35.180 IT终端和其他外围设备 标准查询与下载

ARINC 644A-1996 便携式多用途接入终端

Portable Multi-Purpose Access Terminal (PMAT)

Portable Multi-Purpose Access Terminal (PMAT)

ANSI/ISO/IEC 11160-2:1996 信息技术.办公设备.说明书中包含的最少量信息.第2部分:被INCITS采用的3类和4类打印机

This part of ISO/IEC 11160 specifies the minimum information that is to be included in the specification sheets of printers so that users may compare the characteristics of different machines and select a printer which meets their requirements. ISO/IEC 11160 will accommodate different classes of printers. This part covers Class 3 and Class 4 printers, as defined in annex B.

Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 2: Class 3 and Class 4 printers Adopted by INCITS

ANSI/ISO/IEC 11160-1:1996 信息技术.办公设备.说明书中包含的最少量信息.第1部分:被INCITS采用的1类和2类打印机

This part of ISO/IEC 11160 specifies the minimum information that is to be included in the specification sheets of printers so that users may compare the characteristics of different machines and select a printer which meets their requirements. ISO/IEC 11160 will cover different classes of printers. This part covers Class 1 and Class 2 printers, as defined in annex A.

Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 1: Class 1 and Class 2 printers Adopted by INCITS

ITU-T V.56TER-1996 评估 2 线 4 kHz 语音频带双工调制解调器的测试程序

Test procedure for evaluation of 2-wire 4 kHz voiceband duplex modems

ISO/IEC 11160-2:1996 信息技术.办公设备.规格张中含有的最少信息.打印机.第2部分:3类和4类打印机

Specifies the minimum information that shall be included in the specification sheets of printers enabling users to compare the characteristics of different machines and select a suitable printer. Applies to Class 1 and Class 2 printers according annex A for an office environment.

Information technology - Office equipment - Minimum information to be included in specification sheets - Printers - Part 2: Class 3 and class 4 printers

CNS 13741.4-1996 虚拟终端机–通用远程签入之同步、信号、协商、子协商控制对象

Virtual Terminal (VT) Generalized Telnet Synch,Signal,Negotiation and Subnegotiation Control Object

CNS 13741-4-1996 虚拟终端机–通用远程签入之同步、信号、协商、子协商控制对象

本标准规定虚拟终端机通用远程签入之同步控制对象、信号控制对象、协商控制对象及子协商控制对象。本标准属于在交换格式及表示规范中的虚拟终端机已注册对象子类别。备考：子类别之规范由 FVTabc 型式来识别，其中 abc 是结构化数字代表求同之分类。其意义为 abc 分辨不同资

Virtual Terminal (VT) Generalized Telnet Synch,Signal,Negotiation and Subnegotiation Control Object

CNS 13741-2-1996 虚拟终端机–异步模式透通的虚拟终端机环境规范

本标准规定异步模式透通的虚拟终端机环境规范，本标准可用来完全模拟远程签入的虚拟终端机环境。本标准属于需要连接型传送服务（Connection-mode Transport Services）之交换格式及表示规范中的虚拟终端机已注册对象之子类别。备考：子类别之规定由 FVT abc 型式来识别，其

Virtual Terminal (VT)-A-mode Transparent VTE-Profile

CNS 13741.2-1996 虚拟终端机–异步模式透通的虚拟终端机环境规范

Virtual Terminal (VT)-A-mode Transparent VTE-Profile

PD 7020-1996 公共通信网络双线模拟语音频带租赁线连接终端设备的基本要求

Essential requirements for terminal equipment intended for connection to 2-wire analogue speechband leased lines of the public telecommunications network

PD 7021-1996 公共电信网络4条模拟语音频带租赁线连接终端设备的基本要求

Essential requirements for terminal equipment intended for connection to 4-wire analogue speechband leased lines of the public telecommunications network

PD 7028-1996 公共通信网络模拟基带租赁线连接终端设备的基本要求

Essential requirements for terminal equipment intended for connection to analogue baseband leased lines of the public telecommunications network

AIIM MS59-1996 对数字数据光盘上存储的数据进行媒体错误监测和报告技术

This recommended practice describes operational and quality control guidelines for alphanumeric computeroutput microfilm recorders and microforms using black-and -white film as well as duplicates made from such filmes.

