35.040.50 标准查询与下载

BS ISO/IEC 29167-16:2022 信息技术 自动识别和数据捕获技术 用于空中接口通信的加密套件 ECDSA-ECDH 安全服务

1   Scope This document describes a crypto suite based on elliptic curve cryptography (ECC) for the ISO/IEC 18000 series of standards protocol. In particular, this document specifies the use of elliptic curve Diffie-Hellman (ECDH) key agreement in a secure channel establishment and the use of elliptic curve digital signature algorithm (ECDSA) in an authentication mechanism. This document specifies a crypto suite for ECDSA-ECDH for air interface for RFID systems. The crypto suite is defined in alignment with existing air interfaces. This document defines a mutual authentication method and methods of use for the cipher. A Tag and an Interrogator can support one, a subset, or all of the specified options, clearly stating what is supported. Key update is not supported in this document. ECDSA-ECDH cipher is a high-weight security protocol especially for active RFID system, aiming at meeting those scenarios with high level security requirement.

Information technology. Automatic identification and data capture techniques - Crypto suite ECDSA-ECDH security services for air interface communications

BS ISO/IEC 11179-33:2023 信息技术 元数据注册表(MDR)用于数据集注册的元模型

1   Scope This document provides a specification for an extension to a Metadata Registry (MDR), as specified in ISO/IEC 11179‑3 in which metadata which describes data sets , collections of data available for access or download in one or more formats, can be registered. Since a set can contain a single element, this document enables the recording of metadata about a single data value. The registered metadata provides information about the data set that can include the provenance of the data set and quality, fitness for role, and risk assessments of the data set .

Information technology. Metadata registries (MDR). Metamodel for data set registration

ISO/IEC 29167-11:2023 信息技术.自动识别和数据捕获技术.第11部分:空中接口通信用加密套件PRESENT-80安全服务

This document defines the crypto suite for PRESENT-80 for the ISO/IEC 18000 series of air interfaces standards for radio frequency identification (RFID) devices. This document provides a common crypto suite for security for RFID devices for air interface standards and application standards. The crypto suite is defined in alignment with existing air interfaces. This document specifies basic security services that are use the lightweight block cipher PRESENT-80. The variant of PRESENT that takes 128-bit keys is also considered in this document. This document defines various methods of use for the cipher. A Tag and an Interrogator can support one, a subset, or all of the specified options, clearly stating what is supported.

Information technology — Automatic identification and data capture techniques — Part 11: Crypto suite PRESENT-80 security services for air interface communications

BS ISO/IEC 11179-3:2023 信息技术 元数据注册表(MDR)注册表通用设施的元模型

1   Scope 1.1   Structure of a metadata registry This document specifies the information to be recorded in a metadata registry in the form of a conceptual data model : — Clause 5 specifies the approach used to model a metadata registry ; — Clause 6 specifies the Core Model of the registry , including basic types and classes to be reused in extending the model. The core model defines a generic “ registry item”, from which any type of item that needs to registered can be sub-classed; — Clause 7 specifies the metamodel for Identification of registry items; — Clause 8 specifies the metamodel for Designation and Definition of registry items; — Clause 9 specifies the metamodel for Registration of

Information technology. Metadata registries (MDR). Metamodel for registry common facilities

BS ISO/IEC 11179-1:2023 信息技术 元数据注册表(MDR)框架

1   Scope This document provides the means for understanding and associating the individual parts of ISO/IEC 11179 and is the foundation for a conceptual understanding of metadata and metadata registries . This document also describes the relationship of ISO/IEC 11179 to other JTC 1/SC 32 standards, technical specifications and technical reports on metadata . In all parts of ISO/IEC 11179, metadata refers to descriptions of data . It does not contain a general treatment of metadata .

Information technology. Metadata registries (MDR). Framework

BS ISO/IEC 11179-31:2023 信息技术 元数据注册表(MDR)数据规范注册元模型

1   Scope This document provides a specification for an extension to a Metadata Registry (MDR), as specified in ISO/IEC 11179‑3, in which metadata that describes data elements and associated concepts , such as “ data element concepts ”, “ conceptual domains ” and “ value domains ” can be registered. The specification in this document, together with the relevant clauses of the specification in ISO/IEC 11179‑3, provides the ability to record metadata about: a) data elements, units of measure and derivation rules; b) data element concepts and associated object classes and properties ; c) conceptual domains , conceptual domain subsets and value meanings ; d) value domains , value domain subsets, datatypes and permissible values . This document is applicable to the fo...

