33.120.20 导线和对称电缆 标准查询与下载

LST EN 61935-3-2010 平衡和同轴信息技术布线测试 第3部分：EN 50173-4 和相关标准（IEC 61935-3:2008，已修改）中指定的已安装布线

Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and related standards (IEC 61935-3:2008, modified)

LST EN 61935-2-20-2010 符合 EN 50173 系列的平衡通信布线测试 第 2-20 部分：跳线和工作区线 D 类应用的空白详细规范（IEC 61935-2-20:2008，已修改）

Testing of balanced communication cabling in accordance with series EN 50173 - Part 2-20: Patch cords and work area cords - Blank detail specification for class D applications (IEC 61935-2-20:2008, modified)

DS/IEC 61156-5-1:2010 数字通信用多芯和对称对/四芯电缆 第 5-1 部分：传输特性高达 1 000 MHz 的对称对/四芯电缆 水平地板布线 空白详细规范

This part of IEC 61156 describes symmetrical pair/quad cables intended primarily for horizontalfloor cabling as defined in ISO/IEC 11801 and ISO/IEC 24702.NOTE Environmental classifications are presented in ISO/IEC 24702 with three levels of severity in four areas: mechanical, ingress, climatic, and electromagnetic; thus, in tabular form, they are referred to as the “MICE table”.This blank detail specification includes additional recommended environmental characteristics andseverities which are derived from the environmental classifications that are specified for cabling forvarious environments.The blank detail specification determines the layout and style

Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Blank detail specification

IEC 61156-6:2010 数字通信用对绞或星绞多芯对称电缆.第6部分:传输特性小于1000MHz的对绞或星绞对称电缆.工作区域布线.分规范

This part of IEC 61156 makes reference to IEC 61156-1. The cables described herein are intended primarily for work area wiring as defined in ISO/IEC 11801 and ISO/IEC 24702. It covers individually screened@ common screened and unscreened pairs or quads. The transmission characteristics and the frequency range (see Table 1) of the cables are specified at 20 ?? These cables can be used for various communication channels which use as many as four pairs simultaneously. In this sense@ this sectional specification provides the cable characteristics required by system developers to evaluate new systems. The cables covered by this standard are intended to operate with voltages and currents normally encountered in communication systems. These cables are not intended to be used in conjunction with low impedance sources@ for example the electric power supplies of public utility mains@ they are intended to be used to support the delivery of low voltage and power applications such as IEEE's 802.3af (Power over Ethernet) and 802.3at (Power over Ethernet Plus).

Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1000 MHz - Work area wiring - Sectional specification

ANSI/UL 444-2010 通信电缆标准

1. Silver Plated Steel Conductors; 2. Size Determination of Copper Clad Conductors; 3. Air-gap Coax Acceptability; 4. Requirements for Metallic Messengers; 5. Dielectric Testing on Communication Cables; 6. Editorial Corrections; 7. Clarification of Size Requirements of Copper-clad Aluminum Conductor; 8. Application or Requirements in 5.1.2.

Standard for Communications Cables

ANSI/UL 444a-2010 通信电缆标准

Standard for Communications Cables

ANSI/UL 444b-2010 通信电缆标准

Standard for Communications Cables

ANSI/SCTE 34-2010 铁芯深度验证的试验方法

The purpose of this test method is to determine the cored depth of semiflex aluminum sheath cable. The core depth is the internal measured distance between the dielectric foam and the square-cut end of the outer aluminum sheath. This test method will define the suggested method for core depth measurement.

Test Method for Cored Depth Verification

EN 61935-3:2009 平衡和同轴信息技术布线测试 第3部分：EN 50173-4 和相关标准中规定的已安装布线

IEC 61935-3:2008 specifies conformance testing for home cabling. These conformance tests include visual inspection, verification testing and either qualification testing or certification testing. Documentation for the test results are also specified.

Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and related standards

EN 61935-2-20:2009 符合 EN 50173 系列的平衡通信电缆测试 第 2-20 部分：跳线和工作区线 D 类应用的空白详细规范

IEC 61935-2-20:2008(E) describes work area cord for class D applications, as defined in ISO/IEC 11801 as well as in the ISO/IEC 24702. It determines the layout and style for detail specifications describing cords with transmission characteristics up to 100 MHz for digital communications. Detail specifications, based on this blank detail specification, may be prepared by a national organization, a manufacturer, or a user. It cancels and replaces the ISO/IEC PAS 61935-2-20 published in 2007. It constitutes a technical revision.

