35.100.05 多层应用 标准查询与下载

ISO/IEC ISP 12062-4:2003 信息技术.国际标准化轮廓AMH2n.电文处理系统.人际报文通信.第4部分:AMH23和AMH25.MTS访问(P3)和MTS 94访问(P3)的IPM要求

1 General This part of ISO/IEC ISP 12062 covers access to a Message Transfer System (MTS) in an Interpersonal Messaging (IPM) environment using the P3 MTS Access Protocol (see also figure 1). These specifications form part of the Interpersonal Messaging application functions, as defined in the parts of ISO/IEC ISP 12062, and are based on the Common Messaging content type-independent specifications in ISO/IEC ISP 10611. An MTA or an MTS-user which conforms to profile AMH23 as specified in this part of ISO/IEC ISP 12062 shall support profile AMH12 as specified in ISO/IEC ISP 10611-4. An MTA or an MTS-user which conforms to profile AMH25 as specified in this part of ISO/IEC ISP 12062 shall support profile AMH14 as specified in ISO/IEC ISP 10611-4. 2 Position within the taxonomy This part of ISO/IEC ISP 12062 is the fourth part of a multipart ISP identified in ISO/IEC TR 10000-2 as "AMH2, Message Handling Systems - Interpersonal Messaging". This part of ISO/IEC ISP 12062 specifies the following profiles: AMH23 - IPM Requirements for MTS Access (P3) AMH25 - IPM Requirements for MTS 95 Access (P3) The AMH23 and AMH25 profiles may be combined with any T-Profiles (see ISO/IEC TR 10000) specifying the OSI connection-mode Transport service. 3 Scenario The model used is one of access to an MTS by an IPM MTS-user - specifically, the intercommunication between a message transfer agent (MTA) and an IPM MTS-user using the P3 protocol, as shown in figure 1. The AMH23 and AMH25 profiles covers all aspects of the MTS Abstract Service, as defined in clause 8 of ISO/IEC 10021-4, when realized using the P3 protocol in an IPM environment. The OSI upper layer services and protocols to support the Message Handling Systems functions covered by the AMH23 and AMH25 profiles are specified in subclause 1.3 of ISO/IEC ISP 10611-4.

Information technology - International Standardized Profiles AMH2n; Message Handling Systems; Interpersonal Messaging - Part 4: AMH23 and AMH25; IPM Requirements for MTS Access (P3) and MTS 94 Access (P3)

ISO/IEC ISP 12062-3:2003 信息技术.国际标准化轮廓AMH2n.电文处理系统.人际消息交换.第3部分:AMH22.信息传送(P1)用的IPM要求

1 General This part of ISO/IEC ISP 12062 covers message transfer between Message Transfer Agents (MTAs) in an Interpersonal Messaging (IPM) environment using the P1 Message Transfer Protocol (see also figure 1). These specifications form part of the Interpersonal Messaging application functions, as defined in the parts of ISO/IEC ISP 12062, and are based on the Common Messaging content type-independent specifications in ISO/IEC ISP 10611. 2 Position within the taxonomy This part of ISO/IEC ISP 12062 is the third part of a multipart ISP identified in ISO/IEC TR 10000-2 as "AMH2, Message Handling Systems - Interpersonal Messaging". This part of ISO/IEC ISP 12062 specifies the following profile: AMH22 - IPM Requirements for Message Transfer (P1) The AMH22 profile may be combined with any T-Profiles (see ISO/IEC TR 10000) specifying the OSI connection-mode Transport service. 3 Scenario The model used is one of two or more MTAs intercommunicating within a Message Transfer System (MTS) using the P1 protocol, as shown in figure 1. NOTE - In an ITU-T context, a domain may be treated as an MTA for the purposes of conformance to the AMH22 profile. The AMH22 profile covers all aspects of the MTA Abstract Service, as defined in clause 12 of ISO/IEC 10021-4, when realized using the P1 protocol in an IPM environment. The OSI upper layer services and protocols to support the Message Handling Systems functions covered by the AMH22 profile are specified in subclause 1.3 of ISO/IEC ISP 10611-3.

