35.220.30 光学存储设备 标准查询与下载

ISO/IEC 25435:2006 在60mm只读盒式光盘上进行的数据交换.容量:1,8千兆字节(UMDTM)

This International Standard specifies the mechanical, physical and optical characteristics of a 60 mm, readonly ODC having a maximum capacity of 1,8 Gbytes. It specifies the physical format, the quality of the recorded signals, the format of the data and its modulation method, thereby allowing for information interchange by means of such ODCs. This International Standard specifies two types of ODCs, Type A and Type B: Type A: Single layer disk with maximum recorded capacity of 0,9 G-bytes; Type B: Dual layer disk with maximum recorded capacity of 1,8 G-bytes. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specifications of the structure and labeling of the information on the interchanged ODCs. UMD™ is the trade mark of Sony Computer Entertainment Inc.

Data Interchange on 60 mm Read-Only ODC - Capacity: 1,8 Gbytes (UMDTM)

BS EN 62403:2006 CD-R/RW磁盘系统上的高密度记录格式.HD-BURN格式

This International Standard specifies the HD-BURN format applied to CD-R/RW discs. The HD-BURN system is capable of recording the information in double density compared to the conventional CD-R/RW disc. It enables the realization of products with high reliability, high speed and interchangeability, and is especially suitable for consumer applications with high cost-performance. This document describes: – the physical characteristics for the recording and playback; – the track structure of a disc; – the data structure in the track; – logical format structure.

High density recording format on CD-R/RW disc system - HD-BURN format

ISO/IEC 25434:2006 用+R DL格式在120 mm和80 mm盒式光盘上进行的数据交换.容量:每面8.55和2.66千兆字节（记录速度2,4x)

Data interchange on 120 mm and 80 mm Optical Disk using +R DL Format - Capacity: 8,55 and 2,66 Gbytes per Side (Recording speed 2,4x)

DLA SMD-5962-81015 REV C-2006 硅单片16千比特动态随机存取存储器,数字记忆微型电路

This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.

MICROCIRCUIT, MEMORY, DIGITAL, DYNAMIC 16K RANDOM ACCESS MEMORY (RAM), MONOLITHIC SILICON

JIS X 6281:2006 120mm只读数据光盘(CD-ROM)上的数据交换

この規格は，情報処理システム間の情報交換用及び情報記億用の，CD-ROMと呼ばれる120mm光ディスクの特性について規定する。

Data interchange on read-only 120 mm optical data disks (CD-ROM)

SJ/T 11321-2006 DVD/CD 只读光学头通用规范

本规范规定了DVD/CD 只读光学头的术语和定义、缩略语、一般要求、性能参数规格、测试方法、可靠性及标志、标记和包装。 本规范适用于各种DVD只读光学头、CD只读光学头。

General specification of DVD/CD read-only optical pick-up

ANSI/INCITS/ISO/IEC 17345:2006 信息技术.130mm可重写和一次写多次读的超密度光盘(UDO)盒带的数据交换.容量:每盒30G字节.第一代

ISO/IEC 17345:2006 specifies the mechanical, physical, and optical characteristics of a 130 mm optical disk cartridge (ODC) that employs thermo-optical Phase Change effects to enable data interchange between such disks.

Information technology - Data Interchange on 130 mm Rewritable and Write Once Read Many Ultra Density Optical (UDO) Disk Cartridges - Capacity: 30 Gbytes per Cartridge - First Generation

KS X ISO/IEC 22092-1:2005 信息技术－130mm磁光盘盒上的数据交换－容量:每盒9.1GB

Information technology－Data interchange on 130 mmmagneto-optical disk cartridges－Capacity：9.1 Gbytes per cartridge

KS X ISO/IEC 20162-1-2005 信息技术WORM型（一次写入多次读取）不可逆效应300mm盒式光盘的数据交换容量:30GB/盒

Information technology－Data interchange on 300 mm optical disk cartridges of Type WORM(Write Once Read Many) using irreversible effects－Capacity：30 Gbyte per cartridge

