35.220.30 光学存储设备 标准查询与下载



共找到 520 条与 光学存储设备 相关的标准,共 35

ISO/IEC 17346:2005 defines the characteristics of 90 mm Optical Disk Cartridges (ODC) with a capacity of 1,3 GB per cartridge. It specifies only Type R/W for 2 048-byte sectors of such cartridges. Type R/W provides for data to be written, read and erased many times over the entire recording surface of the disk using the thermo-magnetic and magneto-optical effects. It is also referred to as "fully rewritable". ISO/IEC 17346:2004 provides for 2 048-byte sectors only. All sectors on a disk are of the same size.

Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 1,3 Gbytes per cartridge

ICS
35.220.30
CCS
L64
发布
2010
实施

ISO/IEC 23912:2005 specifies the mechanical, physical and optical characteristics of an 80 mm and a 120 mm DVD Recordable disk to enable the interchange of such disks. It specifies the quality of the pre-recorded, unrecorded and the recorded signals, the format of the data, the format of the information zone, the format of the unrecorded zone, and the recording method, thereby allowing for information interchange by means of such disks. This disk is identified as a DVD Recordable (DVD-R) disk.

Information technology - 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD Recordable Disk (DVD-R)

ICS
35.220.30
CCS
L64
发布
2010
实施

Information technology - 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD re-recordable disk for dual layer (DVD-RW for DL)

ICS
35.220.30
CCS
L64
发布
2009-11
实施

Data interchange on Recordable 120 mm optical data disc (CD-R)

ICS
35.220.30
CCS
L64
发布
2009-10-20
实施

Data interchange on Rewritable 120 mm optical data disc (CD-RW)

ICS
35.220.30
CCS
L64
发布
2009-10-20
实施

Volume and file structure of DVD-RW Disk

ICS
35.220.30
CCS
L64
发布
2009-10-20
实施

Volume and file structure of DVD-RAM Disk

ICS
35.220.30
CCS
L64
发布
2009-10-20
实施

Volume and file structure of DVD-R Disk

ICS
35.220.30
CCS
L64
发布
2009-10-20
实施

Information technology — 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL)

ICS
35.220.30
CCS
发布
2009-06-12
实施

Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW DL format - Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4X)

ICS
35.220.30
CCS
L64
发布
2009-06
实施

Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X)

ICS
35.220.30
CCS
L64
发布
2009-06
实施

Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW HS format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed 8X)

ICS
35.220.30
CCS
L64
发布
2009-06
实施

Information technology - Data interchange on 120 mm and 80 mm optical disk using +R format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16X)

ICS
35.220.30
CCS
L64
发布
2009-06
实施

Information technology -- Data interchange on 120 mm and 80 mm optical disk using +R format -- Capacity: 4.7 and 1.46 Gbytes per side (Recording speed up to 16X)

ICS
35.220.30
CCS
L64
发布
2009-04-20
实施

Information technology -- Data interchange on 120 mm and 80 mm optical disk using +RW format -- Capacity: 4.7 Gbytes and 1.46 Gbytes per side (Recording speed up to 4X)

ICS
35.220.30
CCS
L64
发布
2009-04-20
实施

Information technology -- 80 mm (1.46 Gbytes per side) and 120 mm (4.70 Gbytes per side) DVD Recordable Disk (DVD-R)

ICS
35.220.30
CCS
L64
发布
2009-04-20
实施

This International Standard specifies the mechanical, physical and optical characteristics of an 80 mm and a 120 mm DVD Re-recordable disk to enable the interchange of such disks. It specifies the quality of the prerecorded, unrecorded and the recorded signals, the format of the data, the format of the information zone, the format of the unrecorded zone, and the recording method, thereby allowing for information interchange by means of such disks. This disk is identified as a DVD Re-recordable (DVD-RW) disk. This International Standard specifies ? 80 mm and 120 mm nominal diameter disks that may be either single or double sided, ? the conditions for conformance, ? the environments in which the disk is to be operated and stored, ? the mechanical and physical characteristics of the disk, so as to provide mechanical interchange between data processing systems, ? the format of the pre-recorded information on an unrecorded disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used, ? the format of the data and the recorded information on the disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used, ? the characteristics of the signals from pre-recorded and unrecorded areas on the disk, enabling data processing systems to read the pre-recorded information and to write to the disks, ? the characteristics of the signals recorded on the disk, enabling data processing systems to read the data from the disk. This International Standard provides for interchange of disks between disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information technology – 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD re-recordable disk (DVD-RW

ICS
35.220.30
CCS
发布
2009-02-11
实施

This International Standard specifies the characteristics of a case for use with 120 mm DVD-RAM disks as specified in ISO/IEC 16824. This International Standard specifies three related, but different implementations of such cases, viz. Type 1 Provides a case for a one-sided (Type 1S) or a two-sided (Type 2S) DVD-RAM disk such that the disk can not be removed from the case. This case is reversible. Type 2 Provides a case for a one-sided DVD-RAM disk (Type 1S) such that the disk may be removed from the case. This case is not reversible. Type 3 Provides a case into which a one-sided DVD-RAM disk (Type 1S) may be inserted, then used as a cartridge. This case is not reversible.

Information technology – Case for 120 mm DVD-RAM disks

ICS
35.220.30
CCS
发布
2009-02-11
实施

identified as DVD Rewritable Disk (DVD-RAM), to enable interchange of such disks. It specifies the quality of the recorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. The data can be written, read and overwritten many times using the phase change method. Two Types are specified that differ only by their diameter of 120 mm and 80 mm, and the resulting difference of capacity. This International Standard specifies ? two related but different Types of this disk (see clause 7), ? the conditions for conformance, ? the environments in which the disk is to be tested, operated and stored, ? the mechanical, physical and dimensional characteristics of the disk, so as to provide mechanical interchange between data processing systems, ? the format of the information on the disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method, ? the characteristics of the signals recorded on the disk, thus enabling data processing systems to read the data from the disk.

Information technology - 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD rewritable disk (DVD-RAM)

ICS
35.220.30
CCS
发布
2009-02-11
实施

This International Standard specifies the characteristics of a case for use with the 120 mm and 80 mm DVDRAM disks specified in International Standard ISO/IEC 17592. The present International Standard specifies nine related , but different implementations of this case, viz.

Information technology – Cases for 120 mm and 80 mm DVD-RAM disks

ICS
35.220.30
CCS
发布
2009-02-11
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号