Information technology - International Standardized Profiles AMH2n; Message Handling Systems; Interpersonal messaging - Part 3: AMH22; IPM Requirements for Message Transfer (P1)

ISO/IEC ISP 12062-2:2003 信息技术.国际标准化轮廓AMH2n.电文处理系统.人际报文通信.第2部分:AMH21.IPM内容

1 General This part of ISO/IEC ISP 12062 covers the interchange of messages between Interpersonal Messaging (IPM) User Agents (UAs) (see also figure 1). These specifications form part of the Interpersonal Messaging application functions, as defined in the parts of ISO/IEC ISP 12062, and are based on the Common Messaging content type-independent specifications in ISO/IEC ISP 10611. 2 Position within the taxonomy This part of ISO/IEC ISP 12062 is the second part of a multipart ISP identified in ISO/IEC TR 10000-2 as "AMH2, Message Handling Systems - Interpersonal Messaging" (see also ISO/IEC TR 10000-1, 8.2 for the definition of multipart ISPs). This part of ISO/IEC ISP 12062 specifies the following profile: AMH21 - IPM Content The AMH21 profile may optionally be combined with profiles AMH23, AMH24, AMH25 or AMH26 (see annex D of ISO/IEC ISP 12062-1) specifying OSI MHS communications protocols and supporting services for an IPM UA. 3 Scenario The model used is one of indirect interchange of interpersonal messages (content types 22 and 2) between IPM UAs via an intermediate Message Transfer System (MTS), as shown in figure 1. The provision of, and access to, the MTS is outside the scope of this profile. The MHS services and functions covered by the AMH21 profile are specified in ISO/IEC 10021-7. There are no OSI upper layer services and protocols within the scope of the AMH21 profile.

Information technology - International Standardized Profiles AMH2n; Message Handling Systems; Interpersonal Messaging - Part 2: AMH21; IPM Content

ISO/IEC ISP 12062-1:2003 信息技术.国际标准化轮廓AMH2n.电文处理系统.人际消息交换.第1部分:IPM MHS服务支持

1 General This part of ISO/IEC ISP 12062 contains the overall specifications of the support of MHS Elements of Service and associated MHS functionality in an Interpersonal Messaging (IPM) environment which are generally not appropriate for consideration only from the perspective of a single MHS protocol. These specifications form part of the Interpersonal Messaging application functions, as defined in the parts of ISO/IEC ISP 12062, and are based on the Common Messaging content type-independent specifications in ISO/IEC ISP 10611. Such specifications are in many cases applicable to more than one MHS protocol or are otherwise concerned with component functionality which, although it can be verified via protocol, is not just related to protocol support. They are therefore designed to be referenced in the MHS Interpersonal Messaging application profiles ISO/IEC ISP 12062-2 (AMH21), ISO/IEC ISP 12062-3 (AMH22), ISO/IEC ISP 12062-4 (AMH23 and AMH25), ISO/IEC ISP 12062-5 (AMH24) and ISO/IEC ISP 12062-6 (AMH26), which specify the support of specific MHS protocols and associated functionality. The specifications in this part of ISO/IEC ISP 12062 are divided into basic requirements, which are required to be supported by all IPM MHS implementations, and a number of optional functional groups, which cover significant discrete areas of related functionality which are not required to be supported by all implementations. An overview of the scope and applicability of the AMH2n set of profiles and of the structure of this multipart ISP is provided in annex D. 2 Position within the taxonomy This part of ISO/IEC ISP 12062 is the first part, as common text, of a multipart ISP identified in ISO/IEC TR 10000-2 as "AMH2, Message Handling Systems - Interpersonal Messaging" (see also ISO/IEC TR 10000-1, 8.2 for the definition of multipart ISPs). This part of ISO/IEC ISP 12062 does not, on its own, specify any profiles.

