35.100.05 多层应用 标准查询与下载

CAN/CSA-ISO/IEC ISP 10609-25-1999(R2007) 信息技术 国际标准化配置文件 TB、TC、TD 和 Te 连接模式网络服务上的连接模式传输服务 第25部分：Q.931 电路交换操作的子网类型相关要求

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-25:1995. 1 Scope ISO/IEC ISP 10609 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, whcih collectively provide the connection-mode Transport Service using the connection-mode Network Service. This part of ISO/IEC ISP 10609 specifies the requirements for Network Layer that apply specifically to configurations involving access to an ISDn subnetwork using a circuit-mode bearer service.

Information technology - International Standardized Profiles TB, TC, TD and Te - Connection-mode Transport Service over connection-mode Network Service - Part 25: Subnetwork-type dependent requirements for Q.931 circuit-switched operation

CAN/CSA-ISO/IEC ISP 10609-1-1999(R2007) 信息技术 国际标准化配置文件 TB、TC、TD 和 TE 连接模式网络服务上的连接模式传输服务 第1部分：TB 组的子网类型独立要求

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-1:1992. 1 Scope This part of ISO/IEC ISP 10609 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode Network Service. This part of ISO/IEC ISP 10609 is applicable to the provision of the connection-mode Transport Service in end systems attached to any type of subnetwork from which the standardized connection-mode Network Service can be made available. Profiles of the Conection-mode Transport Service over Connection-mode Network Service are grouped according to their required support of transport protocol class(es). Group TB: Includes transport protocol classes 0, 2 and 4 Group TC: Includes transport protocol classes 0 and 2 Group TD: Includes transport protocol class 0 Group TE: Includes transport protocol class 2 This part of ISO/IEC ISP 10609 specifies the subnetwork-type independent requirements for Group TB.

Information technology - International Standardized Profiles TB, TC, TD and TE - Connection-mode Transport Service over connection-mode Network Service - Part 1: Subnetwork-type independent requirements for Group TB

CAN/CSA-ISO/IEC ISP 10609-11-1999(R2007) 信息技术 国际标准化配置文件 TB、TC、TD 和 Te 连接模式网络服务上的连接模式传输服务 第11部分：CSMA/CD 子网相关、媒体相关要求

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-11:1994. 1 Scope This International Standardized Profile is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode Network Service. This part of ISO/IEC ISP 10609 applies only to communication over those subnetworks which are ISO/IEC 8802-3 CSMA/CD LANs.

Information technology - International Standardized Profiles TB, TC, TD and Te - Connection-mode Transport Service over connection-mode Network Service - Part 11: CSMA/CD subnetwork-dependent, media-dependent requirements

CAN/CSA-ISO/IEC ISP 10609-32-1999(R2007) 信息技术 国际标准化配置文件 TB、TC、TD 和 Te 连接模式网络服务上的连接模式传输服务 第32部分：配置文件定义 TC4111

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-32:1995. 1 Scope 1.1 General ISO/IEC ISP 10609 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode Network Service. This part of ISO/IEC ISP 10609 defines the profile TC4111. The TC4111 profile is in the TC Group which supports Transport protocol classes 0 and 2.

Information technology - International Standardized Profiles TB, TC, TD and Te - Connection-mode Transport Service over connection-mode Network Service - Part 32: Definition of profile TC4111

CAN/CSA-ISO/IEC ISP 10609-3-1999(R2007) 信息技术 国际标准化配置文件 TB、TC、TD 和 TE 连接模式网络服务上的连接模式传输服务 第3部分：TD 组的子网类型独立要求

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-3:1992. 1 Scope This part of ISO/IEC ISP 10609 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode Network Service. This part of ISO/IEC ISP 10609 is applicable to the provision of the connection-mode Transport Service in end systems attached to any type of subnetwork from which the standardized connection-mode Network Service can be made available. Profiles of the Connection-mode Transport Service over Connection-mode Network Service are grouped according to their required support of transport protocol class(es). Group TB: Includes transport protocol classes 0, 2, and 4 Group TC: Includes transport protocol classes 0 and 2 Group TD: Includes transport protocol class 0 Group TE: Includes transport protocol class 2 This part of ISO/IEC ISP 10609 specifies the subnetwork-type independent requirements for Group TD.

