33.070.30 数字增强型无绳通信(DECT) 标准查询与下载

DS/EN 301469-6 V1.1.1:2001 数字增强型无绳电信（DECT）； DECT 分组无线电服务（DPRS）测试用例库（TCL）；第6部分：抽象测试套件（ATS） 数据链路控制（DLC）层 固定无线电终端（FT）

The present document contains the Abstract Test Suite (ATS) specification to test the DECT Packet Radio Service (DPRS) Data Link Control (DLC) layer at the Fixed radio Termination (FT). The objective of this test specification is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturers' DECT equipment.

Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case Library (TCL); Part 6: Abstract Test Suite (ATS) -Data Link Control (DLC) layer -Fixed radio Termination (FT)

DS/EN 301469-1 V1.1.1:2001 数字增强型无绳电信（DECT）； DECT 分组无线电服务（DPRS）测试用例库（TCL）；第1部分：测试套件结构（TSS）和测试目的（TP） 媒体访问控制（MAC）层

The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the DECT Packet Radio Service (DPRS) Medium Access Control (MAC) layer. The objective of this test specification is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturers' DECT equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [6] and ISO/IEC 9646-2 [7]) as well as the ETSI rules for conformance testing (ETS 300 406 [5]) are used as a basis for the test methodology.

Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case Library (TCL); Part 1: Test Suite Structure (TSS) and Test Purposes (TP) -Medium Access Control (MAC) layer

DS/EN 301469-2 V1.1.1:2001 数字增强型无绳电信（DECT）； DECT 分组无线电服务（DPRS）测试用例库（TCL）；第2部分：抽象测试套件（ATS） 媒体访问控制（MAC）层 便携式无线电终端（PT）

The present document contains the Abstract Test Suite (ATS) specification to test the DECT Packet Radio Service (DPRS) Medium Access Control (MAC) layer at the Portable radio Termination (PT). The objective of this test specification is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturers' DECT equipment.

Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case Library (TCL); Part 2: Abstract Test Suite (ATS) -Medium Access Control (MAC) layer -Portable radio Termination (PT)

DS/EN 301469-4 V1.1.1:2001 数字增强型无绳电信（DECT）； DECT 分组无线电服务（DPRS）测试用例库（TCL）；第4部分：测试套件结构（TSS）和测试目的（TP） 数据链路控制（DLC）层

The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the DECT Packet Radio Service (DPRS) Data Link Control (DLC) layer. The objective of this test specification is to provide a basis for conformance tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturers' DECT equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4] and ISO/IEC 9646-2 [5]) as well as the ETSI rules for conformance testing (ETS 300 406 [3]) are used as a basis for the test methodology.

Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS) Test Case Library (TCL); Part 4: Test Suite Structure (TSS) and Test Purposes (TP) -Data Link Control (DLC) layer

DS/EN 300700 V1.2.1:2001 数字增强型无绳电信（DECT）；无线中继站（WRS）

The present document defines the Digital Enhanced Cordless Telecommunications (DECT) Wireless Relay Station (WRS). A WRS is an additional building block for the DECT fixed network. The present document defines provisions needed for a controlled and reliable application of the DECT WRS infrastructure building block. These provisions are not related to any specific profile.

Digital Enhanced Cordless Telecommunications (DECT); Wireless Relay Station (WRS)

DS/EN 301361-2 V1.1.1:2001 数字增强型无绳电信（DECT）；综合业务数字网（ISDN）； ISDN 移动协议互通规范配置文件（IMIP）；第2部分：全球移动通信系统（GSM）支持的 DECT/ISDN 互通

The present document specifies a set of technical requirements for Digital Enhanced Cordless Telecommunications (DECT) Fixed Parts (FP) supporting connection, via an ISDN interface, to a network supporting terminal mobility. The present document covers the requirements necessary for the support of Cordless Terminal Mobility (CTM) (Part 1) and for the support of the DECT access to GSM via ISDN interfaces (Part 2). The present document specifies the interworking procedures between the Digital Enhanced Cordless Telecommunications (DECT) air interface and the mobility management protocols defined for Integrated Services Digital Network (ISDN) interfaces.

Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); ISDN Mobility protocol Interworking specification Profile (IMIP); Part 2: DECT/ISDN interworking for Global System for Mobile communications (GSM) support

ANSI/TIA/EIA 136-290-A-2001 136HS 户外 ，136HS 户内传播器的无线电接口射频最低性能

this section describes RF minimum performance for 136HS outdoor and 136HS indoor bearers

Radio Interface RF Minimum Performance for 136HS Outdoor 136HS Indoor Bearers

ANSI/TIA/EIA 136-310-A-1-2001 TDMA第三代无线系统.无线电链路协议,补充件1

this addendum makes corrections to TIA/EIA-136-310-A

TDMA Third Generation Wireless-Radio Link Protocol, Addendum 1

DS/EN 302096 V0.2.3:2000 数字增强型无绳电信（DECT）；无绳终端移动性（CTM）；功能包 1（FP1）； CTM 电路交换数据配置文件，32 kbit/s 和 64 kbit/s 无限制数字信息（UDI）

The present document specifies that set of technical requirements for Digital Enhanced Cordless Telecommunications (DECT) Fixed Part (FP) and DECT Portable Part (PP) necessary for the support of the Cordless Terminal Mobility (CTM) Feature Package 1 (CTM-FP1).

Digital Enhanced Cordless Telecommunications (DECT); Cordless Terminal Mobility (CTM); Feature Package 1 (FP1); CTM circuit-switched data profile, 32 kbit/s and 64 kbit/s Unrestricted Digital Information (UDI)

DIN EN 301361-2:2000 数字增强无线远程通信(DECT).综合业务数字网(ISDN).ISDN移动协议交换规范协议子集(IMIP):第2部分:移动通信全球系统(GSM)支持用DETC/ISDN互连(英文版本核准本 EN 301361-2 V 1.1.1 (2000-02) 作为德国标准)

The document specifies requirements in the telecommunications sector.

Digital Enhanced Cordless Telecommunications (DECT) - Integrated Services Digital Network (ISDN); ISDN Mobility protocol Interworking specification Profile (IMIP) - Part 2: DECT/ISDN interworking for Global System for Mobile communications (GSM) support (

DS/EN 301273 V1.1.3:2000 无绳终端移动性（CTM）；阶段2;服务说明

The present document defines the stage 1 service description for phase 2 of the CTM service. Stage 1 is an overall service description, primarily from the service subscriber's and user's point of view, but does not deal with the details of the human interface itself. The present document includes information applicable to network operators and terminal, switch and database manufacturers.

Cordless Terminal Mobility (CTM); Phase 2; Service description

DS/EN 301361-1 V1.1.1:2000 数字增强型无绳电信（DECT）；综合业务数字网（ISDN）； ISDN 移动协议互通规范配置文件（IMIP）；第1部分：无绳终端移动性（CTM）支持的 DECT/ISDN 互通

The present document specifies a set of technical requirements for Digital Enhanced Cordless Telecommunications (DECT) Fixed Parts (FP) supporting connection, via an ISDN interface, to a network supporting terminal mobility. The standard covers the requirements necessary for the support of Cordless Terminal Mobility (CTM) Phase 1 (Part 1) and for the support of the DECT access to GSM via ISDN interfaces (Part 2). In both of these scenarios, the FT is connected to the network via the alpha interface, as specified in EN 301 144-1 [8].

Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); ISDN Mobility protocol Interworking specification Profile (IMIP); Part 1: DECT/ISDN interworking for Cordless Terminal Mobility (CTM) support

DS/EN 301371-1 V0.0.1:2000 数字增强型无绳电信（DECT）；无绳终端移动性（CTM）； CTM 访问配置文件（CAP）；配置文件测试规范（PTS）；第1部分：总结

The present document specifies the Profile Test Specification (PTS) summary referencing all the ENs necessary for the conformance testing of the DECT CTM Access Profile (CAP). This CAP PTS summary together with the ENs it references constitute the CAP PTS. The present document has the following structure: - clause 4 contains general information relative to the profile including references to the related ENs; - clause 5 contains a summary and references to the ENs relevant for each of DECT protocol layers to be tested.

Digital Enhanced Cordless Telecommunications (DECT); Cordless Terminal Mobility (CTM); CTM Access Profile (CAP); Profile Test Specification (PTS); Part 1: Summary

DS/EN 300497-2 V0.3.1:2000 数字增强型无绳电信（DECT）；通用接口（CI）；测试用例库（TCL）；第2部分：媒体访问控制（MAC）层的抽象测试套件（ATS） 便携式无线电终端（PT）

The present document contains the Abstract Test Suite (ATS) to test the DECT Portable Part (PP) Medium Access Control (MAC) layer. The objective of this test specification is to provide a basis for approval tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturer's DECT equipment. This test specification contains the ATS specification for testing of the MAC layer at the Portable radio Termination (PT).