Information technology - International Standardized Profiles AMH2n; Message Handling Systems; Interpersonal Messaging - Part 1: IPM MHS Service Support

ISO/IEC ISP 10611-6:2003 信息技术.国际标准化轮廓AMH1n.电文处理系统.公共电文交换.第6部分:AMH15.MS 94访问(P7)

1 General This part of ISO/IEC ISP 10611 covers access to a message store (MS) using the P7 MS Access Protocol as defined in ISO/IEC 10021-5:1994 and ISO/IEC 10021-6:1996 (see also figure 1). These specifications form part of the Common Messaging application functions, as defined in the parts of ISO/IEC ISP 10611, which form a common basis for content type-dependent International Standardized Profiles for MHS that will be developed. 2 Position within the taxonomy This part of ISO/IEC ISP 10611 is the sixth part of a multipart ISP identified in ISO/IEC TR 10000-2 as "AMH1, Message Handling Systems - Common Messaging" (see also ISO/IEC TR 10000-1, 8.2 for the definition of multipart ISPs). This part of ISO/IEC ISP 10611 specifies the following profile: AMH15 - MS 94 Access (P7) The AMH15 profile may be combined with any T-Profiles (see ISO/IEC TR 10000) specifying the OSI connection-mode Transport service. 3 Scenario The model used is one of access to a message store (MS) by an MS-user - specifically, the intercommunication between an MS and an MS-user (i.e. a user agent) using the P7 protocol, as shown in figure 1. The AMH15 profile covers all aspects of the MS Abstract Service, as defined in ISO/IEC 10021-5:1994, when realized using the P7 protocol. The OSI upper layer services and protocols to support the Message Handling Systems functions covered by the AMH15 profile are specified in the set of standards identified in table 1.

Information technology - International Standardized Profiles AMH1n; Message Handling Systems; Common Messaging - Part 6: AMH15; MS 94 Access (P7)

ISO/IEC ISP 10611-5:2003 信息技术.国际标准化轮廓AMH1n.电文处理系统.公共电文交换.第5部分:AMH13.MS访问(P7)

1 General This part of ISO/IEC ISP 10611 covers access to a message store (MS) using the P7 MS Access Protocol (see also figure 1). These specifications form part of the Common Messaging application functions, as defined in the parts of ISO/IEC ISP 10611, which form a common basis for content type-dependent International Standardized Profiles for MHS that will be developed. 2 Position within the taxonomy This part of ISO/IEC ISP 10611 is the fifth part of a multipart ISP identified in ISO/IEC TR 10000-2 as "AMH1, Message Handling Systems - Common Messaging". This part of ISO/IEC ISP 10611 specifies the following profile: AMH13-MS Access (P7) The AMH13 profile may be combined with any T-Profiles (see ISO/IEC TR 10000) specifying the OSI connection-mode Transport service. 3 Scenario The model used is one of access to a message store (MS) by an MS-user - specifically, the intercommunication between an MS and an MS-user (i.e. a user agent) using the P7 protocol, as shown in figure 1. The AMH13 profile covers all aspects of the MS Abstract Service, as defined in the 1990 publication of ISO/IEC 10021-5, when realized using the P7 protocol. (The AMH15 profile covers the MS 94 Abstract Service). The OSI upper layer services and protocols to support the Message Handling Systems functions covered by the AMH13 profile are specified in the set of standards identified in table 1.

