33.180.20 纤维光学和光学互连器件 标准查询与下载

IEC 62149-5:2020 RLV 纤维光学有源元件和器件.性能标准.第5部分:带LD驱动器和CDR IC的ATM-PON收发器

Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs

IEC 61300-2-56:2020 纤维光学互连器件和无源元件.基本试验和测量程序.第2-56部分:试验.安装外壳的抗风性

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-56: Tests - Wind resistance of mounted housing

IEC 62149-5:2020 光纤有源器件和器件 - 性能标准 - 第5部分:具有Ld驱动器和Cdr IC的Atm-pon收发器

Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs

IEC 62149-3:2020 纤维光学有源元件和器件.性能标准.第3部分:40gbit/s光纤传输系统用调制器集成激光二极管发射器

Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems

IEC 62149-3:2020 RLV 光纤有源元件和器件.性能标准.第3部分:40Gbit/s光纤传输系统用调制器集成激光二极管发射器

Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems

BS EN IEC 61977:2020 光纤互连装置和无源元件 光纤固定滤波器 通用规格

What is BS EN IEC 61977 about?    BS EN IEC 61977 applies to the family of fibre optic filters. These components have the following general features:   They are passive because they contain no optoelectronic or other transducing elements that can process the optical signal launched into the input port   They modify the spectral intensity distribution in order to select some wavelengths and inhibit others   They are fixed, i.e., the modification of the spectral intensity distribution is fixed and cannot be tuned   They have input and output ports or a common port (having both functions of input and output) for the transmission of optical power, the ports are optical fibre or optical fibre connectors

Fibre optic interconnecting devices and passive components. Fibre optic fixed filters. Generic specification

BS EN IEC 62343-3-3:2020 动态模块 性能规范模板 波长选择开关

What is BS EN IEC 62343 ‑ 3 ‑ 3 about?    BS EN IEC 62343 is a series on dynamic modules. BS EN IEC 62343 ‑ 3 ‑ 3 provides a performance specification template for wavelength selective switches (WSS). The object is to provide a framework for the preparation of detailed specifications on the performance of wavelength selective switches.   Additional specification parameters are often included for detailed product specifications or performance specifications if necessary. However, specification parameters specified in BS EN IEC 62343 ‑ 3 ‑ 3 are not removed from the detailed product specifications or performance specifications.   Who is BS EN IEC 62343

Dynamic modules - Performance specification templates. Wavelength selective switches

BS EN IEC 61754-35:2020 光纤互连装置和无源元件 光纤连接器接口 适用于恶劣环境的 LSHE 型连接器系列

What is BS EN IEC 61754 ‑ 35 about?    BS EN IEC 61754 is a series on fibre optic interconnecting devices and passive components. BS EN IEC 61754 ‑ 35 defines the standard connector interface dimensions for the LSHE family of connectors with up to four termini. This connector family is targeting deployment under harsh environmental conditions.   BS EN IEC 61754 ‑ 35 specifies the mechanical connection between the plug connector and the socket which is ensured by a push-pull mechanism.   Who is BS EN IEC 61754 ‑ 35 for?   BS EN IEC 61754 ‑ 35 on fibre optic interconnecting devices is useful for:

Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces - Type LSHE connector family for harsh environments

BS EN IEC 62149-11:2020 光纤有源元件和装置 性能标准 具有多模光纤接口的多通道发射器/接收器芯片级封装

What is BS EN IEC 62149 ‑ 11 about?    BS EN IEC 62149 is a series on fibre optic active components and devices. BS EN IEC 62149 ‑ 11 specifies the performance standards for a multiple channel transmitter/receiver chip-scale package with a multimode fibre interface that operates at up to 28 Gbit/s per channel.   BS EN IEC 62149 ‑ 11 specifies the parameters that apply, with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run as an initial design verification to prove any product's ability to satisfy the performance standard's requirements.   BS EN IEC 62149 ‑ 11 covers the performance standards for photonic chip-scale packages for use with multimode fibre through free space optics or multiple channel optical fibre connectors.   ...

Fibre optic active components and devices. Performance standards - Multiple channel transmitter/receiver chip scale package with multimode fibre interface

BS EN IEC 61300-3-55:2020 光纤互连装置和无源元件 基本测试和测量程序 检查和测量 保偏、无源光学元件的偏振消光比和键控精度

What is BS EN IEC 61300 ‑ 3 ‑ 55 about?    BS EN IEC 61300 is a series that discusses fibre optic interconnecting devices and passive components. BS EN IEC 61300 ‑ 3 ‑ 55 provides methods for measuring the polarization extinction ratio (PER) of single-mode, polarization-maintaining (PM) optical components based upon PM fibres.   BS EN IEC 61300 ‑ 3 ‑ 55 also provides methods for detecting the input and output orientation of the PM components' principal axes as well as methods for estimating the keying accuracy, i.e., the angular misalignment between the principal axes and the mechanical reference guide key of the connectors, if these are present.   Who is BS EN IEC 61300 ‑ 3 ‑

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Examinations and measurements. Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components

EN IEC 61300-3-55:2020 光纤互连设备和无源元件 基本测试和测量程序 第 3-55 部分：检查和测量 偏振保持、无源、光学元件的偏振消光比和键控精度

IEC 61300-3-55: 2020 provides methods for measuring the polarisation extinction ratio (PER) of single-mode, polarisation maintaining (PM) optical components based upon PM fibres. This document also provides methods for detecting the input and output orientation of the PM components' principal axes as well as methods for estimating the keying accuracy, i.e. the angular misalignment between the principal axes and the mechanical reference guide key of the connectors, if these are present.

