35.220.23 盒式磁带和磁带盒 标准查询与下载

ANSI/INCITS 136-1986 信息交换用、4道和9道、0.250英寸(6.30mm)、8000bpi(315bpmm)的流式组编码记录、连续记录盒式磁带

Provides a format and recording standard for an 8000-bpi (315-bpmm) streaming 0.250-inch (6.3-mm) wide, 4- and 9-track, magnetic tape in a cartridge to be used for information interchange between information processing systems, communication systems, and associated equipment utilizing a standard code for information interchange, as agreed upon by the interchange parties.

Serial Recorded Magnetic Tape Cartridge for Information Interchange, Four and Nine Track, 0.250 Inch (6.30 mm), 8000 bpi (315 bpmm), Streaming Mode, Group Code Recording

ISO 6098:1984 信息处理 12.7mm(0.5 in)宽磁带的自装磁带夹

Describes mechanical and functional interchangeability requirements for self-loading cartridges, to be used with reels of 12,7 mm (0.5 in) wide magnetic tape spedified in ISO 1864. Minimum dimensional and functional requirements of the cartridge are given to ensure their interchangeability between tape drives designed for self-loading operation. Different dimensions and features are recommended and optional.

Information processing; Self-loading cartridges for 12,7 mm (0.5 in) wide magnetic tape

NAVY MIL-S-85634-1984 反暴露工作服煤层磁带＆补丁热密封

This specification covers the requirements for a seam and patch sealing machine, for use in the modification and repair of f l y e r ' s anti-exposure coveralls.

SEALER, HEAT, SEAM TAPE& PATCH, ANTI EXPOSURE COVERALL

ANSI/INCITS 115-1984 信息系统.使用370tpi和6000tpi的非格式化的80兆字节三叉组件.物理和磁特性通用要求 代替ANSI X3.115-1984

Specifies the general, physical and magnetic requirements for interchangeability of the five disk pack, as required to achieve unrecorded pack interchange between disk storages and associated information processing systems.

Information Systems - Unformatted 80-Megabyte Trident Pack for Use at 370 tpi and 6000 bpi - General, Physical, and Magnetic Requirements Replaces ANSI X3.115-1984

ISO 3407:1983 信息处理 信息交换用3.81mm(0.150 in)盒式磁带以4 cpmm(100 cpi)、63 ftmm(1600 ftpi)调相记录

Defines the characteristics of a 3.81 mm (0.150 in) magnetic tape cassette to provide data interchange and physical interchangeability between information processing systems utilizing the ISO 7-bit coded character set (ISO 646) and its extensions (ISO 2022). The cassette is of the twin hub coplaner type, loaded with 3.81 mm (0.150 in) wide magnetic tape for digital recording using the 31.5 bits per mm (800 bpi) phase encoding method. The direction of magnetization is in the longitudinal direction of the tape.

Information processing; Information interchange on 3,81 mm (0.150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1 600 ftpi)

ANSI/INCITS 103-1983 信息系统.信息互换用共面3.81mm(0.150英寸)未记录的微型盒式磁带 代替ANSI X3.103-1983

This standard is for an unrecorded minicassette containing 3.81-mm (0.15-in) magnetic tape represents the minimum requirements for mechanical and magnetic interchangeability of the minicassette between information processing systems, communications systems, and associated equipment, using ASCII, ANSI X3.4-1977. This standard refers solely to the magnetic tape minicassettes for digital recording. It will support American National Standards for recorded minicassettes.

Information Systems - Unrecorded Magnetic Tape Minicassette for Information Interchange, Coplanar 3.81 mm (0.150 in) Replaces ANSI X3.103-1983

ISO 6098:1982 信息处理.12.7mm（0.5in）宽磁带用自装盒式磁带

Information processing — Self-loading cartridges for 12,7 mm (0.5 in) wide magnetic tape

NAVY MIL-HDBK-228 A-1982 溶剂活化及杂项磁带压力敏感的胶粘剂

This handbook contains the intended use, description, method of application, and national stock numbers of active items, of l i m i t e d and f u l l y coordinated federal and Military specifications covering pressure-sensitive, solvent activated, and miscellaneous tapes.

PRESSURE-SENSITIVE ADHESIVE, SOLVENT ACTIVATED AND MISCELLANEOUS TAPES

JIS X 0602:1982 信息互换用盒式磁带的标记与文档结构

この規格は，情報交換用媒体として使用する磁気カ七ットテープのラべルとププイル構成について規定する。

Magnetic tape cassette labelling and file structure for information interchange

BS 5079:1981 记录密度为4C/mm(100C/in)、相位编码密度为63ft/mm(1600ft/in)、宽3.81mm(0.150in)的盒式磁带信息交换规范

Specifies a 3.81 mm tape in a cassette to be physically interchangeable between information processing systems for the exchange of data using the UK 7-bit data code (BS 4730) or any 7-bit or 8-bit code structure (BS 4953).