Information technology - International Standardized Profiles AMH1n; Message Handling Systems; Common Messaging - Part 5: AMH13; MS Access (P7)

ISO/IEC ISP 10611-4:2003 信息技术.国际标准化轮廓AMH1n.电文处理系统.公共电文交换.第4部分:AMH12和AMH14.MTS访问(P3)和MTS 94访问(P3)

1 General This part of ISO/IEC ISP 10611 covers access to a Message Transfer System (MTS) using the P3 MTS Access Protocol (see also figure 1). These specifications form part of the Common Messaging application functions, as defined in the parts of ISO/IEC ISP 10611, which form a common basis for content type-dependent International Standardized Profiles for MHS that will be developed. An MTA or a MTS-user which conforms to profile AMH12 as specified in this part of ISO/IEC ISP 10611 shall support a 'mts-access' application context and for the MTA also 'mts-forced-access' application context . The MTA or the MTS-user may additionally conform to profile AMH14 as specified in this part of ISO/IEC ISP 10611 shall support the 'mts-access-94' and 'mts-forced-access-94' application contexts. 2 Position within the taxonomy This part of ISO/IEC ISP 10611 is the fourth part of a multipart ISP identified in ISO/IEC TR 10000-2 as "AMH1, Message Handling Systems - Common Messaging". This part of ISO/IEC ISP 10611 specifies the following profiles: AMH12- MTS Access (P3) AMH14 - MTS 94 Access (P3) The AMH12 and AMH14 profiles may be combined with any T-Profiles (see ISO/IEC TR 10000) specifying the OSI connection-mode Transport service. 3 Scenario The model used is one of access to an MTS by an MTS-user - specifically, the intercommunication between a message transfer agent (MTA) and an MTS-user using the P3 protocol, as shown in figure 1. The AMH12 and AMH14 profiles covers all aspects of the MTS Abstract Service, as defined in clause 8 of ISO/IEC 10021-4, when realized using the P3 protocol. The OSI upper layer services and protocols to support the Message Handling Systems functions covered by the AMH12 profile are specified in the set of standards identified in table 1.

Information technology - International Standardized Profiles AMH1n; Message Handling Systems; Common Messaging - Part 4: AMH12 and AMH14; MTS Access (P3) and MTS 94 Access (P3)

ISO/IEC ISP 10611-3:2003 信息技术.国际标准化轮廓AMH1n.电文处理系统.公共电文交换.第3部分:AMH11.信息传送(P1)

1 General This part of ISO/IEC ISP 10611 (AMH11) covers message transfer between message transfer agents (MTAs) using the P1 Message Transfer Protocol (see also figure 1). These specifications form part of the Common Messaging application functions, as defined in the parts of ISO/IEC ISP 10611, which form a common basis for content type-dependent International Standardized Profiles for MHS that will be developed. An MTA which conforms to profiles AMH11n as specified in this part of ISO/IEC ISP 10611 shall support a 'normal mode' OSI protocol infrastructure (AMH111) as required by both ISO/IEC 10021-6 and the ITU-T X.400 Recommendations, and may additionally support an 'X.410 mode' OSI protocol infrastructure (AMH112) as required, for ADMDs, by the ITU-T X.400 Recommendations. 2 Position within the taxonomy This part of ISO/IEC ISP 10611 is the third part of a multipart ISP identified in ISO/IEC TR 10000-2 as "AMH1, Message Handling Systems - Common Messaging". This part of ISO/IEC ISP 10611 specifies the following profiles: AMH111 - Message Transfer (P1) - Normal mode AMH112 - Message Transfer (P1) - X.410(1984) mode The AMH11n profiles may be combined with any T-Profiles (see ISO/IEC TR 10000) specifying the OSI connection-mode Transport service. 3 Scenario The model used is one of two or more MTAs intercommunicating within a Message Transfer System (MTS) using the P1 protocol, as shown in figure 1. NOTE - In an ITU-T context, a domain may be treated as an MTA for the purposes of conformance to the AMH11n profiles. The AMH11n profiles cover all aspects of the MTA Abstract Service, as defined in clause 12 of ISO/IEC 10021-4, when realized using the P1 protocol. The OSI upper layer services and protocols to support the Message Handling Systems functions covered by the AMH11n profiles are specified in the set of standards identified in table 1.

