 路、非屏蔽、自由和固定连接器的详细规范（IEC 60603-7:2008/A1:2011）

Connectors for electronic equipment -- Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 60603-7:2008/A1:2011)

ANSI/SCTE 186-2012 电缆电信设施产品的环境要求

Product Environmental Requirements for Cable Telecommunications Facilities

LST EN 61076-2-2011 电子设备连接器 产品要求 第2部分：圆形连接器分规范（IEC 61076-2:2011）

Connectors for electronic equipment - Product requirements -- Part 2: Sectional specification for circular connectors (IEC 61076-2:2011)

IEC 60603-7:2008+AMD1:2011 CSV 电子设备连接器第7部分:8路非屏蔽自由和固定连接器详细规范

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

IEC 60603-7:2011 电子设备连接器第7部分:8路非屏蔽自由和固定连接器详细规范

This part of IEC 60603-7 covers 8-way unshielded free and fixed connectors@ it is intended to specify the common dimensions@ mechanical@ electrical and environmental characteristics and tests for the family of IEC 60603-7-x connectors. These connectors are intermateable (according to IEC 61076-1 level 2) and interoperable with other IEC 60603-7 series connectors.

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

LST EN 60512-9-3-2011 电子设备连接器 测试和测量 第 9-3 部分：耐久性测试 测试 9c：带电负载的机械操作（接合/分离）（IEC 60512-9-3:2011）

Connectors for electronic equipment - Tests and measurements -- Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load (IEC 60512-9-3:2011)

LST EN 60512-17-2-2011 电子设备连接器 测试和测量 第 17-2 部分：电缆夹紧测试 测试 17b：电缆夹具对电缆旋转的抵抗力（IEC 60512-17-2:2011）

Connectors for electronic equipment - Tests and measurements -- Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation (IEC 60512-17-2:2011)

LST EN 60512-9-4-2011 电子设备连接器 测试和测量 第 9-4 部分：耐久性测试 测试 9d：触点保持系统和密封件的耐久性（维护、老化）（IEC 60512-9-4:2011）

Connectors for electronic equipment - Tests and measurements -- Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing) (IEC 60512-9-4:2011)

LST EN 60512-8-2-2011 电子设备连接器 测试和测量 第 8-2 部分：静态负载测试（固定连接器） 测试 8b：静态负载，轴向（IEC 60512-8-2:2011）

Connectors for electronic equipment - Tests and measurements -- Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial (IEC 60512-8-2:2011)

LST EN 60512-8-3-2011 电子设备连接器 测试和测量 第 8-3 部分：静态负载测试（固定连接器） 测试 8c：致动杆的稳健性（IEC 60512-8-3:2011）

Connectors for electronic equipment - Tests and measurements -- Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever (IEC 60512-8-3:2011)

BS EN 62047-10:2011 半导体装置.微电子机械装置.MEMS材料的微型柱压缩试验

Semiconductor devices. Micro-electromechanical devices. Micro-pillar compression test for MEMS materials

BS EN 60512-17-2:2011 电子设备用连接器.试验和测量.电缆夹紧试验.测试17b.电缆夹阻挡电缆旋转

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard method to assess the ability of a cableclamping device to allow rotary movement of the cable/wire bundle without damage to the external surface of the cable/wire bundle, the cable-clamping device, the connector or the sub-assembly.

Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17b. Cable clamp resistance to cable rotation

BS EN 60512-8-3:2011 电子设备用连接器.试验和测量.静荷载试验(固定连接器).测试8c.启动杆稳健性

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to assess the robustness of the actuating lever of a connector mating or release mechanism.

Connectors for electronic equipment. Tests and measurements. Static load tests (fixed connectors). Test 8c. Robustness of actuating lever

BS EN 60512-8-2:2011 电子设备用连接器.试验和测量.静荷载试验(固定连接器).试验8b.轴向静荷载

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to determine the ability of a fixed connector to withstand a steady axial force which might occur during normal use.

Connectors for electronic equipment. Tests and measurements. Static load tests (fixed connectors). Test 8b. Static load, axial

BS EN 60512-9-4:2011 电子设备连接器.试验和测量.耐久试验.试验9d.触点固定系统及密封件的耐久性(维护,老化处理)

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to assess the ability of a connector to withstand stresses caused by repeated extraction and insertion of contacts during maintenance.

Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9d. Durability of contact retention system and seals (maintenance, ageing)

EN 60512-8-2:2011 电子设备连接器 测试和测量 第 8-2 部分：静态负载测试（固定连接器） 测试 8b：静态负载，轴向

IEC 60512-8-2:2011 when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to determine the ability of a fixed connector to withstand a steady axial force which might occur during normal use. This standard cancels and replaces Test 8b of IEC 60512-5, issued in 1992, and constitutes a technical revision. This publication is to be read in conjunction with IEC 60512-1:2001 and IEC 60512-1-100:2006.

Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial

EN 60512-17-2:2011 电子设备连接器 试验和测量 第 17-2 部分：电缆夹紧试验 试验 17b：电缆夹对电缆旋转的阻力

IEC 60512-17-2:2011 when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard method to assess the ability of a cable-clamping device to allow rotary movement of the cable/wire bundle without damage to the external surface of the cable/wire bundle, the cable-clamping device, the connector or the sub-assembly. This standard cancels and replaces Test 17b of IEC 60512-5, issued in 1992, and constitutes a technical revision. This publication is to be read in conjunction with IEC 60512-1:2001 and IEC 60512-1-100:2006.

Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation

LST EN 60512-23-2-2011 电子设备连接器 测试和测量 第 23-2 部分：筛选和过滤测试 测试 23b：集成滤波器的抑制特性（IEC 60512-23-2:2010）

Connectors for electronic equipment - Tests and measurements -- Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters (IEC 60512-23-2:2010)

LST EN 60512-8-1-2011 电子设备连接器 测试和测量 第 8-1 部分：静态负载测试（固定连接器） 测试 8a：静态负载，横向（IEC 60512-8-1:2010）

Connectors for electronic equipment - Tests and measurements -- Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse (IEC 60512-8-1:2010)

LST EN 60512-17-1-2011 电子设备连接器 测试和测量 第 17-1 部分：电缆夹具测试 测试 17a：电缆夹具坚固性（IEC 60512-17-1:2010）

Connectors for electronic equipment - Tests and measurements -- Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness (IEC 60512-17-1:2010)