35.220.23 盒式磁带和磁带盒 标准查询与下载

NF Z64-762:1988 信息处理. 使用以394ftpmm(10000ftpi)39cpmm(1000 CPI)速度在6.3mm(0,25 IN)盒式磁带录制的数据交换.第2部分:流方式

Information processing. Data interchange on 6,30 mm (0,25 in) magnetic tape cartridge using gcr recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1000 cpi). Part 2 : streaming mode.

BS 4783-4:1988 数据处理和信息存储用介质的储存、传送和维护.第4部分:磁带盒和盒式磁带机推荐标准

Care and maintenance of tape cartridges and cassettes including storage, handling, transportation, inspection, maintenance and fault identification.

Storage, transportation and maintenance of media for use in data processing and information storage - Recommendations for magnetic tape cartridges and cassettes

NAVY MIL-T-5661 E-1988 棉制纺织品的磁带和带状织物

This Specification covers f i v e types o f woven cotton r e i n for c i n g t e x t i l e tape and webbing intended for use i n the manufacture of aeronautical equipment.

TAPE AND WEBBING, TEXTILE, WOVEN REINFORCING, COTTON

DIN 66212:1988 信息处理用的3.81 mm 磁带盒.已记录的磁带

Magnetic tape cassette for information processing, width 3,81 mm; recorded tape

DIN 66211-2:1988 信息处理用宽度为 3.81 mm 的盒式磁带.第2部分:磁带的电磁性能

This standard specifies the electromagnetic properties of the magnetic tape with tape width 3,81 mm of the magnetic tape cassette for information processing and at density of 63 ftpmm and provides their tests.#,,#

Magnetic tape cassette for information processing, tape width 3,81 mm; electromagnetic properties of the magnetic tape

DIN 66211-1:1988 信息处理用的 3.81 mm带宽磁带盒.机械性能

This standard specifies the dimensional and the mechanical characteristics of the magnetic tape cassette with tape width 3,81 mm, so as to provide interchangeability between data processing systems.

Magnetic tape cassette for information processing, tape width 3,81 mm; mechanical properties

NAVY MIL-STD-1697 VALID NOTICE 1-1988 一个半英寸盒式录像带播放格式磁带

Military Standard MIL-STD-l697(BC), dated 24 February. 1978, has been reviewed and determined to be current.

TAPE, ONE-HALF INCH VIDEO CASSETTE BROADCAST FORMAT

NF Z64-731:1987 信息处理.以252 ftpmm(6400 ftpi)进行信息记录的6.30 mm(0.25in)道盒式磁带上的数据交换.第1部分:物理、机械和磁性能

Information processing. Data interchange on 6,30 mm (0,25 in) magnetic tape cartridge using imfm recording at 252 ftpmm (6400 ftpi). Part 1 : mechanical, physical and magnetic properties.

NF Z64-732:1987 使用252ftp/mm(16400ftpi)的强度调制和频率调制(IMFM)盒式磁带的数据交换.第2部分:起始/终止状态数据交换的磁道排列格式和录制方法

INFORMATION PROCESSING. DATA INTERCHANGE ON 6,30 MM (0,25 IN) WIDE MAGNETIC TAPE CARTRIDGE USING IMFM RECORDING AT 252 FTPMM (6400 FTPI). PART 2 : TRACK FORMAT AND METHOD OF RECORDING FOR DATA INTERCHANGE IN START/STOP MODE.

ANSI/INCITS 158-1987 信息系统.信息交换用已记录盒式磁带.4道、0.150英寸(3.81 mm)、8000bpi(315 bpmm)群码记录

This American National Standard is intended to provide a format and recording standard for an 8000-bpi(315-bpmm) streaming 0.150-inch (3.81-mm)-wide, 4-track magnetic tape cassette to be used for information interchange among information processing systems, communication systems, and associated equipment utilizing a standard code for interchange, as agreed upon by the interchange parties.