Information technology - International Standardized Profiles AMH1n; Message Handling Systems; Common Messaging - Part 3: AMH11; Message Transfer (P1)

ISO/IEC ISP 10611-1:2003 信息技术.国际标准化轮廓AMH1n.电文处理系统.公共电文交换.第1部分:MHS服务支持

1 General This part of ISO/IEC ISP 10611 contains the overall specifications of the support of MHS Elements of Service and associated MHS functionality which are generally not appropriate for consideration only from the perspective of a single MHS protocol. These specifications form part of the Common Messaging application functions, as defined in the parts of ISO/IEC ISP 10611, which form a common basis for content type-dependent International Standardized Profiles for MHS that will be developed. Such specifications are in many cases applicable to more than one MHS protocol or are otherwise concerned with component functionality which, although it can be verified via protocol, is not just related to protocol support. They are therefore designed to be referenced in the MHS Common Messaging application profiles ISO/IEC ISP 10611-3 (AMH11), ISO/IEC ISP 10611-4 (AMH12 and AMH14), ISO/IEC ISP 10611-5 (AMH13) and ISO/IEC ISP 10611-6 (AMH15), which specify the support of specific MHS protocols and associated functionality. The specifications in this part of ISO/IEC ISP 10611 cover the provision and use of features associated with the Message Transfer (MT) Service (MTS) (as defined in clause 8 of ISO/IEC 10021-1), together with those features associated with intercommunication with Physical Delivery (PD) Services (as defined in clause 10 of ISO/IEC 10021-1). Features which are associated with the Message Store (MS) and User Agent (UA) which are content type-independent are also covered. Features which are specific to a particular content type (including the provision of services by a UA to an MHS user) are covered in separate content type-dependent ISPs. The specifications in this part of ISO/IEC ISP 10611 are divided into basic requirements, which are required to be supported by all MHS implementations, and a number of optional functional groups, which cover significant discrete areas of related functionality which are not required to be supported by all implementations. An overview of the scope and applicability of the AMH1n set of profiles and of the structure of ISO/IEC ISP 10611 is provided in annex E. 2 Position within the taxonomy This part of ISO/IEC ISP 10611 is the first part, as common text, of a multipart ISP identified in ISO/IEC TR 10000-2 as "AMH1, Message Handling Systems - Common Messaging". This part of ISO/IEC ISP 10611 does not, on its own, specify any profiles.

Information technology - International Standardized Profiles AMH1n; Message Handling Systems; Common Messaging - Part 1: MHS Service Support

ISO/IEC ISP 12062-6:2003 信息技术.国际标准化轮廓AMH2n.电文处理系统.人际电文交换.第6部分:AMH26 增强的MS 94(P7)访问的IPM要求

1 General This part of ISO/IEC ISP 12062 covers access to a message store (MS) in an Interpersonal Messaging (IPM) environment using the P7 MS 94 Access Protocol (see also figure 1), as defined in ISO/IEC 10021-5:1994 and ISO/IEC 10021-6:1996. These specifications form part of the Interpersonal Messaging application functions, as defined in the parts of ISO/IEC ISP 12062, and are based on the Common Messaging content type-independent specifications in ISO/IEC ISP 10611. The type of MS access specified in this part of ISO/IEC ISP 12062 allows an IPM user agent (UA) to interact with an MS in a full and flexible manner without having to retrieve complete messages. Minimal attribute support for MS 94 access in an IPM environment can be specified by claiming conformance to profile AMH15 with an additional claim of support of IPM MS attributes (see subclause A.3.1 of ISO/IEC ISP 10611-6). Annex A of this part of ISO/IEC ISP 12062 may be used in such a case. 2 Position within the taxonomy This part of ISO/IEC ISP 12062 is the sixth part of a multipart ISP identified in ISO/IEC TR 10000-2 as "AMH2, Message Handling Systems - Interpersonal Messaging". This part of ISO/IEC ISP 12062 specifies the following profile: AMH26 - IPM Requirements for Enhanced MS 94 Access (P7) The AMH26 profile may be combined with any T-Profiles (see ISO/IEC TR 10000) specifying the OSI connection-mode Transport service. 3 Scenario The model used is one of access to an IPM message store (MS) by an IPM MS-user - specifically, the intercommunication between an IPM MS and an IPM MS-user (i.e. an IPM user agent) using the P7 protocol, as shown in figure 1. The AMH26 profile covers all aspects of the MS Abstract Service, as defined in ISO/IEC 10021-5, when realized using the P7 protocol in an IPM environment. The OSI upper layer services and protocols to support the Message Handling Systems functions covered by the AMH26 profile are specified in subclause 1.3 of ISO/IEC ISP 10611-6.

