33.100.01 电磁兼容性综合 标准查询与下载
共找到 698 条与 电磁兼容性综合 相关的标准，共 47 页
Applies to the emission of disturbances due to voltage fluctuations and flicker. Applicable to electrical and electronic equipment intended to be connected to a public low-voltage a.c. distribution system.
Electromagnetic compatibility (EMC) Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
- ICS
- 33.100.01
- CCS
- L06
- 发布
- 2009-09-23
- 实施
Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods (IEC 61000-4-30:2008); German version EN 61000-4-30:2009
- ICS
- 33.100.01
- CCS
- L06
- 发布
- 2009-09
- 实施
- 2009-09-01
Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Conducted disturbance measurements
- ICS
- 33.100.01
- CCS
- L86
- 发布
- 2009-07-31
- 实施
- 2009-07-31
本标准规定了基于公用电信网的宽带客户网络设备及其辅助设备的电磁兼容性(EMC)限值、性能判据和测量方法等。 本标准适用于基于公用电信网的宽带客户网络设备(网关、适配设备及网络终端设备)及其辅助设备。如无特别说明，本标准中出现的宽带客户网络均指基于公用电信网的宽带客户网络，电信网络均指公用电信网络。
Requirements and Measuring Methods of Electromagnetic Compatibility for Broadband Customer Network Equipment and Auxiliary Equipment based on Telecommunication Network
- ICS
- 33.100.01
- CCS
- M30
- 发布
- 2009-06-15
- 实施
- 2009-09-01
本标准规定了移动通信用50Ω射频同轴连接器的产品分类、要求、试验方法、检验规则以及包装、运输和贮存。 本标准适用于移动通信天馈系统射频同轴电缆连接用7/16和N型两大类50Ω射频同轴连接器，其主要工作频率范围为5MHz～3000MHz。
50Ω Radio Frequency Coaxial Connectors for Mobile Communication
- ICS
- 33.100.01
- CCS
- M42
- 发布
- 2009-06-15
- 实施
- 2009-09-01
Establishes a methodology for the achievement of functional safety only with regard to the electromagnetic phenomena of electrical and electronic systems and installations, as installed and used under operational conditions. This methodology includes the
Electromagnetic compatibility (EMC) Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
- ICS
- 33.100.01
- CCS
- L06
- 发布
- 2009-05-08
- 实施
Gives limits that are designed to provide protection for broadcast receivers in the frequency range of 30 MHz to 1 000 MHz when used in the residential environment.
Vehicles, boats, and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
- ICS
- 33.100.01
- CCS
- L06
- 发布
- 2009-05-08
- 实施
Specification for radio disturbance and immunity measuring apparatus and methods -Part 2-1 : methods of measurement of disturbances and immunity - Conducted disturbance measurements.
- ICS
- 33.100.01
- CCS
- L06
- 发布
- 2009-05-01
- 实施
- 2009-05-15
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land Mobile Service - Radio equipment using integral antennas intended primarily for analogue speech - Part 2: Harmonized EN covering the essential requirements under article 3.2 of the R&TT
- ICS
- 33.100.01
- CCS
- L06
- 发布
- 2009-05
- 实施
This part of IEC 61000-4 defines the methods for measurement and interpretation of results for power quality parameters in 50/60 Hz a.c. power supply systems. Measurement methods are described for each relevant parameter in terms that give reliable and repeatable results, regardless of the method’s implementation. This standard addresses measurement methods for in situ measurements. Measurement of parameters covered by this standard is limited to voltage phenomena that can be conducted in a power system. The power quality parameters considered in this standard are power frequency, magnitude of the supply voltage, flicker, supply voltage dips and swells, voltage interruptions, transient voltages, supply voltage unbalance, voltage harmonics and interharmonics, mains signalling on the supply voltage and rapid voltage changes. Depending on the purpose of the measurement, all or a subset of the phenomena on this list may be measured. NOTE 1 Information about current parameters may be found in A.3 and A.5. This standard gives measurement methods and appropriate performance requirements, but does not set thresholds. The effects of transducers inserted between the power system and the instrument are acknowledged but not addressed in detail in this standard. Precautions on installing monitors on live circuits are addressed. NOTE 2 Some guidance about effects of transducers may be found in IEC 61557-12.
Electromagnetic compatability (EMC) — Part 4-30: Testing and measurement techniques — Power quality measurement methods
- ICS
- 33.100.01
- CCS
- L06
- 发布
- 2009-04-30
- 实施
- 2009-04-30
Electromagnetic compatibility (EMC) - General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
- ICS
- 33.100.01
- CCS
- L06
- 发布
- 2009-04-30
- 实施
- 2009-04-30
Electromagnetic compatibility (EMC). General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
- ICS
- 33.100.01
- CCS
- 发布
- 2009-04-30
- 实施
- 2009-04-30
Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers
- ICS
- 33.100.01
- CCS
- 发布
- 2009-03-31
- 实施
- 2009-03-31
This part of CISPR 16-4 specifies a method to enable product committees to develop limits foralternative test methods, using conversions from established limits. This method is generallyapplicable for all kinds of disturbance measurements, but focuses on radiated disturbancemeasurements (i.e. field strength), for which several alternative methods are presentlyspecified. These limits development methods are intended for use by product committees andother groups responsible for defining emissions limits in situations where it is decided to usealternative test methods and the associated limits in product standards.
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods
- ICS
- 33.100.01
- CCS
- 发布
- 2009-02-09
- 实施
- 2009-02-09
This part of IEC 61000 establishes a methodology for the achievement of functional safety only with regard to electromagnetic phenomena of electrical and electronic systems and installations, as installed and used under operational conditions. This methodology includes the implication it has on equipment used in such systems and installations.
Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
- ICS
- 33.100.01
- CCS
- 发布
- 2009-02-09
- 实施
- 2009-02-09
IEC/TS 61000-3-5, Ed. 2: Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
- ICS
- 33.100.01
- CCS
- L06
- 发布
- 2009-02
- 实施
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2 : immunity - Product family standard.
- ICS
- 33.100.01
- CCS
- L06
- 发布
- 2009-01-01
- 实施
- 2009-01-17
Electromagnetic compatibility of technical equipment. Resistibility of telecommunication equipment to ovorvoltages and overcurrents. General technical requirements
- ICS
- 33.100.01
- CCS
- 发布
- 2009
- 实施
- 2010-12-01
Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 17. Specific requirements for 2,4 GHz wideband transmission systems, 5 GHz high performance RLAN equipment and 5,8 GHz broadband data transmitting systems
- ICS
- 33.100.01
- CCS
- 发布
- 2009
- 实施
- 2010-01-01
Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 25. Specific requirements for CDMA 1x spread spectrum mobile stations and ancillary equipment
- ICS
- 33.100.01
- CCS
- L06
- 发布
- 2009
- 实施
- 2010-01-01
