33.120.20 导线和对称电缆 标准查询与下载

UL 444 BULLETINS-2005

1 This standard applies to 60-250°C single- or multiple-conductor jacketed or unjacketed, integral or nonintegral cables and single or multiple coaxial cables for telephone and other communication circuits such as voice, data, and audio for on-premise customer systems. These cables ale not prohibited from containing one or more optical fibre members. For the purpose of this standard, a coaxial cable or coaxial member conductor is a single conductor with a shield. For the purpose of this standard, a single- or multiple-conductor unjacketed cable is a cross-connect wire. 2 This standard applies to communications cables that are intended primarily for installation in accordance with Section 60 of the Canadian Electrical Code (CEC), Part 1, and Article 800 of the National Electrical Code (NEC) . They are rated for 300 V applications but are not so marked.

01/07/2005 (6p)

CSN EN 50288-4-1 ZZ1-2004 多铜电缆的模拟和数字通信和管理4-1部分：分规范屏蔽电缆至600兆赫-水平和主干电缆，光缆建设

Zpracovatel: Technick? a zku?ební ústav telekomunikací a po?t Praha - TESTCOM, I? 00003468, Ing. Jaroslav Adam Technická normaliza?ní komise: TNK 68 Kabely a vodi?e Pracovník ?eského normaliza?ního institutu: Viera Boro?ová

Multi-Copper Cables for Analog and Digital Communications and Management Part 4-1: Sub-Specification for Shielded Cables to 600 MHz - Horizontal and Trunk Cables, Optical Cable Construction

CSN EN 50288-2-2 ZZ1-2004 多铜电缆的模拟和数字通信和管理．部分2-2：小组规格屏蔽电缆多达100兆赫．电缆和布线工作

Zpracovatel: Technick? a zku?ební ústav telekomunikací a po?t Praha - TESTCOM, I? 00003468, Ing. Jaroslav Adam Technická normaliza?ní komise: TNK 68 Kabely a vodi?e Pracovník ?eského normaliza?ního institutu: Viera Boro?ová

Analog and digital communications and management of multi-copper cables. Part 2-2: Panel size shielded cable up to 100 MHz. Cable and wiring work

IEEE 400.2-2004 使用超低频(VLF)的屏蔽电力电缆系统的现场试验指南

Describes very low frequency withstand and diagnostic tests and measurements that are performed in the field on shielded medium voltage cables with extruded and laminated dielectric insulation.

Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)

BS EN 50406-2:2004 高比特率电信网络用端用户多组电缆.管道和地下电缆

This European Standard defines outdoor multi-pair/quad cables for use in high bit rate telecommunication networks with their relative definitions and requirements. It covers radially water blocked cables, with an overall screen, with performances up to 60 MHz, to be used in outdoor networks intended to connect the broadband outside plant to the individual customer premises with a maximum recommended length of connection of 1 km. The electrical, environmental, mechanical and transmission performance characteristics of the cables, related to their reference test methods, are detailed.

End user multi-pair cables used in high bit rate telecommunication networks - Duct and buried cables

BS EN 50407-1:2004 高比特率数字存取电信网络用多组电缆.室外电缆

This European Standard defines outdoor multi-pair cables for use in high bit rate digital telecommunication networks with their relative definitions and requirements. It covers water tight cables, with an overall screen, for applications up to 10 MHz, to be used in outdoor networks (for example in the subscriber access loop). The electrical, mechanical, transmission performance characteristics of the screened cables, related to their reference test methods, are detailed.

Multi-pair cables used in high bit rate digital access telecommunication networks. Outdoor cables

BS EN 50406-1:2004 高比特率电信网络用端用户多组电缆.架空电缆

This European Standard defines outdoor multi-pair/quad cables for use in high bit rate telecommunication networks with their relative definitions and requirements. It covers radially water blocked cables, with an overall screen, with performances up to 60 MHz, to be used in outdoor networks intended to connect the broadband outside plant to the individual customer premises with a maximum recommended length of connection of 1 km. The electrical, environmental, mechanical and transmission performance characteristics of the cables, related to their reference test methods, are detailed.