Specification for information interchange on 3.81 mm (0.150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1600 ftpi)

ANSI/INCITS 85-1981 利用自行载入式磁带盒进行1/2-Inch磁带交换 代替ANSI X3.85-1981 [被代替:ANSI X3.85,ANSI X3.85]

This standard provides the information necessary to allow physical interchange of a self-loading cartridge to be used with 1/2-inch-wide magnetic tape, as described in American National Standard for Unrecorded Magnetic Tape for Information Interchange (9-Track 200 and 800 CPI, NRZI, 1600 CPI, PE), ANSI x3.40-1976, and modified herein, when contained in a self-loading cartridge.

1/2-Inch Magnetic Tape Interchange Using a Self-Loading Cartridge Replaces ANSI X3.85-1981 [Replaced: ANSI X3.85, ANSI X3.85]

ANSI/INCITS 72-1981 信息交换用并行记录磁带盒,4道,0.250 Inch(6.30 mm),1600 bpi(63 bpmm),相位编码 代替ANSI X3.72-1981

This American National Standard is intended to provide a format and recording standard for a 0.250-inch (6.30-mm) -wide, 4-track magnetic tape in a cartridge to be used for information interchange between information processing systems, communication systems and associated equipment utilizing the American National Standard Code for Information Interchange, ANSI X3.4-1977 (ASCII).

Parallel Recorded Magnetic Tape Cartridge for Information Interchange, 4 Track, 0.250 Inch (6.30 mm), 1600 bpi (63 bpmm), Phase Encoded Replaces ANSI X3.72-1981

ANSI/INCITS 89-1981 未记录的单片双密度盒式磁盘(正面装盘,2200pi、200 tpi)的物理和磁性通用要求 代替X3.89-1981(代替了:ANSI X3.89, ANSI X3.89)

Specifies the general, physical, and magnetic requirements for interchangeability of the single-disk cartridge (front loading) as required to achieve unrecorded cartridge interchange between disk storages and associated information processing systems.

Unrecorded Single-Disk, Double-Density Cartridge (Front Loading, 2200 bpi, 200 tpi), General, Physical, and Magnetic Requirements Replaces X3.89-1981 [Replaced: ANSI X3.89, ANSI X3.89]

BS 5769-1:1979

Three systems of arrangement of magnetically recorded separators and labels. Support for the simplest 'basic' system is necessary to ensure interchangeability of data.

ISO 4057:1979 信息处理 数据交换用6.30mm(0.25 in)宽盒式磁带,63 bpmm(160 bpi)调相制

Information processing — Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase-encoded

ISO 4341:1978 信息处理 信息交换用盒式及卡式磁带标号和文卷结构

Includes file structures for data interchange on magnetic tape cassettes. Specifies three systems: 1) basic system; 2) compact system; 3) extended system. Not limited to 3.81 mm magnetic tape cassettes but is also applicable to higher capacity cassettes or cartridges. References: ISO 646; 1001; 3275; 3407.

Information processing; Magnetic tape cassette and cartridge labelling and file structure for information interchange

NAVY MIL-STD-1697-1978 一个半英寸盒式录像带播放格式磁带

This standard provides one-half inch broadcast standard video tape specification for use on new and existing Navy American Forces Radio and Television affiliated ships and shore based American Forces Television stations.

TAPE, ONE-HALF INCH VIDEO CASSETTE BROADCAST FORMAT

ANSI/ISO 4341:1978 信息处理.INCITS采纳的用于信息交换的磁带盒,磁带盒标签和文档结构

Specifies file structures for data interchange on magnetic tape cassettes. To provide for the range of sophistication in equipment and applications, the basic, compact, and extended systems are specified. This standard is not limited to the 3, 81 mm magnetic tape cassette described in ISO 3407 but could also be applied to higher capacity cassettes or cartridges.

Information Processing - Magnetic Tape Cassette and Cartridge Labeling and File Structure for Information Interchange Adopted by INCITS

ANSI/INCITS/ISO 4341:1978 信息交换用盒式及卡式磁带标号和文卷结构

Specifies file structures for data interchange on magnetic tape cassettes. To provide for the range of sophistication in equipment and applications, the basic, compact, and extended systems are specified. This standard is not limited to the 3, 81 mm magnetic tape cassette described in ISO 3407 but could also be applied to higher capacity cassettes or cartridges.

Magnetic Tape Cassette and Cartridge Labeling and File Structure for Information Interchange

ANSI/INCITS 58-1977 未记录的11-磁盘组.一般,物理,以及磁性要求 代替X3.58-1977[被代替:ANSI X3.58,ANSI X3.58]

Specifies the general, physical and magnetic requirements for the physical interchange of magnetic eleven-disk packs for use in electronic data processing systems.

Unrecorded Eleven-Disk Pack - General, Physical, and Magnetic Requirements Replaces X3.58-1977 [Replaced: ANSI X3.58, ANSI X3.58]