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Test Case Library (TCL); Part 2: Abstract Test Suite (ATS) for Medium Access Control (MAC) layer - Portable radio Termination (PT)

DS/EN 300497-4 V0.3.0:2000 数字增强型无绳电信（DECT）；通用接口（CI）；测试用例库（TCL）；第4部分：测试套件结构（TSS）和测试目的（TP） 数据链路控制（DLC）层

The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the Digital Enhanced Cordless Telecommunications (DECT) Data Link Control (DLC) layer. The objective of this test specification is to provide a basis for approval tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturer's DECT equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [10] and ISO/IEC 9646-2 [11]) as well as the ETSI rules for conformance testing (ETS 300 406 [9]) are used as the basis for the test methodology. Test specifications for the Physical Layer (PHL), Med

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Test Case Library (TCL); Part 4: Test Suite Structure (TSS) and Test Purposes (TP) -Data Link Control (DLC) layer

DS/EN 300497-5 V0.3.0:2000 数字增强型无绳电信（DECT）；通用接口（CI）；测试用例库（TCL）；第5部分：抽象测试套件（ATS） 数据链路控制（DLC）层

The present document contains the Abstract Test Suite (ATS) to test the Digital Enhanced Cordless Telecommunications (DECT) Data Link Control (DLC) layer. The objective of this test specification is to provide a basis for approval tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturer's DECT equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [7], ISO/IEC 9646-2 [8], ISO/IEC 9646-3 [9] and ISO/IEC 9646-5 [10]) as well as the ETSI rules for conformance testing (ETS 300 406 [6] and ETR 141 [13]) are used as basis for the test methodology. Test specifications for t

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Test Case Library (TCL); Part 5: Abstract Test Suite (ATS) -Data Link Control (DLC) layer

DS/EN 300497-7 V0.3.0:2000 数字增强型无绳电信（DECT）；通用接口（CI）；测试用例库（TCL）；第7部分：网络（NWK）层的抽象测试套件（ATS） 便携式无线电终端（PT）

The present document contains the Abstract Test Suite (ATS) to test the Network (NWK) layer, Portable radio Termination (PT). The objective of this test specification is to provide a basis for approval tests for DECT equipment giving a high probability of air interface inter-operability between different manufacturer's DECT equipment. This test specification contains the Abstract Test Suite for testing of the NWK layer at the PT. The ISO standard for the methodology of conformance testing (ISO/IEC 9646 parts 1 to 7 [9] to [15]) as well as the ETSI rules for conformance testing (protocol and profile conformance testing specifications, standardization methodo

Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Test Case Library (TCL); Part 7: Abstract Test Suite (ATS) for Network (NWK) layer -Portable radio Termination (PT)

DS/EN 301371-3 V0.0.3:2000 数字增强型无绳电信（DECT）；无绳终端移动性（CTM）； CTM 访问配置文件（CAP）；配置文件测试规范（PTS）；第3部分：配置文件特定测试规范（PSTS） 固定无线电终端（FT）

The present document contains the test specification for Digital Enhanced Cordless Telecommunications (DECT) CTM Access Profile (CAP) Fixed Part (FP) applications. The main objective of the CAP test specification is to provide approval tests giving a high probability of air interface inter-operability between different manufacturer's equipment in different environments (i.e. public, business and residential). The ISO standard for the methodology of conformance testing ISO/IEC 9646 Parts 1 [24] to 7 [30] is used as the basis for the test methodology, and as the basis for the test case specification. This is considered to be unsuitable for Physical layer test

Digital Enhanced Cordless Telecommunications (DECT); Cordless Terminal Mobility (CTM); CTM Access Profile (CAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) -Fixed radio Termination (FT)

DIN EN 300497-4:2000 数字增强无线远程通信(DECT).通用接口(CI).试验实例库(TCL).第4部分:试验序列结构(TSS)和试验目的(TP);数据链接控制(DLC)层(英文版本核准本 EN 300497-4 V 0.3.0 (1999-10) 作为德国标准)

The document contains the Test Suite Structure (TSS) und Test Purposes (TP) to test the DECT Data Link Control (DLC) layer.

Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI); Test Case Library (TCL) - Part 4: Test Suite Structure (TSS) and Test Purposes (TP); Data Link Control (DLC) layer (Endorsement of the English version EN 300497-4 V 0.3.0 (1999-1

DIN EN 300497-1:2000 数字增强无线远程通信(DECT).通用接口(CI).试验实例库(TCL).第1部分:试验序列结构(TTS)和媒介存取控制(MAC)层的试验目的(TP)(英文版本核准本 EN 300497-1 V 0.3.2 (1999-09) 作为德国标准)

The document contains the Test Suite Structure (TSS) und Test Purposes (TP) to test the DECT Medium Access Control (MAC) layer.

Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI); Test Case Library (TCL) - Part 1: Test Suite Structure (TSS) and Test Purposes (TP) for Medium Access Control (MAC) layer (Endorsement of the English version EN 300497-1 V 0.3.2