Testing of balanced communication cabling in accordance with series EN 50173 - Part 2-20: Patch cords and work area cords - Blank detail specification for class D applications

DIN VDE 0816-1 Bb.1:2009 电信和数据处理系统的外部电缆.聚乙烯绝缘和护套及单元式绞合电缆.电信电缆类型命名清单

External cables for telecommunication and data processing systems - Cables insulated and sheathed with polyethylen, unit stranded - List of type designation for telecommunication cables

SANS 61156-1:2009 数字通信用对绞或星绞多芯对称电缆．第1部分：总规范

Applicable to communication systems such as ISDN, local area networks and data communication systems and specifies the definitions, requirements and test methods of multicore, symmetrical pair and quad cables. Also applicable to cables used for customer

Multicore and symmetrical pair/quad cables for digital communications Part 1: Generic specification

DS/IEC 61156-6-1:2009 数字通信用多芯和对称对/四芯电缆 第 6-1 部分：传输特性高达 1 000 MHz 的对称对/四芯电缆 工作区布线 空白详细规范

This part of IEC 61156 describes symmetrical pair/quad cables intended primarily for work area cabling as defined in ISO/IEC 11801 and ISO/IEC 24702.NOTE Environmental classifications are presented in ISO/IEC 24702 with three levels of severity in four areas:mechanical, ingress, climatic, and electromagnetic: thus, in tabular form, they are referred to as the “MICE table”.This blank detail specification includes recommended environmental characteristics and severities which are derived from the environmental classifications that are specified for cabling for various environments.The blank detail specification determines the layout and style for detail speci

Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Blank detail specification

IEC 61156-1:2007+AMD1:2009 CSV 数字通信用多芯对称对绞/四芯电缆第1部分:总规范

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

DS/IEC 61156-1/Amd.1:2009 数字通信用多芯和对称对/四芯电缆 第1部分：通用规范

This part of IEC 61156 is applicable to communication systems such as ISDN, local area networks and data communication systems and specifies the definitions, requirements and test methods of multicore, symmetrical pair and quad cables.This standard is also applicable to cables used for customer premises wiring.

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

IEC 61156-1:2009 数字通信用双芯和对称两股/四股电缆.第1部分:一般规范

Multicore and symmetrical pair/quad cables for digital communication - Part 1: Generic specification

IEC 61156-5-1:2009 数字通信用对绞或星绞多芯对称电缆.第5-1部分:传输特性＜1000MHz的星绞多芯对称电缆.水平层布线.空白详细规范.

"This part of IEC 61156 describes symmetrical pair/quad cables intended primarily for horizontal floor cabling as defined in ISO/IEC 11801 and ISO/IEC 24702. NOTE Environmental classifications are presented in ISO/IEC 24702 with three levels of severity in four areas: mechanical@ ingress@ climatic@ and electromagnetic; thus@ in tabular form@ they are referred to as the ""MICE table"". This blank detail specification includes additional recommended environmental characteristics and severities which are derived from the environmental classifications that are specified for cabling for various environments. The blank detail specification determines the layout and style for detail specifications describing symmetrical pair/quad cables for digital communications. Detail specifications@ based on the blank detail specification@ may be prepared by a national organization@ a manufacturer or a user."

Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1000 MHz - Horizontal floor wiring - Blank detail specification

IEC 61156-6-1:2009 数字通信用对绞或星绞多芯对称电缆.第6-1部分:传输特性＜1000MHz的星绞多芯对称电缆.工作区布线.空白详细规范

"This part of IEC 61156 describes symmetrical pair/quad cables intended primarily for work area cabling as defined in ISO/IEC 11801 and ISO/IEC 24702. NOTE Environmental classifications are presented in ISO/IEC 24702 with three levels of severity in four areas: mechanical@ ingress@ climatic@ and electromagnetic: thus@ in tabular form@ they are referred to as the ""MICE table"". This blank detail specification includes recommended environmental characteristics and severities which are derived from the environmental classifications that are specified for cabling for various environments. The blank detail specification determines the layout and style for detail specifications describing symmetrical pair/quad cables with transmission characteristics up to the maximum frequency of the respective category for digital communications. Detail specifications@ based on the blank detail specification@ may be prepared by a national organization@ a manufacturer or a user."

Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 1000 MHz - Working area wiring - Blank detail specification

IEC 61156-1:2007/AMD1:2009 数字通信用双芯和对称两股/四股电缆.第1部分:一般规范.修改件1

This part of IEC 61156 is a guide to indoor cables which specifies the definitions and requirements of multicore@ symmetrical pair and quad cables used in digital communication systems such as ISDN@ local area networks and data communication systems.?

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification; Amendment 1

DS/IEC 61156-4-1:2009 数字通信用多芯和对称对/四芯电缆 第 4-1 部分：直立电缆 空白详细规范

This blank detail specification relates to multicore and symmetrical pair/quad cables for digitalcommunications in riser application.This blank detail specification determines the layout and style for detail specifications describing multicore and symmetrical pair(s)/quad(s) cables for digital communication in riser wiring. Detail specifications based on the blank detail specification may be prepared by a national standards organization, a manufacturer or a user.

Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables - Blank detail specification