Information technology. Metadata registries (MDR). Metamodel for data specification registration

23/30431340 DC BS ISO/IEC 6523-1 信息技术 组织和组织部分的识别结构 第 1 部分：组织识别方案的识别

BS ISO/IEC 6523-1. Information technology. Structure for the identification of organizations and organization parts - Part 1. Identification of organization identification schemes

ISO/IEC 11179-35:2023 信息技术.元数据注册（MDR）.第35部分：模型注册的元模型

This document provides a specification for an extension to a Metadata Registry (MDR), as specified in ISO/IEC 11179-3, in which metadata that describes models, and their associated metamodels, can be registered. The specification in this document, together with the relevant clauses of the specification in ISO/IEC 11179-3, provides the ability to record metadata about: a) models used in software engineering or information processing, for example, information or data models, process models, models of web services or any other type of models used to develop software systems or the processing of information; b) the concepts associated with the various elements within the models; c) the metamodels associated with the models; d) the mappings identified between the models, between the metamodels, and between the models and their associated metamodels – this is achieved by using the mapping facilities specified in ISO/IEC 11179-3. This document is applicable to the formulation of models and metamodels to be shared among people and machines, independent of the organization that produces the model or metamodel. It is not applicable to the physical instantiation of any model.

Information technology — Metadata registries (MDR) — Part 35: Metamodel for model registration

23/30453327 DC BS ISO/IEC 19763-1 信息技术 互操作性元模型框架 (MFI) 第 1 部分：框架

BS ISO/IEC 19763-1. Information technology. Metamodel framework for interoperability (MFI) - Part 1. Framework

23/30453331 DC BS ISO/IEC 19763-10 信息技术 互操作性元模型框架 (MFI) 第 10 部分：核心模型和基本映射

BS ISO/IEC 19763-10. Information technology. Metamodel framework for interoperability (MFI) - Part 10. Core model and basic mapping

ISO 15000-3:2023 电子商务可扩展标记语言（ebXML）.第3部分：注册表和存储库

This part of ISO 15000 specifies service interfaces, protocols and information model for an integrated registry and repository. The repository stores electronic content while the registry stores metadata that describes the content in the repository.

Electronic business eXtensible Markup Language (ebXML) — Part 3: Registry and repository

CSA ISO/IEC 5218:2023 信息技术 人类性别代表代码

1 Scope This document specifies a uniform representation of human sexes for the interchange of information. It is intended to: — reduce the time required to record and/or format the representation of sexes and transmit the corresponding data; — improve clarity and accuracy of interchange; — minimize the amount of human intervention required for communicating the representation of sexes; and — reduce costs. This document does not prescribe file sequences, storage media, programming languages, or other features of information processing to be used in its implementation. This document meets the requirements of most applications that need to code human sexes. It does not provide codes for sexes that can be required in specific medical and scientific applications or in applications that need to code sex information other than for human beings. It also does not provide codes for human gender identities that can be required in other applications. This document does not supplant national standards for coding sexes that are designed based upon codes derived from names of sexes in the various languages (for example “M” for “male” and “F” for “female” in the English language). It provides a numeric code that is independent of language-derived codes and as such is intended to provide a common basis for the international exchange of information containing human sex data elements.

Information technology — Codes for the representation of human sexes

DB13/T 5647-2022 基于区块链的航天遥感数据分发权限验证要求

Requirements for permission verification of space remote sensing data distribution based on blockchain

BS ISO/IEC 24791-3:2022 信息技术 用于物品管理的射频识别(RFID)软件系统基础设施 设备管理

1   Scope 1.1   General This document defines interfaces for device management of RFID systems. Interfaces are defined that provide for discovery, configuration, initialization and monitoring of RFID systems within the software system infrastructure (SSI). This document only deals with devices that provide RFID related services. It does not distinguish the form factor of such RFID devices. This document provides two distinct interface sets , one based on the GS1 EPCglobal DCI standard and the IETF SNMP RFCs and the other based on the Organization for the Advancement of Structured Information Standards (OASIS) DPWS standard. The definition of the Device Profile for RFID is referred to in this document as the RFID Device Management Profile, or RDMP. Each interface option set provides interface definitions that provide ISO/IEC 24791-3 Client Endpoints and Services Endpoints with the mechanisms for: — the discovery of the RFID devices and services on a local or remote subnet; — a firmware upgrade service; — a management service that implements configuration related functions; — a monitoring service for reporting alerts, diagnosti...

