共找到 804 条与 音频、视频和视听系统综合 相关的标准,共 54 页
本部分规定了音像制品中數字視頻光盤 (VCD) 的质量技术要求,为其相关的评价和检测提供依据。 本部分适用于数字视频光盘 (VCD) ,超级VCD光盘制品也可参照使用。
Quality and technical requirements for audio and video products Part 4: Digital video compact discs (VCD)
本部分规定了音像制品盒式音带的质量技术要求 ,为其相关的评价和检测提供依据。 本部分适用于盒式音帶制品。
Quality and technical requirements for audio and video products Part 1: Audio cassette
本部分规定了音像制品中 VHS 像带的质量技术要求,为其相关的评价和检测提供依据。 本部分适用于 VHS 像带制品。
Quality and technical requirements for audio and video products Part 3: VHS video tapes
Quality and technical requirements for audio and video products Part 5: Multi-purpose digital video compact discs (DVD-Video)
This part of IEC 62379 specifies a control interface for products which convey audio and/or video across digital networks.Separate documents specify items specific to a particular type of traffic, a particular networking technology, or a particular class of application.
Common control interface for networked digital audio and video products - Part 1: General
This part of 62312 gives guidelines for methods of synchronization of audio and video. This Technical Specification describes general measurement methods for the synchronization of audio and video equipment.
Guideline for synchronization of audio and video - Part 1-1: Measurement methods for synchronization of audio and video equipment and systems - General
Common control interface for networked digital audio and video products - Part 1: General (IEC 62379-1:2007); German version EN 62379-1:2007
This European Standard describes: . the system physical structure; . the system control signals, which implement an extension of the DiSEqC set of commands described in the .DiSEqC. Bus Functional Specifications Version 4.2, February 25, 1998; . the definition of identified configurations; . management of the potential collisions in the control signals traffic. Figure 1 illustrates the physical system configuration considered in this European Standard. Several satellite signal demodulators can receive signals from any of the input signalbanks of the LNB or the switch; the signals selected by the demodulators (or receivers) are transported via a single cable
Satellite signal distribution over a single coaxial cable in single dwelling installations
The IEC 62312 series gives guidelines for methods of synchronization of audio and video.This part of IEC 62312 describes the system model and general methods for the synchronization of audio and video. The methods exclude the synchronization of the signal source and the spatial delay of audio reproduction.
Guideline for synchronization of audio and video - Part 2: Methods for synchronization of audio and video systems
This International Safety Standard applies to electronic apparatus designed to be fed from the MAINS or from a SUPPLY APPARATUS, from batteries or from REMOTE POWER FEEDING and intended for reception, generation, recording or reproduction respectively of audio, video and associated signals. It also applies to apparatus designed to be used exclusively in combination with the above-mentioned apparatus. This standard primarily concerns apparatus intended for household and similar general use but which may also be used in places of public assembly such as scholls, theatres, places of worship and the workplace. PROFESSIONAL APPARATUS intended for use as describe
Audio, video and similar electronic apparatus - Safety requirements
This part the ABNT NBR 15603 specifies in details the structure for the construction of the basic information related to the SI which is part of the Brazilian terrestrial digital television system (SBTVD).
Digital terrestrial television - Multiplexing and service information (SI)Part 3: Syntaxes and definitions of extension information of SI
Digital terrestrial television - Receivers
The IEC 62312 series gives guidelines for methods of synchronization of audio and video. This part of IEC 62312 describes the system model and general methods for the synchronization of audio and video. The methods exclude the synchronization of the signal source and the spatial delay of audio reproduction.
Guideline for synchronization of audio and video - Methods for synchronization of audio and video systems
Digital audio interface - Part 3: Consumer applications (IEC 60958-3:2006)
本标准规定了基于IP网络的前端监控设备、监控管理平台、监控中心和远程监控客户端、运营支撑平台和通信网络应采用的安全技术,包括用户接入认证和业务认证、数据机密性和完整性、可用性、日志等方面。 本标准适用于远程视频监控系统
Technical Specification for Long Distance Remote Visual Surveillance System Security
本标准规定了中、短波调幅广播发射机的技术要求和测量方法。对于能够确保同样测量不确定度的任何等效测量方法也可以采用。有争议时应以本标准为准。 本标准适用于额定功率在 lkW 以上(含 lkW)的中波和短波调幅广播发射机的生产、验收、运行和维护。
Technical specifications and methods of meansurement for MW and SW broadcasting transmitters
Engineering guidelines for sound reinforcement system in theater and other venues
The IEC 62312 series gives guidelines for methods of synchronization of audio and video. This part of IEC 62312 describes the system model and general methods for the synchronization of audio and video. The methods exclude the synchronization of the signal source and the spatial delay of audio reproduction.
Guideline for synchronization of audio and video - Part 2: Methods for synchronization of audio and video systems
Specifies the Service Information (SI) data which forms a part of Digital Video Broadcasting (DVB) bitstreams, in order that the user can be provided with information to assist in selection of services and/or events within the bitstream.
Digital Video Broadcasting (DVB) - Specification for Service Information (SI) in DVB systems
Specifies the method by which ITU-R System B Teletext, also known as EBU Teletext, may be carried in DVB bitstreams.
Digital Video Broadcasting (DVB); Specification for conveying ITU-R System B Teletext in DVB bitstreams
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号