Media Error Monitoring and Reporting Techniques for Verification of Stored Data on Optical Digital Data Disks

ANSI/INCITS/ISO/IEC 11160-2:1996 信息技术.办公设备.规格表单中含有的的最低限度信息.打印机.第2部分:3类和4类打印机

This part of ISO/IEC 11160 specifies the minimum information that is to be included in the specification sheets of printers so that users may compare the characteristics of different machines and select a printer which meets their requirements. ISO/IEC 11160 will accommodate different classes of printers. This part covers Class 3 and Class 4 printers, as defined in annex B.

Information Technology - Office Equipment - Minimum information to be included in specfication sheets - Printers - Part 2: Class 3 and Class 4 Printers

ANSI/INCITS/ISO/IEC 11160-1:1996 信息技术.办公设备.规格张中含有的最少信息.打印机.第1部分:1类和2类打印机

This part of ISO/IEC 11160 specifies the minimum information that is to be included in the specification sheets of printers so that users may compare the characteristics of different machines and select a printer which meets their requirements. ISO/IEC 11160 will cover different classes of printers. This part covers Class 1 and Class 2 printers, as defined in annex A.

Information Technology - Office Equipment - Minimum Information to be Included in Specification Sheets - Printers - Part 1: Class 1 and Class 2 Printers

ASTM F1706-96(2008)e1 测定非击打式印刷机能量消耗的标准规程

This practice provides a procedure for measuring the energy consumption of the product and associated accessories in various operating modes. It does not reflect the total energy required to produce a page. It does not, for example, include the energy required to manufacture the paper or the machine. It is intended to determine the energy requirements of products by a method that will permit accurate energy efficiency comparisons with similar products.1.1 This practice covers a procedure by which nonimpact personal computer printers, accessories, and similar office imaging devices can be tested for energy consumption. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining Energy Consumption of Nonimpact Personal Computer Printers

ASTM F1707-96(2008)e1 传真机能耗测定的标准实施规程

This practice provides a procedure for measuring the energy consumption of the product and associated accessories in various operating modes. It does not reflect the total energy required to produce a page. It does not, for example, include the energy required to manufacture the paper or the machine. It is intended to permit rating the energy requirements of products by a method that will permit accurate energy efficiency comparisons with similar products.1.1 This procedure provides a method by which electrophotographic, direct-thermal, thermal transfer, or ink-jet facsimile machines can be tested for energy consumption. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining Energy Consumption of Facsimile Machines

ANSI/EIA 675:1996 小型33.0mm(1.8英寸)的磁盘驱动器(SP-3557-A)规范

Defines the dimensions of 33.0mm (1.2 in) small form factor disk drives

Specification for Small Form Factor 33.0 mm (1.3 in) Disk Drives (SP-3557-A)

AS/NZS 4395.5:1996 信息技术．文本和办公系统键盘配置．编辑区

Specifies the editing section, the cursor zone and the allocation of functions to its keys. This Standard is identical with and has been reproduced from ISO/IEC 9995-5:1994.

Information technology - Keyboard layouts for text and office systems - Editing section

AS/NZS 4395.3:1996 信息技术．文本和办公系统键盘配置．字母数字区的字母数字分区互补配置

Specifies a set of graphic characters which, when used in combination with an existing national version keyboard layout, allows the input of the full graphic character repertoire defined in AS 2793. This Standard is identical with and has been reproduced

Information technology - Keyboard layouts for text and office systems - Complementary layouts of the alphanumeric zone of the alphanumeric section