33.180.20 纤维光学和光学互连器件 标准查询与下载

EN IEC 63032:2018 光纤互连装置和无源元件 光纤可调谐带通滤波器 通用规范

Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification

IEC 62005-9-4:2018 纤维光学互连器件和无源元件. 可靠性. 第9-4部分: C类环境用无源光学元件的高功率合格性

This part of IEC 62005 gives the requirements for the reliability qualification of passive optical components when used in high optical power applications for the environmental category C.

Fibre optic interconnecting devices and passive components - Reliability - Part 9-4: High power qualification of passive optical components for environmental category C

IEC 61755-6-2:2018 纤维光学互连器件和无源元件连接器光学接口第6-2部分:50 m芯径多模物理接触光纤的连接仅使用选定的A1a光纤850 nm波长的非角度参考连接器应用

This part of the IEC 61755 defines the dimensional limits of an optical interface for reference connectors necessary to meet specific requirements for fibre-to-fibre interconnection of nonangled polished multimode reference connectors with cylindrical ferrules intended to be used for attenuation measurements in the field or factory. One grade of reference connector is defined in this document. The reference connector is terminated to selected IEC 60793-2-10:2015 A1a fibre. The geometrical dimensions and tolerances of the specified reference connector have been developed primarily to limit the variation in measured attenuation between multiple sets of two reference connectors@ and therefore to limit the variation in measured attenuation between randomly chosen reference connectors when mated with connectors in the field or factory.

Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 6-2: Connection of 50 μm core diameter multimode physically contacting fibres - Non-angled for referenc

IEC 63032:2018 光纤互连器件和无源元件光纤可调带通滤波器总规范

Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification

BS EN IEC 61754-7-2:2018 光纤互连装置和无源元件 光纤连接器接口 MPO 型连接器系列 两排光纤

What is BS EN IEC 61754-7-2 - Fibre optic interconnecting devices and passive components about?    BS EN IEC 61754 is a series on fibre optic interconnecting devices and passive components. Fibre optic interconnecting devices and passive components is a fibre optic telecommunications technology for delivering  broadband  network access to end customers. BS EN IEC 61754-7-2 defines the standard interface dimensions for the type MPO family of connectors with two rows of fibres.   Who is BS EN IEC 61754-7-2 - Fibre optic interconnecting devices and passive components for?   BS EN IEC 61754-7-2 on fibre optic interconnecting devices and passive components is useful for:   Telecommunication component manufacturers

Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces - Type MPO connector family. Two fibre rows

JIS C 5964-6-100:2018 光纤连接器接口.第6-100部分:MU型连接器系列.简化可接收的MU-PC连接器接口(F17型)

Fiber optic connector interfaces -- Part 6-100: Type MU connector family -- Simplified receptacle MU-PC connector interfaces (F17 type)

JIS C 5965-3-31:2018 光纤互连装置和无源元件. 连接器光学接口. 第3-31部分:单模物理接触光纤连接器参数. 第1排8度角矩形聚苯硫醚套圈

Fiber optic interconnecting devices and passive components -- Connector optical interfaces -- Part 3-31: Connector parameters of single mode physically contacting fibers -- One-row 8 degree angled rectangular polyphenylene sulphide ferrules

JIS C 5962:2018 光纤连接器通用技术条件

Generic specification of fiber optic connector

IEC 61754-7-2:2017 光纤互连设备和无源元件 - 光纤连接器接口 - 第7-2部分:Mpo连接器系列 - 两根光纤线

This part of IEC 61754 defines the standard interface dimensions for the type MPO family of connectors with two rows of fibres.

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPO connector family - Two fibre rows

EN 61753-121-2:2017 光纤互连器件和无源器件.性能标准.第121-2部分:C类单模光纤单工和双工线及圆柱形套筒连接器.受控环境

IEC 61753-121-2:2010(E) specifies the test requirements for finished cable assemblies for use as patchcords, work area cords and equipment cords for applications in a controlled (C) environment according to IEC 61753-1, where the connectors already comply, with the Category C requirements of IEC 61753-1. The assemblies consist of simplex or duplex fibre optic cable terminated at each end of the cable with non-angled (PC) or angled (APC) polished single-mode fibre optic connectors with cylindrical ferrules. The wavelength of operation is between 1 260 nm and 1 625 nm.

Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment

GSO IEC 61754-7-1:2017 光纤互连器件和无源元件 光纤连接器接口 第7-1部分：MPO 型连接器系列 一根光纤

This part of IEC 61754 defines the standard interface dimensions for type MPO family of connectors with one row of fibres.