Information Systems - Recorded Magnetic Tape Cassette for Information lnterchange - 4 Track, 0.150 Inch (3.81 mm) 8000 bpi (315 bpmm), Group Code Recording

NF Z64-155:1987 信息处理.磁带暗盒6.30mm(0.25in),相信位编码63bpmm(1600bpi)的数据交换

Information processing. Data interchange on 6,30 mm (0,25 in) magnetic tape cartridge, 63 bpmm (1600 bpi) phase-encoded.

ANSI/INCITS 127-1987 信息系统.信息互换用0.250英寸(6.30mm)、6400-10000ftpi(252-394tpmm)未记录的盒式磁带 代替ANSI X3.127-1987

Presents the minimum requirements for an unrecorded cartridge containing 0.250-inch (6.30-mm) wide magnetic tape regarding the mechanical and magnetic interchangeability of the cartridge between information processing systems, using physical recording densities in the range of 6400 to 10 000 flux transitions per inch (ftpi) (252 to 394 flux transitions per millimeter (ftpmm)).

Information Systems - Unrecorded Magnetic Tape Cartridge for Information Interchange - 0.250 Inch (6.30 mm), 6400 - 10 000 ftpi (252-394 ftpmm) Replaces ANSI X3.127-1987

ISO 8063-1:1986 信息处理 数据交换用6.30mm(0.25 in)宽,密度为252 ftpmm(6400 ftpi)IMFM制记录的盒式磁带 第1部分:机械性能、物理性能和磁性能

Prescribes the dimensional, physical and magnetic characteristics and the track layout of a magnetic tape cartridge with a tape width of 6,30 mm (0,25 in) for data interchange between data processing systems using IMFM recording at 252 ftpmm (6 400 ftpi).

Information processing; Data interchange on 6,30 mm (0.25 in) wide magnetic tape cartridge using IMFM recording at 252 ftpmm (6 400 ftpi); Part 1 : Mechanical, physical and magnetic properties

ISO 8063-2:1986 信息处理 数据交换用6.30mm(0.25 in)宽,密度为252 ftpmm(6400 ftpi)IMFM制记录的盒式磁带 第2部分:以起止模式进行数据交换的磁道格式和记录方式

Specifies the quality of recorded signals as well as the track format of a magnetic tape cartridge with a magnetic tape width of 6,30 mm (0,25 inch) using the IMFM method of recording at 252 ftpmm (6 400 ftpi) for data interchange between data processing systems in the start/stop mode.

Information processing; Data interchange on 6,30 mm (0.25 in) wide magnetic tape cartridge using IMFM recording at 252 ftpmm (6 400 ftpi); Part 2 : Track format and method of recording for data interchange in start/stop mode

ISO 4057:1986 信息处理 数据交换用6.30mm(0.25 in)宽盒式磁带,63 bpmm(160 bpi)调相制

Outlines the characteristics of a 6.30 mm (0,25 in) magnetic tape cartridges intended for data interchange and physical interchangeability between information processing systems utilizing the ISO 7-bit coded character set (ISO 646), its extensions (ISO 2022) and/or 8-bit character set (ISO 4873). The cartidge is of the twin-hub coplanar type, loaded with 6,30 mm (0,25 in) magnetic tape tor digital recording using the 53 bpmm (1600 bpi) phase-encoding method.

Information processing; Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase-encoded

ANSI/INCITS 56-1986 信息系统.信息交换用记录磁带盒.4道,0.250 Inch(6.30 mm),1600 bpi(63 bpmm),相位编码 代替X3.56-1986 [被代替:ANSI X3.56,ANSI X3.56]

Provides a format and recording standard for a 0.250-in (6.30-mm) wide 4-track, magnetic tape in a cartridge to be used for information interchange between information processing systems, communication systems, and associated equipment utilizing a standard code, as agreed upon by the interchange parties.