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55:Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components

IEC 61753-1:2018/AMD1:2020 修改件1.光纤互连器件和无源元件.性能标准.第1部分:总则和指南

Amendment 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance

IEC 61753-1:2018+AMD1:2020 CSV 修改件1.光纤互连器件和无源元件.性能标准.第1部分:总则和指南

Amendment 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance

EN IEC 62149-11:2020 光纤有源元件和设备 性能标准 第11部分：具有多模光纤接口的多通道发射器/接收器芯片级封装

IEC 62149-11: 2020 specifies the performance standards for a multiple channel transmitter/receiver chip scale package (CSP) with multimode fibre interface that operates at up to 28 Gbit/s per channel. It specifies the parameters that apply, with clearly defined conditions, severities, and pass/fail criteria. The tests are intended to be run as an initial design verification to prove any product's ability to satisfy the performance standard's requirements. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard, but is then controlled by a quality assurance/quality conformance program.

Fibre optic active components and devices - Performance standards - Part 11: Multiple channel transmitter/receiver chip scale package with multimode fibre interface

EN IEC 62343-3-3:2020 动态模块 第 3-3 部分：性能规范模板 波长选择开关

IEC 62343-3-3:2020 is available as IEC 62343-3-3:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62343-3-3:2020 provides a performance specification template for wavelength selective switches. The object is to provide a framework for the preparation of detail specifications on the performance of wavelength selective switches. Additional specification parameters are often included for detailed product specifications or performance specifications if necessary. However, specification parameters specified in this document are not removed from the detail product specifications or performance specifications. The technical information regarding wavelength selective switches and their applications in DWDM systems with single-mode fibres are described in IEC TR 62343-6-4. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - modification of the normative references; - modification of the terms and definitions.

Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches

EN IEC 61977:2020 光纤互连装置和无源元件 光纤固定滤波器 通用规范

IEC 61977:2020 is available as IEC 61977:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61977:2020 applies to the family of fibre optic filters. These components have all of the following general features: - they are passive for the reason that they contain no optoelectronic or other transducing elements which can process the optical signal launched into the input port; - they modify the spectral intensity distribution in order to select some wavelengths and inhibit others; - they are fixed, i.e. the modification of the spectral intensity distribution is fixed and cannot be tuned; - they have input and output ports or a common port (having both functions of input and output) for the transmission of optical power; the ports are optical fibre or optical fibre connectors; - they differ according to their characteristics. They can be divided into the following categories: - short-wave pass (only wavelengths lower than or equal to a specified value are passed); - long-wave pass (only wavelengths greater than or equal to a specified value are passed); - band-pass (only an optical window is allowed); - notch (only an optical window is inhibited); - gain flattening (compensating the spectral profile of the device). It is also possible to have a combination of the above categories. This document provides the generic information including terminology of IEC 61753-04x series documents. Published IEC 61753-04x series documents are listed in the Bibliography. This document establishes uniform requirements for optical, mechanical and environmental properties. This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - change of the title and the scope for the limitation to fibre optic fixed filters; - addition of new terms and definitions reflecting new title; - removal of terms and definitions duplicated in IEC TS 62627-09; - harmonization of the vertical axis of Figures 1 to 5; - restructuration of Clause 4 reflecting the latest technical and market situation.

Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic specification

EN IEC 61754-35:2020 光纤互连设备和无源元件 光纤连接器接口 第35部分：适用于恶劣环境的 LSHE 型连接器系列

IEC 61754-35: 2020 defines the standard connector interface dimensions for LSHE family of connectors with up to four termini. This connector family is targeting deployment under harsh environmental conditions.

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 35: Type LSHE connector family for harsh environments

IEC 61300-3-55:2020 光纤互连器件和无源元件基本试验和测量程序第3-55部分:检查和测量无源光学元件的偏振保持消光比和键控精度

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55:Examinations and measurements - Polarisation extinction ratio and keying accuracy of pola

EN IEC 62148-6:2020 光纤有源元件和设备 封装和接口标准 第6部分：ATM-PON 收发器

IEC 62148-6:2020 is available as IEC 62148-6:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62148-6:2020 covers the physical interface specification of optical transceivers for asynchronous transfer mode-passive optical network (ATM-PON) systems recommended by the International Telecommunication Union (ITU) as ITU Recommendation G.983.1. This second edition cancels and replaces the first edition published in 2003, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - inconsistency of types in Clause 4 has been resolved; - part and titles list in the Foreword has been deleted; - references have been updated.

Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers

BS EN IEC 61300-2-4:2019+A1:2020 光纤互连装置和无源元件 基本测试和测量程序 测试 光纤或电缆固定

1   Scope The purpose of this part of IEC 61300 is to ensure that the retention or attachment of the fibre, cord or cable in a fibre optic device or an enclosure will withstand tensile loads likely to be applied during normal service.

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Tests. Fibre or cable retention