33.020 电信综合 标准查询与下载

SH/T 3153-2007 石油化工企业电信设计规范

本规范规定了石油化工企业电信设计的内容、系统构成、设计原则和设置要求。 本规范适用于石油化工企业新建、扩建和改建工程的电信系统设计。

Specification for design of telecommunication for petrochemical factory

SH/T 3028-2007 石油化工装置电信设计规范

1.1本规范规定了石油化工装置电信设计的基本内容、系统构成、设置要求等。界定了石油化工装置电信各项设计内容的相关术语。 1.2本规范适用于新建、改建或扩建的石油化工装置的电信设计。电信设计内容主要包括电话配线、无线通信、扩音对讲系统、电视监视系统、火灾自动报警系统、数据通信、电信线路等。 1.3执行本规范时，尚应符合国家现行的有关标准、规范的规定。

Specification for design of telecommunication for unit in petrochemical industry

LST ETS 300 207-4 Leid.1-2007 综合业务数字网（ISDN）；转移补充业务；第一数字用户信令系统（DSS1）协议；第4部分：抽象测试套件（ATS）和部分协议实施附加信息测试（PIXIT）形式

Integrated Services Digital Network (ISDN);Diversion supplementary services;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma s

LST ETS 300 174 Leid.1-2007/A1-2007 网络方面（NA）；分量电视信号的数字编码，用于 34 45 Mbit/s 范围内的贡献质量应用

Network Aspects (NA);Digital coding of component television signals for contribution quality applications in the range 34 - 45 Mbit/s

LST ETS 300 161 Leid.2-2007 卫星地球站和系统（SES）；甚小孔径终端（VSAT）网络的集中控制和监测功能

Satellite Earth Stations and Systems (SES);Centralized control and monitoring functions for Very Small Aperture Terminal (VSAT) networks

LST ETS 300 160 Leid.2-2007 卫星地球站和系统（SES）；甚小孔径终端（VSAT）的控制和监测功能

Satellite Earth Stations and Systems (SES);Control and monitoring functions at a Very Small Aperture Terminal (VSAT)

LST ETS 300 207-6 Leid.1-2007 综合业务数字网（ISDN）；转移补充业务；第一数字用户信令系统（DSS1）协议；第6部分：抽象测试套件（ATS）和部分协议实施附加信息测试（PIXIT）形式

Integrated Services Digital Network (ISDN);Diversion supplementary services;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma s

LST EN 300 132-2 V2.2.1-2007 环境工程（EE）；电信设备输入端的电源接口；第2部分：直流电（dc）操作

Environmental Engineering (EE);Power supply interface at the input to telecommunications equipment;Part 2: Operated by direct current (dc)

DS/EN 300175-8 V2.1.1:2007 数字增强型无绳电信（DECT）；通用接口（CI）；第8部分：语音编码和传输

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).This part of the DECT CI specifies the speech coding and transmission requirements.In order to ensure satisfactory interworking of different portable and fixed units, it is necessary to specify the transmission performance of the analogue information over the digital link. This requires not only use of a common speech algorithm, but also standardization of frequency responses, reference speech levels (or loudness) at the air interface and various other parameters.The present document applies to DECT equipment which i

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech coding and transmission

DS/EN 300175-7 V2.1.1:2007 数字增强型无绳电信（DECT）；通用接口（CI）；第7部分：安全功能

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).The present document specifies the security architecture, the types of cryptographic algorithms required, the way in which they are to be used, and the requirements for integrating the security features provided by the architecture into the DECT CI. It also describes how the features can be managed and how they relate to certain DECT fixed systems and local network configurations.The security architecture is defined in terms of the security services which are to be supported at the CI, the mechanisms which are to be

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features

DS/EN 300175-6 V2.1.1:2007 数字增强型无绳电信（DECT）；通用接口（CI）；第6部分：身份和寻址

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).This part specifies the identities and addressing structure of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).There are four categories of identities to be used for identification and addressing in a general DECT environment. These four categories are:• Fixed Part (FP) identities;• Portable Part (PP) identities;• connection-related identities;• equipment-related identities.Fixed part identities and portable part identities are used for:• access information from fixed parts to portable p

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6: Identities and addressing

DS/EN 300175-5 V2.1.1:2007 数字增强型无绳电信（DECT）；通用接口（CI）；第5部分：网络（NWK）层

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).This part of the DECT CI specifies the Network (NWK) layer. The NWK layer is part 5 of the EN 300 175 and layer 3 of the DECT protocol stack.The present document only specifies the C-plane (control plane) of the DECT NWK layer. It contains no specification for the U-plane (user plane) because the U-plane is null for all services at the DECT NWK layer. The C-plane contains all of the internal signalling information, and the NWK layer protocols are grouped into the following families of procedures:• Call Control (CC);•

