共找到 527 条与 交换和信令系统 相关的标准,共 36 页
Integrated Services Digital Network (ISDN) - Layer 3 Signaling Specification for Circuit Switched Bearer Service for Digital Subscriber Signaling System Number 1 (DSS1)
Signalling System Number 7 (SS7) - Operations, Maintenance, and Administration Part (OAMP)
The Release To Pivot (RTP) network capability permits an SS7 Signalling Point that has received a call from another Node, and has determined the call should be connected to a Destination Node other than itself, to have the connection established from a N
Telecommunications - Signalling System Number 7 (SS7) - Release to Pivot (RTP)
Signalling System 7 (SS7) - SCCP Class 0 Compatibility Testing
This standard specifies the procedures for the establishing, maintaining, and clearing of network connections at the Integrated Services Digital Network (ISDN) user-network interface for support of circuit-switched calls. These procedures are defined in
Integrated Services Digital Network (ISDN) - Layer 3 Signaling Specification for Circuit Switched Bearer Service for Digital Subscriber Signaling System Number 1 (DSS1)
Signalling System Number 7 (SS7) - MTP Levels 2 and 3 Compatibility Testing
Provides the testing requirements for internetwork connections employing Common Channel Signalling (CCS) based on Signalling System No. 7 (SS7) protocol used in North America. This standard provides a list of test scripts for testing the compatibility be
Telecommunications – Signalling System Number 7 (SS7) – MTP Levels 2 and 3 Compatibility Testing
Applicable to the interconnection of data terminal equipment (DTE) and data circuit-terminating equipment (DCE) employing serial binary data operation via the ITU-T Recommendation V.24, 100-series interchange circuits.
Serial Asynchronous Automatic Dialing and Control
Carrier Service Provider Identification (CSPI) information is intended to identify to intermediate switches all presubscribed carriers associated with a calling party. Identifiable carrier service providers include the preferred intraLATA toll carrier, t
Signalling System Number 7 (SS7) - Carrier Service Provider Identification (CSPI)
Integrated Services Digital Network (ISDN) - Signaling Specification for X.25 Packet - Switched Bearer Service for Digital Subscriber Signaling System Number 1 (DSS1)
Technical Report TRQ.2320: Bearer control signalling requirements - Third-party bearer control
This Supplement specifies the signalling requirements for bearer control capability by the root-party in a call. The bearer control functional entity actions by a root-party in a call are defined in terms of information flows. This Supplement is intended to specify the essential UNI and NNI interactions required to develop root-party initiated bearer control functional entity actions.
Technical Report TRQ.2300: Bearer control signalling requirements - Root-party bearer control
This Supplement specifies the signalling requirements for the root-party coordinated call control and bearer control capability. These coordinated call control and bearer control functional entity actions are defined in terms of information flows. This Supplement is intended to specify the essential UNI and NNI interactions required to develop root-party coordinated call control and bearer control functional entity actions.
Technical Report TRQ.2100: Coordinated call control and bearer control signalling requirements - Root-party coordinated call and bearer control
This Supplement specifies the signalling requirements for the basic call control capability. The call control functional entity actions are defined in terms of information flows. This Supplement is intended to specify the essential UNI and NNI interactions required to develop call control functional entity actions.
Technical Report TRQ.2200: Call control signalling requirements - Party call control
This Supplement to ITU-T Recommendation Q.1901 specifies the general aspects of Bearer Independent Call Control (BICC) protocol mapping with Digital Subscriber Signalling System No. 2 (DSS2) for AAL Type 1 bearer.
Technical Report TRQ.3000: Operation of the bearer independant call control (BICC) protocol with digital subscriber signalling system No. 2 (DSS2)
This Supplement specifies the signalling requirements for bearer control capability of the leaf-party of a call. The bearer control functional entity actions by a leaf-party of a call are defined in terms of information flows. This Supplement is intended to specify the essential UNI and NNI interactions required to develop leaf-party bearer control functional entity actions.
Technical Report TRQ.2310: Bearer control signalling requirements - Leaf-party bearer control
Technical Report TRQ.2002: Information flow elements
This Supplement compares different types of methodologies for service modelling to determine their suitability in relation to protocol development for IN in the IN CS-4 time-frame. It also investigates the evolution from SIB based techniques and considers different technologies such as APIs. This Supplement supplements the information contained within Recommendation Q.65. Rational The purpose of this Supplement is to provide a discussion of service modelling aspects related to IN CS-4.
Service Modelling: Evolution to the use of object oriented techniques
This Supplement to ITU-T Recommendation Q.1901 describes the general aspects of the operation of the Bearer Independent Call Control (BICC) protocol with AAL type 2 signalling protocol, Capability Set 1 (CS-1), used to control AAL type 2 Bearer Connections.
Supplement to ITU-T Q.1901 Recommendation - Technical Report TRQ.3010: Operation of the bearer independant call control (BICC) protocol with AAL type 2 signalling protocol (CS-1)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号