Information technology - International standardized profiles AMH2n - Message handling systems - Interpersonal messaging - Part 6: AMH26 - IPM Requirements for Enhanced MS 94 Access (P7)

KS X ISO/IEC 10000-3-2003(2008) 信息技术国际标准化概要的框架和分类第3部分:开放系统环境概要的原则和分类

Information technology－Framework and taxonomy of International Standardized Profiles－Part 3：Principles and Taxonomy for Open System Environment Profiles

KS X ISO/IEC 10000-2-2003(2008) 信息技术国际标准化轮廓的框架和分类第2部分:OSI轮廓的原理和分类

Information technology－Framework and taxonomy of International Standardized Profiles－Part 2：Principles and Taxonomy for OSI Profiles

KS X ISO/IEC ISP 12062-4-2003(2013) 信息技术——国际标准化概要AMH2n——信息处理系统——人际信息——第4部分:AMH23和AMH25——MTS接入（P3）和MTS 94接入（P3）的IPM要求

Information technology－International standardized profiles AMH2n－Message handling systems－Interpersonal messaging－Part 4：AMH23 and AMH25－IPM requirements for MTS access(P3) and MTS 94 access(P3)

KS X ISO/IEC ISP 12062-5-2003(2008) 信息技术 - 国际标准资料AMH2n-消息处理部5之间的系统的各个消息:AMH24 - 扩展MS访问（P7）所需的IPM信息

Information technology－International standardized profiles AMH2n－message handling systems－Interpersonal messaging－Part 5：AMH24－IPM requirements for enhanced MS access(P7)

KS X ISO/IEC ISP 12062-3-2003(2013) 信息技术国际标准化轮廓AMH2n报文处理系统人际报文第3部分:AMH22-IPM报文传输要求（P1）

Information technology－International standardized profiles AMH2n－Message handling systems－Interpersonal messaging－Part 3：AMH22－IPM requirements for message transfer(P1)

KS X ISO/IEC ISP 12062-2-2003(2013) 信息技术国际标准化轮廓AMH2n信息处理系统人际信息第2部分:AMH21-IPM内容

Information technology－International standardized profiles AMH2n－Message handling systems－Interpersonal messaging－Part 2：AMH21－IPM content

KS X ISO/IEC ISP 12062-1-2003(2013) 信息技术.国际标准化轮廓AMH2n.信息处理系统.人际信息.第1部分:IPM MHS服务支持

Information technology－International standardized profiles AMH2n－Message handling systems－Interpersonal messaging－Part 1：IPM MHS service support

ARINC 635-4 ITEM 6.0-2003 服务协议3层网络层

Services and Protocol of Layer 3 - The Network Layer

Services and Protocol of Layer 3 - The Network Layer

KS X ISO/IEC 11188-2-2002(2007) 信息技术国际标准化外形通用上层要求第2部分:基于ROSE外形的面向连接的基本要求

Information technology－International Standardized Profiles－Common upper layer requirements－Part 2：Basic connection oriented requirementsfor ROSE-based profiles

KS X ISO/IEC 10000-1-2002(2012) 信息技术国际标准化轮廓的框架和分类第1部分:总则和文献框架

Information technology－Framework and taxonomy of International Standardized Profile－Part 1：General principles and documentation framework