Information technology. Radio frequency identification (RFID) for item management. Software system infrastructure. Device management

22/30433185 DC BS ISO/IEC 15426-2 信息技术 自动识别和数据捕获技术 条形码验证器一致性规范 第 2 部分：二维符号

BS ISO/IEC 15426-2. Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specification - Part 2. Two-dimensional symbols

CSA ISO/IEC 18000-63:2022 信息技术 用于物品管理的射频识别 第63部分：860 MHz至960 MHz C型空中接口通信参数

1 Scope This document defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz industrial, scientific, and medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used to develop RFID application standards. This document is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface. This document specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, i.e. a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator. This document specifies — physical interactions (the signalling layer of the communication link) between Interrogators and tags; — logical operating procedures and commands between Interrogators and Tags; — the collision arbitration scheme used to identify a specific tag in a multiple-tag environment; — optional security commands that allow the use of crypto suites of ISO/IEC 29167.

Information technology — Radio frequency identification for item management — Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C

CSA ISO/IEC 15961-1:2022 信息技术 用于物品管理的射频识别（RFID）数据协议 第1部分：应用程序接口

1 Scope This document focuses on the abstract interface between an application and the data processor and includes the specification and definition of application commands and responses. It allows data and commands to be specified in a standardised way, independent of the ISO/IEC 18000 series air interfaces. This document: — provides guidelines on presenting data as objects; — defines the structure of Object Identifiers, based on ISO/IEC 9834-1; — specifies the commands that are supported for transferring data between an application and the radio frequency identification (RFID) tag; — specifies the responses that are supported for transferring data between the tag and the application; — does not specify any required transfer syntax with ISO/IEC 15962, but provides the non-normative information in Annex A for backward compatibility with the 2004 version of this document (ISO/IEC 15961:20041)).

Information technology — Data protocol for radio frequency identification (RFID) for item management — Part 1: Application interface

CSA ISO/IEC 15962:2022 信息技术 用于物品管理的射频识别（RFID） 数据协议：数据编码规则和逻辑存储功能

1 Scope This document focuses on encoding the transfer syntax of the application commands defined in ISO/IEC 15961-1. The encodation is in a Logical Memory as a software analogue of the physical memory of the RFID tag being addressed by the interrogator. This document — defines the encoded structure of object identifiers; — specifies the data compaction rules that apply to the encoded data; — specifies a Precursor for encoding syntax features efficiently; — specifies formatting rules for the data, e.g. depending on whether a directory is used or not; — defines how application commands, e.g. to lock data, are transferred to the Tag Driver; — specifies processes associated with sensory information and the transfers to the Tag Driver; — defines other communication to the application.

Information technology — Radio frequency identification (RFID) for item management — Data protocol: data encoding rules and logical memory functions

BS ISO/IEC 20248:2022 信息技术 自动识别和数据捕获技术 数字签名数据结构架构

1   Scope This document is an ISO/IEC 9594‑8 [ public key infrastructure (PKI) digital signatures and certificates ] application specification for automated identification services. It specifies a method whereby data stored within a barcode and/or RFID tag are structured, encoded and digitally signed. ISO/IEC 9594‑8 is used to provide a standard method for key and data description management and distribution. The data capacity and/or data transfer capacity of automated identification data carriers are restricted. This restricts the normal use of a digital signature as specified in ISO/IEC 9594‑8 within automated identification services. The purpose of this document is to provide an open and interoperable method, between automated identification services and data carriers, to read data, verify data originality and data integrity in an offline use case. This document specifies — the meta data structure, the DigSig , which contains the digital signature and encoded structured data, — the public key certificate parameter and extension use, the DigSig certificate , which contains the certified associated public key , the structured data description, the read methods, and private containers,

Information technology. Automatic identification and data capture techniques. Digital signature data structure schema

BS ISO/IEC 5218:2022 信息技术 人类性别代表代码

1   Scope This document specifies a uniform representation of human sexes for the interchange of information. It is intended to: — reduce the time required to record and/or format the representation of sexes and transmit the corresponding data; — improve clarity and accuracy of interchange; — minimize the amount of human intervention required for communicating the representation of sexes; and — reduce costs. This document does not prescribe file sequences, storage media, programming languages, or other features of information processing to be used in its implementation. This document meets the requirements of most applications that need to code human sexes. It does not provide codes for sexes that can be required in specific medical and scientific applications or in applications that need to code sex information other than for human beings. It also does not provide codes for human gender identities that can be required in other applications. This document does not supplant national standards for coding sexes that are designed based upon codes derived from names of sexes in the various languages (for example “M” for “male” and “F” for “female” in the English language). It provides a numeric code that is independent of language-deri...

Information technology - Codes for the representation of human sexes