共找到 508 条与 导线和对称电缆 相关的标准,共 34 页
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification (Remains Current)
Polyolefin insulated outdoor twisted pair cables for digital communications Part 1: General provisions
Hybrid telecommunication cables - Part 1: Generic specification
Communication cables. Specifications for test methods. Electrical test methods. Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL)
Communication cables. Specifications for test methods. Electrical test methods. Attenuation
Communication cables. Specifications for test methods. Electrical test methods. General requirements
What is BS EN 50289-1-8 – Attenuation of communication cables about? BS EN 50289-1-8 is a part of the BS EN 50289 multi-series that discusses communication cables. BS EN 50289-1-8 details the test methods to determine the attenuation of finished cables used in analogue and digital communication systems. BS EN 50289-1-8 is bound to be read in conjunction with BS EN 50289-1-1 , which contains essential provisions for its application.
Communication cables. Specifications for test methods. Electrical test methods. Attenuation
Communication cables - Specifications for test methods - Part 1- 1: Electrical test methods - General requirements
Communication cables - Specifications for test methods - Part 1- 8: Electrical test methods - Attenuation
Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL)
Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance@ input impedance@ return loss
Multicore and symmetrical pair/quad cables for digital communications. Nominal DC-resistance values of floor-wiring and work-area cables for digital communications
This part of IEC 61156@ which is a Technical Report@ provides informative values for DCresistance of typical installed cables at the time of publication to enable further analysis of cable performance mainly influenced by DC-resistance@ such as thermal heating
Multicore and symmetrical pair/quad cables for digital communications - Part 1-6: Nominal DC-resistance values of floor-wiring and work-area cables for digital communications
Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath; Corrigendum 1
Electromagnetic compatibility performance requirements and measurement methods for cellular mobile communications equipment Part 4: Multimode terminals and their auxiliary equipment
Multicore and symmetrical pair/quad cables for digital communications. Cables for cords with transmission characteristics up to 2 GHz. Sectional specification
Multicore and symmetrical pair/quad cables for digital communications. Cables for channels with transmission characteristics up to 2 GHz. Sectional specification
This part of IEC 61156 describes cables primarily intended for work area cords as defined in ISO/IEC 11801 and in ISO/IEC TR 11801-9901 which is planned to be included in the next edition of ISO/IEC 11801-1. It covers overall screened cables with screened (X/FTP) or unscreened (X/UTP) pairs@ where X stands for F@ S or SF@ as well as pair-screened cables without overall screen (U/FTP). The transmission characteristics of these cables are specified up to a frequency of 2 000 MHz and at a temperature of 20 ?? Two categories of cables are recognised: Category 8.1 for use in Class I according to ISO/IEC TR 11801-9901; Category 8.2 for use in Class II according to ISO/IEC TR 11801-9901. These cables can be used for various communication channels which use as many as four pairs simultaneously. The cables covered by this International Standard are intended to operate with voltages and currents normally encountered in communication systems. While these cables are not intended to be used in conjunction with low impedance sources@ e.g. the electric power supplies of public utility mains@ they are intended to be used to support the delivery of low voltage remote powering applications such as IEEE 802.3af (Power over Ethernet) or further developments e.g. according to IEEE 802.3at or IEEE 802.3bt. More information on the capacity to support these applications according to the installation practices are given in IEC PAS 61156-1-4@ IEC TR 61156-1-6 and ISO/IEC TR 29125.
Multicore and symmetrical pair/quad cables for digital communications - Part 10: Cables for cords with transmission characteristics up to 2 GHz - Sectional specification
Multicore and symmetrical pair/quad cables for digital communications Part 1:Generic specification
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号