Information Systems - Recorded Magnetic Tape Cartridge for Information Interchange - 4 Track, 0.250 Inch (6.30 mm), 1600 bpi (63 bpmm), Phase Encoded Replaces X3.56-1986 [Replaced: ANSI X3.56, ANSI X3.56]

ISO 8462-1:1986 信息处理 数据交换用6.30mm(0.25 in)宽,密度为394 ftpmm(10000 fpti)、39 cpmm(1000 cpi)成组编码记录的盒式磁带 第1部分:机械性能、物理性能和磁性能

ISO 8462 specifies the characteristics of a tape cartridge loaded with magnetic tape 6,30 mm (0.25 in) wide intended for digital recording at physical recording densities of 252 ftpmm (6 400 ftpi) and 394 ftpmm (10 000 ftpi). ISO 8462/2 specifies a recording method and a data format in-tended for use in the streaming mode of operation. Two alter-native track formats are specified : — a 4-track format, and — a 9-track format. This part of ISO 8462 specifies the mechanical, physical and magnetic properties of a 6,30 mm (0.25 in) wide magnetic tape cartridge and methods for testing the surface quality of the tape. It also specifies the environmental conditions under which the cartridge shall be tested and operated, and recommends condi-tions for storage. ISO 8462/1 and ISO 8462/2 provide for the physical inter-change of cartridges between data processing systems, anc specify a data format. A labelling standard for tape cartridges used in the streaming mode is under study. The availability of such a labelling standard will provide for full data interchange between data processing systems. NOTE — Numeric values in the SI and/or Imperial measurement system in this part of ISO 8462 may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should be neither intermixed nor reconverted. The original design was made using the imperial measurement system.

Information processing; Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi); Part 1 : Mechanical, physical and magnetic properties

ISO 8462-2:1986 信息处理 数据交换用6.30mm(0.25 in)宽,密度为394 ftpmm(10000 fpti)、39 cpmm(1000 cpi)成组编码记录的盒式磁带 第2部分:流式

Specifies the recording method and a data format for the use of the streaming operating mode for a 7-track format and a 9-track format. Provides for the physical interchange of cartridges between data processing systems. Such a cartridge conforms with ISO 8462 if it meets all requirements for the parts 1 and 2 for the 4-track format and the 9-track format. References: ISO 646, 2022, 4873 and 8462/1.

Information processing; Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi); Part 2 : Streaming mode

ANSI/INCITS 116-1986 信息系统.信息互换用4道、串行、0.25英寸(6.30mm)、6000 bpi(252bpmm)的可逆改型的调频编码的已记录的盒式磁带 代替ANSI X3.116-1986

This American National Standard is intended to provide a format and recording standard for a 0.250-inch (6.30-mm) wide, 4-track magnetic tape in a cartridge to be used for information interchange between information processing systems, communications systems, and associated equipment utilizing a standard code for information interchange, as agreed upon by the interchange parties.

Information Systems - Recorded Magnetic Tape Cartridge for Information Interchange - 4-Track, Serial, 0.250 Inch (6.30 mm), 6400 bpi (252 bpmm), Inverted Modified Frequency Modulation Encoded Replaces ANSI X3.116-1986

ANSI/INCITS 48-1986 PE、32bpmm(800bpi)、3.81mm (0.150英寸)、信息交换用盒式磁带(包括ANSI X3.48/TC-1-1995)(以前为ANSI X3.48-1986 (R1997))

This American National Standard for unrecorded and recorded cassettes containing 3.81-mm (0.150-in) -wide magnetic tape presents the minimum requirements for mechanical and magnetic interchangeability of the cassette and for data interchange between information processing systems, which are capable of utilizing a standard code for information interchange as agreed upon by the interchange parties, using a data density of 32 bpmm (800 bpi).

Information Systems - Magnetic Tape Cassettes for Information Interchange - 3.81 -mm (0.150-in) Tape at 32 bpmm (800 bpi), Phase Encoded formerly ANSI X3.48-1986