Information technology - International Standardized Profiles TB, TC, TD and TE - Connection-mode Transport Service over connection-mode Network Service - Part 3: Subnetwork-type independent requirements for Group TD

CAN/CSA-ISO/IEC ISP 10609-30-1999(R2007) 信息技术 国际标准化配置文件 TB、TC、TD 和 Te 连接模式网络服务上的连接模式传输服务 第30部分：配置文件定义 TC1131

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-30:1995. 1 Scope 1.1 General ISO/IEC ISP 10609 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode Network Service. This part of ISO/IEC ISP 10609 defines the profile TC1131. The TC1131 profile is in the TC Group which supports Transport protocol classes 0 and 2.

Information technology - International Standardized Profiles TB, TC, TD and Te - Connection-mode Transport Service over connection-mode Network Service - Part 30: Definition of profile TC1131

CAN/CSA-ISO/IEC ISP 10608-12-1999(R2007) 信息技术 国际标准化概要 TAnnnn 无连接模式网络服务上的连接模式传输服务 第12部分：CSMA/Cd LAN 子网的 MAC 子层和物理层相关要求

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10608-12:1996. 1 Scope 1.1 General This part of ISO/IEC ISP 10608 is applicable to end systems and relay systems operating over CSMA/CD LAN subnetworks in the Open Systems Interconnection (OSI) environment. This part of ISO/IEC ISP 10608 specifies the subnetwork-type dependent requirements for the MAC sublayer and physical layer when the end system or relay system is attached to a CSMA/CD LAN subnetwork.

Information technology - International Standardized Profile TAnnnn - Connection-mode Transport Service over Connectionless-mode Network Service - Part 12: MAC sublayer and physical layer dependent requirements for a CSMA/Cd LAN subnetwork

CAN/CSA-ISO/IEC ISP 10609-7-1999(R2007) 信息技术 国际标准化配置文件 TB、TC、TD 和 TE 连接模式网络服务上的连接模式传输服务 第7部分：配置文件定义 TD1111/TD1121

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-7:1992. 1. Scope 1.1 General This part of ISO/IEC ISP 10609 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode Network Service. ISO/IEC ISP 10609 is applicable to the provision of the connection-mode Transport Service in end systems attached to any type of subnetwork from which the standardized connection-mode Network Service can be made available. This part of ISO/IEC ISP 10609 specifies the definition of Profiles TD1111/TD1121. The TD1111/TD1121 are profiles in the TD group which uses Transport protocol class 0. 1.2 Position of Profiles within the Taxonomy ISO/IEC ISP 10609 covers the taxonomy elements identified as "TB, TC, TD and TE" in the "Directory of Profiles and ISPs" contained in ISO/IEC TR 10000-2. This part of ISO/IEC ISP 10609 specifies the definition of Profiles TD1111/TD1121. These profiles may be combined with any A-profile at the A/T boundary. 1.3 Scenario Figure 1 illustrates the end system configurations to which TD1111/TD1121 profiles are applicable. This part of ISO/IEC ISP 10609 specifies the required functions from the supporting protocol stack shown in tables 1 and 2. This part of ISO/IEC ISP 10609 does not specify the required functions for relays.

Information technology - International Standardized Profiles TB, TC, TD and TE - Connection-mode Transport Service over connection-mode Network Service - Part 7: Definition of profiles TD1111/TD1121

CAN/CSA-ISO/IEC ISP 10608-4-1999(R2007) 信息技术 国际标准化配置文件 TAnnnn 无连接模式网络服务上的连接模式传输服务 第4部分：配置文件 TA53 的定义 在令牌环 LAN 子网上的操作

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10608-4:1994. 1 Scope 1.1 General ISO/IEC ISP 10608 is applicable to End Systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards which collectively provide the connection-mode Transport Service using the connectionless-mode Network Service. This part of ISO/IEC ISP 10608 is applicable to the provision of the connection-mode Transport Service in End Systems attached to a Token Ring LAn subnetwork from which the standardized connectionless-mode Network Service can be made available.

Information technology - International Standardized Profile TAnnnn - Connection-mode Transport Service over Connectionless-mode Network Service - Part 4: Definition of profile TA53, operation over a Token Ring LAN subnetwork

CAN/CSA-ISO/IEC ISP 10609-44-1999(R2008) 信息技术 国际标准化配置文件 TB、TC、TD 和 Te 连接模式网络服务上的连接模式传输服务 第44部分：配置文件的定义 TD43111

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-44:1995. 1 Scope 1.1 General ISO/IEC ISP 10609 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode Network Service. This part of ISO/IEC ISP 10609 defines the profile TD43111. The TD43111 profie is the TD Group which supports Transport protocol class 0. 1.2 Position within the taxonomy The taxonomy of OSI profiles is defined in ISO/IEC TR 10000-2. This part of ISO/IEC ISP 10609 defines the profile: TD43111 Connection-mode Transport Service over connection-mode Network Service over ISDN - Packet mode service - D-channel access - Virtual Call (VC) without use of Q.931 This profile may be combined with any A-profile at the A/T boundary.

Information technology - International Standardized Profiles TB, TC, TD and Te - Connection-mode Transport Service over connection-mode Network Service - Part 44: Definition of profile TD43111

CAN/CSA-ISO/IEC ISP 10609-47-1999(R2008) 信息技术 国际标准化配置文件 TB、TC、TD 和 Te 连接模式网络服务上的连接模式传输服务 第47部分：配置文件的定义 TD43212

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-47:1995. 1 Scope 1.1 General ISO/IEC ISP 10609 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode Network Service. This part of ISO/IEC ISP 10609 defines the profile TD43212. The TD43212 profie is the TD Group which supports Transport protocol class 0. 1.2 Position within the taxonomy The taxonomy of OSI profiles is defined in ISO/IEC TR 10000-2. This part of ISO/IEC ISP 10609 defines the profile: TD43212 Connection-mode Transport Service over connection-mode Network Service over ISDN - Packet mode service - B-channel permanent access - Virtual Call (VC) without use of Q.931 NOTE - At the date of publication, there is no difference from a terminal point of view between "permanent" and "semi-permanent" connections. However, ITU-T may define a procedure that would allow an ISDN terminal to have a semi-permanent connection set up in support of permanent B-channel. At that time, amendments to this profile may be necessary. This profile uses the term "permanent". This profile may be combined with any A-profile at the A/T boundary.

Information technology - International Standardized Profiles TB, TC, TD and Te - Connection-mode Transport Service over connection-mode Network Service - Part 47: Definition of profile TD43212

GOST R ISO/IEC TR 10000-1-1999 信息技术.国际标准化数据的框架和分类系统.第1部分:总则和文档化框架

Настоящий стандарт определяет концепцию профилей и способ, которым они документируются в международных функциональных стандартах. Станд

Information technology. Framework and taxonomy of International Standardized Profiles. Part 1. General principles and documentation framework

GOST R ISO/IEC ISP 11185-11-1999 信息技术.国际标准化的FVT2nn数据.虚拟终端基础级别.控制对象类型定义的注册机构.第11部分:FVT232.标页码的FEPCO(栏登陆引导控制对象)No.1

Концепция профилей ВОС и структура функциональных стандартов определены в ГОСТ Р ИСО/МЭК ТО 10000-1. Такие профили подразделяются на классы и

Information technology. International Standardized Profiles FVT2nn. Virtual Terminal Basic Class. Register of control object type definitions. Part 11. FVT232. Paged FEPCO (Field Entry Pilot Control Object) No.1

GOST R ISO/IEC ISP 11185-10-1999 信息技术.国际标准化的FVT2nn数据.虚拟终端基础级别.控制对象类型定义的注册机构.第10部分:FVT231.FEPCO窗体(栏登陆引导控制对象)No.1

Настоящий стандарт определяет тип объекта управления макетами ввода в поле (ОУМВП), который представляет реальные средства при вводе данн

Information technology. International Standardized. Profiles FVT2nn. Virtual Terminal Basic Class. Register of control object type definitions. Part 10. FVT231. Forms FEPCO (Field Entry Pilot Control Object) No.1

GOST R ISO/IEC ISP 11185-9-1999 信息技术.国际标准化的FVT2nn数据.虚拟终端基础级别.控制对象类型定义寄存器.第9部分:FVT222-标页码的FEICO(栏登陆指令控制对象)No.1

Настоящий стандарт определяет тип объекта управления инструкциями ввода в поле (ОУИВП), который предоставляет реальные возможности для л

Information technology. International standardized. Profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. Part 9. FVT222 - Paged FEICO ( Field entry instruction control object) No.1

GOST R ISO/IEC TR 10000-3-1999 信息技术.国际标准化数据的框架和分类系统.第3部分:开放系统环境数据的准则和分类系统

Настоящий стандарт устанавливает применение основ функциональной стандартизации в части среды открытых систем (СОС). Стандарт определяе

Information technology. Framework and taxonomy of International Standardized Profiles. Part 3. Principles and taxonomy for open system environment profiles

GOST R ISO/IEC TR 10000-2-1999 信息技术.国际标准化数据的框架和分类系统.第2部分:OSI数据的准则和分类系统

Настоящий стандарт определяет общие принципы и классификационную схему (таксономию) профилей ВОС, которые могут быть или были представле

Information technology. Framework and taxonomy of International Standardized Profiles. Part 2. Principles and taxonomy for OSI profiles

ISO/IEC ISP 10611-6:1998 信息技术.国际标准化轮廓AMH1n.信息处理系统.通用信息.第6部分:

Information technology — International Standardized Profiles AMH1n — Message Handling Systems — Common Messaging — Part 6:

DIN EN ISP 15124-1:1998 信息技术.FOD112 国际标准化的协议.开放式文件格式.图像应用.增强文件结构.字符、光栅制图和几何制图内容体系结构. 第1部分;文件应用协议(DAP)

This DAP specifies an interchange format suitable for transfer of structured documents between equipment designed for raster processing. The documents supported by this DAP are based on a paradigma of an electronic engineering drawing or illustration. Such documents contain one or more pages.

Information technology - International Standardized Profile FOD126; Open document format: Image applications; Enhanced document structure; Character, raster graphics, and geometric graphics content architecture - Part 1: Document Application Profile (DAP)

ISO/IEC 13236:1998 信息技术 服务质量:框架

This QOS Framework is a structured collection of concepts and their relationships which describes QOS (Quality of Service) and enables the partitioning of, and relationships between, the topics relevant to QOS in Information Technology (IT) to be expressed by a common means of description. In particular, this QOS Framework is directed at IT systems and their use in providing Open Distributed Processing services. This QOS Framework is intended to assist those designing and specifying IT systems, and those defining communications services and protocols, by providing guidance on QOS applicable to systems, services and resources of various kinds. It describes how QOS can be characterized, how QOS requirements can be specified, and how QOS can be managed. This QOS Framework defines terminology and concepts for QOS in IT. It introduces the concept of QOS characteristics, which represent the fundamental aspects of QOS that are to be managed in various ways; and it defines a number of QOS characteristics of particular importance. These definitions are independent of how QOS is represented or controlled in a real system. This Framework describes how QOS requirements can be expressed, and identifies a number of QOS mechanisms (such as three-party negotiation) that can be used as components of QOS management functions to meet QOS requirements of various kinds. It also describes the circumstances in which various combinations of mechanisms may be appropriate. This QOS Framework provides a basis for the specification of extensions and enhancements to existing or planned standards, as a result of the need for, and application of, the QOS concepts defined in this Recommendation | International Standard. It is not the intent of this Recommendation | International Standard to destabilise any existing Recommendations | International Standards; rather, it is intended that this QOS Framework may be used by: · developers of new or revised IT-related standards which define or use QOS mechanisms; and · IT users expressing requirements for QOS. This QOS Framework does not attempt to provide a basis for the specification of performance objectives or network signalling of QOS in public communications networks. The QOS aspects of these communications services are addressed by other ITU-T Recommendations. The intent of this Recommendation | International Standard is to provide a common vocabulary to both service providers and service users. Nothing in this Recommendation | International Standard should be construed as placing requirements on either service providers or service users. It is hoped that a common approach and vocabulary for QOS will assist multiple service providers to deliver end-to-end QOS to end-systems. This QOS Framework specifically excludes the detailed specification of QOS mechanisms. It is not the intent of this Recommendation | International Standard to serve as an implementation specification, to be a basis for appraising the conformance of implementations, or to define particular services and protocols. Rather, it provides a conceptual and functional framework for QOS which allows independent teams of experts to work productively on the development of Recommendations | International Standards. As applied to OSI, this QOS Framework is consistent with the OSI Basic Reference Model in that it describes operations and mechanisms which are assignable to layers as specified in the OSI Basic Reference Model. It is consistent with the OSI Management Framework (see ITU-T Rec. X.700 | ISO/IEC 7498-4) and the Systems Management Overview (see ITU-T Rec. X.701 | ISO/IEC 10040) in its assignment of functions to management entities. In Annex A, this QOS Framework presents a model of QOS for OSI which identifies the entities that participate in the management of QOS, defines the flow of QOS-related information between them and describes how this information is used.

Information technology - Quality of service: Framework