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row

GSO IEC 61754-30:2017 光纤互连装置和无源元件 光纤连接器接口 第30部分：CLIK型连接器系列

This part of IEC 61754 defines the standard interface dimensions for the type CLIK series of connectors.

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 30: Type CLIK connector series

GSO IEC 61753-053-2:2017 光纤互连设备和无源元件 性能标准 第053-2部分：C 类非连接器单模光纤、电控可变光衰减器 受控环境

This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which non-connectorized single-mode fibre electrically controlled variable optical attenuator needs to satisfy in order to be categorised as meeting the requirements of category C-Controlled environments, as defined in Annex A of IEC 61753-1:2007.

Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments

GSO IEC 61753-084-2:2017 光纤互连设备和无源元件性能标准 第084-2部分：C 类非连接器单模 980/1550 nm WWDM 设备 受控环境

This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a fibre optic pigtailed 980/1 550 nm WWDM device must satisfy in order to be categorized as meeting the requirements of category C (controlled environments), as defined in Annex A of IEC 61753-1. The requirements cover devices with single-mode non-connectorised pigtails. This device has three ports; 980 nm input, 1 550 nm input and common port for output of combining 980/1 550 nm input light.

Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment

GSO IEC 61753-089-2:2017 光纤互连设备和无源组件 性能标准 第089-2部分：C 类非连接器单模双向 OTDR 监控 WWDM 设备 受控环境

This part of IEC 61753 contains the minimum initial performance, test and measurement requirements and severities which a fibre optic pigtailed wide wavelength division multiplexing (WWDM) device for monitoring passive optical networks (PON) using an optical time-domain reflectometer (OTDR) satisfies in order to be categorized as meeting the requirements of category C (controlled environments), as defined in Annex A of IEC 61753-1:2007. Annex B of this standard provides information concerning the principle and function of the OTDR monitoring WWDM.

Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment

GSO IEC 61753-021-3:2017 光纤互连装置和无源元件 性能标准 第021-3部分：U 类单模光纤连接器 非受控环境

This part of IEC 61753 defines minimum initial test and measurement requirements and severities which a single-mode connector, either part of a pigtail, or part of a cord, must satisfy in order to be categorized as meeting the IEC standard category U (uncontrolled environment).

Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment

GSO IEC 61300-2-7:2017 光纤互连装置和无源元件 基本测试和测量程序 第2-7部分：测试 弯矩

This part of IEC 61300 details a procedure for determining the suitability of a fibre optic device to withstand the environmental condition of a bending moment which may occur in actual use, storage and/or transport. The test is primarily intended to permit the observation of effects of a bending moment. The bending moment may result in effects that would destroy functional utility, cause loss of physical strength, and cause changes in other important mechanical properties. Degradation of optical properties may also occur. The specimen may be a component, a connector set, a splice or other device combination intended for fibre optic usage.

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment

GSO IEC 61754-29:2017 光纤互连器件和无源元件 光纤连接器接口 第29部分：BLINK型连接器系列

This part of IEC 61754 defines the standard interface dimensions for the type BLINK series of connectors.

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 29: Type BLINK connector series

GSO IEC/TR 62627-03-02:2017 光纤互连装置和无源器件 第03-02部分：可靠性 指定无源光器件的高功率传输测试报告

This part of IEC 62627 describes test data relating to high power damage of fixed optical attenuators, optical isolators and optical splitters (non-wavelength selective branching devices). It also describes the test of thermal simulation and failure mechanism analysis for the above passive optical components on high power transmission.

Fiber optic interconnecting devices and passive components - Part 03-02: Reliability - Report of high power transmission test of specified passive optical components

GSO IEC 61753-121-3:2017 光纤互连装置和无源元件 性能标准 第121-3部分：U 类带单模光纤和圆柱形插芯连接器的单工和双工电线 非受控环境

This part of IEC 61753 specifies the test requirements for finished cable assemblies for use as patchcords, work area cords and equipment cords for applications in a uncontrolled (U) environment according to IEC 61753-1, where the connectors already comply with the Category U requirements of IEC 61753-1. The assemblies consist of simplex or duplex fibre optic cable terminated at each end of the cable with non-angled (PC) or angled (APC) polished single-mode fibre optic connectors with cylindrical ferrules. The wavelength of operation is between 1 260 nm and 1 625 nm. The relevant requirements for mechanical and optical connectivity systems are covered by mechanical and optical interface standards IEC 61754 series and IEC 61755 series respectively. The relevant requirements for connector sets are covered by IEC 61753 series. The relevant requirements for cable are covered by IEC 60794-2-50.

Fibre optic interconnecting devices and passive components - Performance standard - Part 121-3: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U - Uncontrolled environment