End user multi-pair cables used in high bit rate telecommunication networks. Aerial cables

DS/EN 50289-1-14:2004 通信电缆 测试方法规范 第 1-14 部分：电气测试方法 连接硬件的耦合衰减或屏蔽衰减

This Part 1-14 of EN 50289 details the method of test to determine the coupling attenuation or screening attenuation for connecting hardware used in analogue and digital communication systems. The test method details means to test one part of a connecting hardware (e. g. wall outlet or plug alone) as well as testing a mated pair of connecting hardware. It is to be read in conjunction with EN 50289-1-6.

Communication cables - Specifications for test methods - Part 1-14: Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware

LST EN 50288-3-1-2004 用于模拟和数字通信和控制的多元件金属电缆 第 3-1 部分：频率高达 100 MHz 的未屏蔽电缆的分规范 水平和建筑骨干电缆

Multi-element metallic cables used in analogue and digital communication and control. Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz. Horizontal and building backbone cables

LST EN 50288-1-2004 用于模拟和数字通信和控制的多元件金属电缆 第1部分：通用规范

Multi-element metallic cables used in analogue and digital communication and control. Part 1: Generic specification

LST EN 50288-4-2-2004 用于模拟和数字通信和控制的多元件金属电缆 第 4-2 部分：频率高达 600 MHz 的屏蔽电缆分规范 工作区和跳线电缆

Multi-element metallic cables used in analogue and digital communication and control. Part 4-2: Sectional specification for screened cables characterised up to 600 MHz. Work area and patch cord cables

LST EN 50288-2-2-2004 用于模拟和数字通信和控制的多元件金属电缆 第 2-2 部分：频率高达 100 MHz 的屏蔽电缆的分规范 工作区和跳线电缆

Multi-element metallic cables used in analogue and digital communication and control. Part 2-2: Sectional specification for screened cables characterised up to 100 MHz. Work area and patch cord cables

LST EN 50288-2-1-2004 用于模拟和数字通信和控制的多元件金属电缆 第 2-1 部分：频率高达 100 MHz 的屏蔽电缆的分规范 水平和建筑骨干电缆

Multi-element metallic cables used in analogue and digital communication and control. Part 2-1: Sectional specification for screened cables characterised up to 100 MHz. Horizontal and building backbone cables

LST EN 50288-3-2-2004 用于模拟和数字通信和控制的多元件金属电缆 第 3-2 部分：频率高达 100 MHz 的未屏蔽电缆的分规范 工作区和跳线电缆

Multi-element metallic cables used in analogue and digital communication and control. Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz. Work area and patch cord cables

LST EN 50288-4-1-2004 用于模拟和数字通信和控制的多元件金属电缆 第 4-1 部分：频率高达 600 MHz 的屏蔽电缆的分规范 水平和建筑骨干电缆

Multi-element metallic cables used in analogue and digital communication and control. Part 4-1: Sectional specification for screened cables characterised up to 600 MHz. Horizontal and building backbone cables

NF C93-542-2-1:2004 用于模拟与数字通信和控制的多元件金属电缆.第2-1部分:100MHz及以下屏蔽电缆分规范.水平的和建筑物主干电缆

Multi-element metallic cables used in analogue and digital communication and control - Part 2-1 : sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables.

NF C93-542-3-1:2004 用于模拟与数字通信和控制的多元件金属电缆.第3-1部分:100MHz及以下非屏蔽电缆分规范.水平的和建筑物主干电缆

Multi-element metallic cables used in analogue and digital communication and control - Part 3-1 : sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables.

NF C93-542-1:2004 用于模拟与数字通信和控制的多元件金属电缆.第1部分:一般规范

Multi-element metallic cables used in analogue and digital communication and control - Part 1 : generic specification.

NF C93-542-2-2:2004 用于模拟与数字通信和控制的多元件金属电缆.第2-2部分:100MHz及以下屏蔽电缆分规范.工作区域和临时线路软线电缆

Multi-element metallic cables used in analogue and digital communication and control - Part 2-2 : sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables.

NF C93-542-3-2:2004 用于模拟与数字通信和控制的多元件金属电缆.第3-2部分:100MHz及以下非屏蔽电缆分规范.工作区域和临时线路软线电缆

Multi-element metallic cables used in analogue and digital communication and control - Part 3-2 : sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables.