35.140 计算机图形技术 标准查询与下载

ANSI CGATS.5-2009 图形技术.图形工艺图象的光谱测量和比色计算

This standard establishes a methodology for reflection and transmission spectral measurement and colorimetric parameter computation for graphic arts images. Graphic arts includes, but is not limited to, the preparation of material for, and volume production by, production printing processes which include offset lithography, letterpress, flexography, gravure and screen printing.

Graphic technology - Spectral measurement and colorimetric computation for graphic arts images

ASTM E2641-09 安全三维成像技术最佳安全应用的标准实施规程

The overall purpose of standards is to document and communicate best practices in the successful and consistent application of 3D imaging technology. When executed effectively, this leads to an enhanced project performance. This practice offers a guideline for safe field operational procedures used in the application of 3D imaging technology. Applicability8212;As 3D imaging technology is applied across an ever increasing area of application, a set of uniform standards for their safe application is necessary. This best practice shall serve as a guideline to both operator and end user ensuring that necessary and reasonable precautions have been taken to ensure the safe application of 3D imaging technology. 1.1 This practice for the safe application of 3D imaging technology will focus primarily on the application of specific technology components common to 3D imaging systems. When appropriate, reference may be made to existing standards written for said technologies. 1.2 Safety standards relevant to specific industry practices where the technology may be applied will not be developed given the very broad potential for application over many industries. However, general mention and recommendations will be made to industry specific safety guidelines relevant to some common applications. 1.3 This practice covers the following topics: 1.3.1 End-user/operator responsibilities, 1.3.2 Safety plan, 1.3.3 Safety awareness, 1.3.4 Safe application of laser technology common to 3D imaging systems, and 1.3.5 References to some applicable government regulations. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Best Practices for Safe Application of 3D Imaging Technology

ANSI/INCITS/ISO/IEC 18025:2009 信息技术.环境数据编码规范(EDCS)

ISO/IEC 18025:2005 provides mechanisms to unambiguously specify objects used to model environmental concepts. To accomplish this, a collection of nine EDCS dictionaries of environmental concepts and a functional interface are specified.

Information technology - Environmental Data Coding Specification (EDCS)

ANSI/INCITS/ISO/IEC 18024-4:2009 信息技术.SEDRIS语言汇编.第4部分:C语言

ISO/IEC 18024-4:2006 specifies a language-dependent layer for the C programming language. ISO/IEC 18023-1 specifies a language-independent application program interface (API) for SEDRIS. For integration into a programming language, the SEDRIS API is embedded in a language-dependent layer obeying the particular conventions of that language.

Information technology - SEDRIS language bindings - Part 4: C

ANSI/INCITS/ISO/IEC 18023-1:2009 信息技术.SEDRIS语言汇编.第1部分:功能规范

ISO/IEC 18023-1:2005 addresses the concepts, syntax and semantics for the representation and interchange of environmental data. It specifies: a data representation model for expressing environmental data; specifications of the data types and classes that together constitute the data representation model; and an application program interface that supports the storage and retrieval of environmental data using the data representation model.

Information technology - SEDRIS language bindings - Part 1: Functional specification

ANSI/INCITS/ISO/IEC 18023-3:2009 信息技术.SEDRIS.第3部分:二进制编码传输格式

This part of ISO/IEC 18023 defines a binary encoding for DRM objects specified in ISO/IEC 18023-1 according to the abstract syntax specified in ISO/IEC 18023-2.

Information technology - SEDRIS - Part 3: Transmittal format binary encoding

ISO/IEC 19776-2:2008 信息技术.计算机图形、图像处理和环境数据表示.可扩展3D(X3D)编码.第2部分:传统VRML编码

Information technology - Computer graphics, image processing and environmental data representation - Extensible 3D (X3D) encodings - Part 2: Classic VRML encoding

ISO/IEC 19775-1:2008 信息技术.计算机制图和图像处理.可扩展3D(X3D).第1部分:体系结构和基本元素

Information technology - Computer graphics and image processing - Extensible 3D (X3D) - Part 1: Architecture and base components

ISO/IEC DIS 19777-3 信息技术《计算机图形和图像处理》《可扩展 3D（X3D）语言绑定》第3部分：C

Information technology — Computer graphics and image processing — Extensible 3D (X3D) language bindings — Part 3: C

ISO/IEC DIS 19777-5 信息技术《计算机图形和图像处理》《可扩展的 3D（X3D）语言绑定》第5部分：第5部分《C#

Information technology — Computer graphics and image processing — Extensible 3D (X3D) language bindings — Part 5: Part 5 — C#

ISO/IEC 19776-2:2005/Amd 1:2008 信息技术.计算机制图、图像处理和环境数据表示.可扩展的3D(X3D)编码.第2部分:典型的VRML编码.修改件1

This standard is Information technology - Computer graphics, image processing and environmental data representation - Extensible 3D (X3D) encodings - Part 2: Classic VRML encoding; Amendment 1.

Information technology - Computer graphics, image processing and environmental data representation - Extensible 3D (X3D) encodings - Part 2: Classic VRML encoding; Amendment 1

ISO/IEC DIS 19777-4 信息技术《计算机图形和图像处理》《可扩展 3D（X3D）语言绑定》第4部分：第4部分《C++

Information technology — Computer graphics and image processing — Extensible 3D (X3D) language bindings — Part 4: Part 4 — C++

DS/ISO/IEC 8632-1/Corr. 1:2008 信息技术计算机图形学图片描述信息存储和传输的图元文件第1部分：功能规范

The Computer Graphics Metafile provides a file format suitable for the storage and retrieval of picture information. The file format consists of a set of elements that can be used to describe pictures in a way that is compatible between systems of different architectures and devices of differing capabilities and design.

Information technology - Computer graphics - Metafile for the storage and transfer of picture description information - Part 1: Functional specification

DS/ISO/IEC 8632-1/Corr. 2:2008 信息技术计算机图形学图片描述信息存储和传输的图元文件第1部分：功能规范

The Computer Graphics Metafile provides a file format suitable for the storage and retrieval of picture information. The file format consists of a set of elements that can be used to describe pictures in a way that is compatible between systems of different architectures and devices of differing capabilities and design.

Information technology - Computer graphics - Metafile for the storage and transfer of picture description information - Part 1: Functional specification

ANSI/INCITS/ISO/IEC 19775-1:2008 信息技术.计算机图形和图像处理.可扩展3D(X3D).第1部分:体系结构和基础部件

ISO/IEC 19775-1:2008 does not define physical devices or any other implementation-dependent concepts (e.g., screen resolution and input devices). It is intended for a wide variety of devices and applications, and provides wide latitude in interpretation and implementation of the functionality.

Information technology - Computer graphics and image processing - Extensible 3D (X3D) - Part 1: Architecture and base components

ASTM D6959-08 装订产品制图设备用数据交换格式的标准实施规程

This practice provides a common format that allows a computer design system to generate data that an output device can accurately reproduce independent of the hardware manufacturer.1.1 This practice describes a data format for transferring information from a sewn product computer aided design software program to a device that produces physical output, typically in the form of a printed or drawn image on paper. 1.2 This practice is based on a subset of the Hewlett Packard Graphics Language HPGL/2. Supported syntax and limitations are listed in 7.2. Unsupported syntax is listed in X1.1. 1.3 This practice only supports X-Y vector data and a limited set of additional functions. No provision is made to support bitmap/raster data used in applications like inkjet printing. 1.4 This practice supports a single system of units, an image fixed at 100 % scale and 1:1 aspect ratio. Scaling and custom unit systems are not supported. 1.5 This practice does not support curve interpolation or definitions. All curves are represented by discrete vectors (stroked) and are dependent on the resolution of the CAD software. 1.6 This practice requires that all coordinates are absolute, not relative, as defined in the HPGL/2 reference. 1.7 This practice only supports positive coordinates that are measured from a single X-Y origin point with coordinates 0,0. 1.8 This practice only supports fixed width fonts. Variable width fonts are not supported. 1.9 This practice intends to transfer a static image with no provision for editing. 1.10 This practice assumes monochromatic output. It does not support implied output colors. 1.11 This practice imposes no limits on the width or length of the plot data. Physical limitations imposed by the hardware and their effects on the output are the responsibility of the hardware manufacturer. 1.12 This practice does not support frame advance commands or any methods that insert multiple origin points or floating coordinate systems. 1.13 This practice limits the plot file to contain a single block of data demarked by a compatible header and terminator. Multiple blocks of data in a single file are not allowed. 1.14 The intended application of this practice is limited to the class of output devices found in the sewn product industries that produce apparel, textiles, upholstery, and others that use soft or semi-rigid materials. 1.15 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Data Exchange Format for Sewn Product Plotting Devices

ANSI/INCITS/ISO/IEC 19777-2:2008 信息技术.计算机制图和图像处理.可扩展3D(X3D)语言汇编.第2部分:Java

The Extensible 3D (X3D) specification, ISO/IEC 19775, specifies a language-independent application programmer interface (API) to a set of services and functions. For integration into a programming language, the X3D abstract interfaces are embedded in a language dependent layer obeying the particular conventions of that language. ISO/IEC 19777-2:2006 specifies such a language-dependent layer for the Java programming language.

Information technology - Computer graphics and image processing - Extensible 3D (X3D) language bindings - Part 2: Java

ANSI/INCITS/ISO/IEC 9593-4/AMD 2:2008 信息技术.计算机图形.程序员分级交互图形系统(PHIGS)语言汇编.第4部分:C语言.修改件2:三维图形系统(PHIGS)修改件的合并

Information technology - Computer graphics - Programmers Hierarchical Interactive Graphics System (PHIGS) language bindings - Part 4: C' AMENDMENT 2: Incorporation of PHIGS amendments

KS X ISO/IEC 12087-5-2007(2022) 信息技术计算机图形和图像处理图像处理和交换功能规范第5部分:基本图像交换格式

Information technology－Computer graphics and image processing－Image Processing and Interchange(IPI)－Functional specification－Part 5：Basic Image Interchange Format(BIIF)

KS X ISO/IEC 12087-5-2007(2017) 信息技术计算机图形和图像处理图像处理和交换（IPI）功能规范第5部分:基本图像交换格式（BIIF）

Information technology－Computer graphics and image processing－Image Processing and Interchange(IPI)－Functional specification－Part 5：Basic Image Interchange Format(BIIF)