KS X ISO/IEC 20563-1-2005 信息技术－80毫米（每面1.23 GB）和120毫米（每面3.95 GB）DVD可录光盘（DVD－R）

Information technology－80 mm(1.23 Gbytes per side) and 120 mm (3.95 Gbytes per side) DVD-recordable disk(DVD－R)

KS X ISO/IEC 22092-1-2005 信息技术－130mm磁光盘盒上的数据交换－容量:每盒9.1GB

Information technology－Data interchange on 130 mmmagneto-optical disk cartridges－Capacity：9.1 Gbytes per cartridge

KS X ISO/IEC 20162-1:2005 信息技术WORM型（一次写入多次读取）不可逆效应300mm盒式光盘的数据交换容量:30GB/盒

Information technology－Data interchange on 300 mm optical disk cartridges of Type WORM(Write Once Read Many) using irreversible effects－Capacity：30 Gbyte per cartridge

KS X ISO/IEC 20563-1:2005 信息技术－80毫米（每面1.23 GB）和120毫米（每面3.95 GB）DVD可录光盘（DVD－R）

Information technology－80 mm(1.23 Gbytes per side) and 120 mm (3.95 Gbytes per side) DVD-recordable disk(DVD－R)

ISO/IEC 23912:2005 信息技术.80mm(每面1.46Gbytes)和120mm(每面4.70Gbytes)DVD可刻录光盘(DVD-R)

This International Standard specifies the mechanical, physical and optical characteristics of an 80 mm and a 120 mm DVD Recordable disk to enable the interchange of such disks. It specifies the quality of the prerecorded, unrecorded and the recorded signals, the format of the data, the format of the information zone, the format of the unrecorded zone, and the recording method, thereby allowing for information interchange by means of such disks. This disk is identified as a DVD Recordable (DVD-R) disk. This International Standard specifies − 80 mm and 120 mm nominal diameter disks that may be either single or double sided, − the conditions for conformance, − the environments in which the disk is to be operated and stored, − the mechanical and physical characteristics of the disk, so as to provide mechanical interchange between data processing systems, − the format of the pre-recorded information on an unrecorded disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used, − the format of the data and the recorded information on the disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used, − the characteristics of the signals from pre-recorded and unrecorded areas on the disk, enabling data processing systems to read the pre-recorded information and to write to the disks, − the characteristics of the signals recorded on the disk, enabling data processing systems to read the data from the disk. This International Standard provides for interchange of disks between disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information technology - 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD Recordable Disk (DVD-R)

CAN/CSA-ISO/IEC 17592:2005(R2010) 信息技术 120 毫米（每面 4.7 GB）和 80 毫米（每面 1.46 GB）DVD 可重写磁盘 (DVD RAM)

This International Standard specifies the mechanical, physical and optical characteristics of an optical disk, identified as DVD Rewritable Disk (DVD-RAM), to enable interchange of such disks. It specifies the quality of the recorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. The data can be written, read and overwritten many times using the phase change method. Two Types are specified that differ only by their diameter of 120 mm and 80 mm, and the resulting difference of capacity. This International Standard specifies - two related but different Types of this disk (see clause 7), - the conditions for conformance, - the environments in which the disk is to be tested, operated and stored, - the mechanical, physical and dimensional characteristics of the disk, so as to provide mechanical interchange between data processing systems, - the format of the information on the disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method, - the characteristics of the signals recorded on the disk, thus enabling data processing systems to read the data from the disk. This International Standard provides for the interchange of disks between optical disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems. The optical disks specified by this International Standard may be enclosed in cases according to ISO/IEC 17594 as specified therein.

Information Technology - 120 mm (4,7 Gbytes per Side) and 80 mm (1,46 Gbytes per Side) DVD Rewritable Disk (DVD RAM)

CAN/CSA-ISO/IEC 17342:2005(R2010) 信息技术 80 毫米（每面 1.46 GB）和 120 毫米（每面 4.70 GB）DVD 可重新刻录光盘 (DVD-RW)