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer

DS/EN 300175-4 V2.1.1:2007 数字增强型无绳电信（DECT）；通用接口（CI）；第4部分：数据链路控制（DLC）层

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).The present document specifies the Data Link Control (DLC) layer. The DLC layer is part 4 of the DECT CI standard and layer 2b of the DECT protocol stack.Two planes of operation are specified for this DLC (sub)layer. These planes are called the Control plane (C-plane) and the User plane (U-plane).The C-plane is mostly concerned with the DECT signalling aspects. It provides a reliable point-to-point service that uses a link access protocol to offer error protected transmission of Network (NWK) layer messages. The C-pl

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data Link Control (DLC) layer

DS/EN 300175-3 V2.1.1:2007 数字增强型无绳电信（DECT）；通用接口（CI）；第3部分：媒体访问控制（MAC）层

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).This part of the DECT CI specifies the Medium Access Control (MAC) layer. The MAC layer is part 3 of the DECT Common Interface standard and layer 2a of the DECT protocol stack.It specifies three groups of MAC services:• the broadcast message control service;• the connectionless message control service; and• the multi-bearer control service.It also specifies the logical channels that are used by the above mentioned services, and how they are multiplexed and mapped into the Service Data Units (SDUs) that are exchanged

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer

DS/EN 300175-2 V2.1.1:2007 数字增强型无绳电信（DECT）；通用接口（CI）；第2部分：物理层（PHL）

The present document is one of the parts of the specification of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI).This part of the DECT CI specifies the physical channel arrangements. DECT physical channels are radio communication paths between two radio end points. A radio end point is either part of the fixed infrastructure, a privately owned Fixed Part (FP), typically a base station, or a Portable Part (PP), typically a handset. The assignment of one or more particular physical channels to a call is the task of higher layers.The Physical Layer (PHL) interfaces with the Medium Access Control (MAC) layer, and with the Lower Lay

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical Layer (PHL)

DS/EN 300175-1 V2.1.1:2007 数字增强型无绳电信（DECT）；通用接口（CI）；第1部分：概述

The present document gives an introduction and overview of the complete Digital Enhanced CordlessTelecommunications (DECT) Common Interface (CI).The present document contains an abstract of the other parts of the DECT standard together with a general descriptionof:• the objectives of the present document;• the DECT Common Interface;• the protocol architecture of DECT.The present document also provides an extensive vocabulary; in particular it contains the common definitions of all the technical terms used in different parts of the present document.The present document includes New Generation DECT, a further development of the DECT standard introducing wideb

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview

DS/EN 302194-2 V1.1.2:2007 电磁兼容性和无线电频谱问题（ERM）；用于内河航道的导航雷达；第2部分：包含 R&TTE 指令第 3.2 条基本要求的协调 EN

The present document states the minimum technical characteristics and methods of measurement required for navigation radar used on inland waterways.This radar equipment operates in the frequency range of 9 300 MHz to 9 500 MHz allocated to the radio navigation service as defined in article 5 of the Radio Regulations [2].The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) Article 3.2, which states that ""… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference"".In addition to t

Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

DS/EN 300392-5 V1.3.1:2007 地面集群无线电（TETRA） 语音加数据（V+D） 第5部分：外围设备接口（PEI）

The present document specifies the functional and technical aspects of TETRA Peripheral Equipment Interface (PEI) that is the interface between a Terminal Equipment type 2 (TE2) and a Mobile Termination type 2 (MT2) at reference point RT.

Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 5: Peripheral Equipment Interface (PEI)

DS/EN 300392-12-1 V1.2.2:2007 地面集群无线电（TETRA） 语音加数据（V+D） 第12部分：补充服务第 3 阶段 第 1 子部分：呼叫识别（CI）

The present document specifies the stage 3 description of the Supplementary Services CLIP, CLIR and COLP all part of Call Identification for the Terrestrial Trunked Radio (TETRA). The term ""Line"" is used in the present document to design either the line of a ""LS"" Line Station or by extension the TETRA Air Interface. NOTE 1: In order to use the same name for supplementary services as ECMA. Calling Line Identification Presentation (SS-CLIP) is a supplementary service which is offered to the called user and which provides the calling user identity.

Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 12: Supplementary services stage 3 - Sub-part 1: Call Identification (CI)

DS/EN 301447 V1.1.1:2007 卫星地球站和系统（SES）；在分配给固定卫星服务（FSS）的 4/6 GHz 频段运行的船载卫星地球站（ESV）的协调 EN 涵盖第 3.2 条关于 R&

To provide norms for the operation of ESVs operating in the 4/6 GHz frequency bands.

Satellite Earth Stations and Systems (SES); Harmonized EN for satellite Earth Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering essential requirements of article 3.2 on the R&