This National Standard of Canada is equivalent to International Standard ISO/IEC 17342:2004. 1 Scope This International Standard specifies the mechanical, physical and optical characteristics of an 80 mm and a 120 mm DVD Re-recordable disk to enable the interchange of such disks. It specifies the quality of the prerecorded, unrecorded and the recorded signals, the format of the data, the format of the information zone, the format of the unrecorded zone, and the recording method, thereby allowing for information interchange by means of such disks. This disk is identified as a DVD Re-recordable (DVD-RW) disk. This International Standard specifies - 80 mm and 120 mm nominal diameter disks that may be either single or double sided, - the conditions for conformance, - the environments in which the disk is to be operated and stored, - the mechanical and physical characteristics of the disk, so as to provide mechanical interchange between data processing systems, - the format of the pre-recorded information on an unrecorded disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used, - the format of the data and the recorded information on the disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used, - the characteristics of the signals from pre-recorded and unrecorded areas on the disk, enabling data processing systems to read the pre-recorded information and to write to the disks, - the characteristics of the signals recorded on the disk, enabling data processing systems to read the data from the disk. This International Standard provides for interchange of disks between disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information Technology - 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD Re-Recordable Disk (DVD-RW)

CAN/CSA-ISO/IEC 17594:2005(R2010) 信息技术 120 毫米和 80 毫米 DVD-RAM 磁盘盒

This National Standard of Canada is equivalent to International Standard ISO/IEC 17594:2004. 1 Scope This International Standard specifies the characteristics of a case for use with the 120 mm and 80 mm DVDRAM disks specified in International Standard ISO/IEC 17592. The present International Standard specifies nine related , but different implementations of this case, viz. Type 1 A case for a one-sided (Type 1S) or a two-sided (Type 2S) 120 mm DVD-RAM disk such that the disk cannot be removed from the case. This case is reversible. Type 2 A case for a one-sided (Type 1S) 120 mm DVD-RAM disk such that the disk may be removed from the case. This case is not reversible. Type 3 A case into which a one-sided (Type 1S) or a two-sided (Type 2S) 120 mm DVD-RAM disk may be inserted, then used as a cartridge. This case is not reversible. Type 4 A case for a two-sided (Type 2S) 120 mm DVD-RAM disk such that the disk may be removed from the case. This case is reversible. Type 5 A case into which a one-sided (Type 1S) or a two-sided (Type 2S) 120 mm DVD-RAM disk may be inserted, then used as a cartridge. This case is reversible. Type 6 A case for a two-sided (Type 2S) 80 mm DVD-RAM disk such that the disk may be removed from the case. This case is reversible. Type 7 A case for a one-sided (Type 1S) 80 mm DVD-RAM disk such that the disk may be removed from the case. This case is not reversible. Type 8 A case into which a two-sided (Type 2S) 80 mm DVD-RAM disk may be inserted, then used as a cartridge. This case is reversible. Type 9 A case into which a one-sided (Type 1S) 80 mm DVD-RAM disk may be inserted, then used as a cartridge. This case is not reversible. This International Standard specifies - the environments in which the cases are to be operated and stored; - the dimensional and mechanical characteristics of the case, so as to provide mechanical interchangeability between data processing systems; This International Standard provides for mechanical interchange between optical disk drives. Together with International Standard ISO/IEC 17592 for 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD-RAM disks and a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information Technology - Cases for 120 mm and 80 mm DVD-RAM Disks

DLA SMD-5962-86020 REV C-2005 肖脱基双极随机存取存储器256X1比特低功率主储存器微型处理器

This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.

MICROCIRCUIT, MEMORY, 256 X 1-BIT LOW POWER, SCHOTTKY BIPOLAR RAM MONOLITHIC SILICON

DIN EN 62345:2005 50mm磁-光盘系统用ID格式

ID format for 50 mm magneto-optical disc system (IEC 62345:2005); German version EN 62345:2005, text in English

JIS X 6247:2005 120 mm 和 80 mm DVD-RAM盘用外壳

この規格は，JAS X 6246に規定する120mm DVD-RAMディスク及び80 mm DVD-RAMディスク(以下，ディスクという。)に用いろケース(以下，ケースという。)の特性について規定する。この規格は，関連する仕様の異なる次の九つのタイプについて規定する。これらのケースには，裏返して使用できるタイプと使用できないタイプとがある。

Cases for 120 mm and 80 mm DVD-RAM disks