35.220.30 光学存储设备 标准查询与下载
共找到 520 条与 光学存储设备 相关的标准，共 35 页
この規格は，120mm[4.7ギガバイト(以下，GBという。)/面]及び80 mm(1.46GB/面)DVD-書換形ディスク(以下，ディスクという。)の互換性を可能にする機械的特性，物理的特性及び光学的特性を規定するとともに，情報交換を可能にする記録した信号の品質，データのフオーマット及び記録方法について規定する。データは，相変化方式を用いて，多数回の書込み，読取り及びオーバライトが可能である。直径によって120mm及び80mmの2種類の容量を規定する。
120 mm (4.7 Gbyte per side) and 80 mm (1.46 Gbyte per side) DVD rewritable disk (DVD-RAM)
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2005-08-20
- 实施
This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.
MICROCIRCUIT, MEMORY, DIGITAL, CMOS 16K STATIC RAM, MONOLITHIC SILICON
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2005-08-03
- 实施
This International Standard defines the characteristics of 90 mm Optical Disk Cartridges (ODC) with a capacity of 2,3 GB per Cartridge. The Standard specifies only Type R/W for 2 048–byte sectors of such cartridge. Type R/W provides for data to be written, read and erased many times over the entire recording surface of the disk using the thermo-magnetic and magneto-optical effects. It is also referred to as "fully rewritable". This International Standard provides for 2 048-byte sectors only. All sectors on a disk are of the same size. This International Standard specifies the conditions for conformance testing and the Reference Drive; the environments in which the cartridges are to be operated and stored; the mechanical and physical characteristics of the cartridge, so as to provide mechanical interchange ability between data processing systems; the format of the information on the disk, both embossed and user-written; including the physical disposition of the tracks and sectors, the error correction codes, and the modulation method used; the characteristics of the embossed information on the disk; the magneto-optical characteristics of the disk, enabling processing systems to write data onto the disk; the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk. This International Standard provides for interchange between optical disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.
Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 2,3 Gbytes per cartridge
- ICS
- 35.220.30
- CCS
- L70
- 发布
- 2005-07
- 实施
This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.
MICROCIRCUIT, MEMORY, DIGITAL, SCHOTTKY BIPOLAR 32K PROGRAMMABLE READ ONLY MEMORY (PROM), MONOLITHIC SILICON
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2005-06-30
- 实施
Deleted reference to checkerboard pattern in 3.2.2.1. Deleted footnote reference to how subgroups 7 and 8 are verified in table II. Added footnote 2 to device types 11RX, 12RX, 13RX, and 14RX. Removed reference to case outline Y in 6.6, previously replaced with case outline S. Editorial changes throughout.
MICROCIRCUIT, MEMORY, DIGITAL, BIPOLAR, PROGRAMMABLE LOGIC, MONOLITHIC SILICON
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2005-06-14
- 实施
Information technology - Data interchange on 120 mm and 80 mm optical disk using +R format - Capacity: 4,7 and 1,46 Gbytes per side (recording speed up to 8X)
- ICS
- 35.220.30
- CCS
- L72
- 发布
- 2005-06-01
- 实施
This International Standard specifies the HD-BURN format applied to CD-R/RW discs. The HD-BURN system is capable of recording the information in double density compared to the conventional CD-R/RW disc. It enables the realization of products with high reliability, high speed and interchangeability, and is especially suitable for consumer applications with high cost-performance. This document describes: - the physical characteristics for the recording and playback; - the track structure of a disc; - the data structure in the track; - logical format structure.
High density recording format on CD-R/RW disc system - HD-BURN format
- ICS
- 35.220.30
- CCS
- L70;L64
- 发布
- 2005-06
- 实施
- 2005-06-27
This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.
MICROCIRCUIT, LINEAR, FAST SAMPLE AND HOLD, GATED OPERATIONAL AMPLIFIER, MONOLITHIC SILICON
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2005-03-22
- 实施
This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.
MICROCIRCUIT, MEMORY, DIGITAL, 16K X 8 UV ERASEABLE PROGRAMMABLE READ ONLY MEMORY (EPROM), MONOLITHIC SILICON
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2005-03-09
- 实施
This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.
MICROCIRCUITS, MEMORY, DIGITAL, 8192 BIT, SWITCHABLE, SCHOTTKY, BIPOLAR PROM WITH TRI-STATE OUTPUT, MONOLITHIC SILICON
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2005-03-02
- 实施
Specifies the characteristics of 50 mm Optical Disc Cartridges (ODC) with a capacity of 730 Mbytes per Cartridge. This regulation covers the logical format of removable 50 mm magneto-optical discs used on digital still cameras, digital movie cameras, ele
ID format for 50 mm magneto-optical disc system
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2005-03
- 实施
- 2005-03-09
This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.
MICROCIRCUITS, MEMORY, DIGITAL, NMOS 4K X 8 UV ERASABLE PROM, MONOLITHIC SILICON
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2005-02-10
- 实施
This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.
MICROCIRCUITS, MEMORY, DIGITAL, 65,536 (8KX8), UV ERASABLE PROM, MONOLITHIC SILICON
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2005-02-10
- 实施
This International Standard defines the characteristics of 90 mm Optical Disk Cartridges (ODC) with a capacity of 1,3 GB per cartridge. It specifies only Type R/W for 2 048–byte sectors of such cartridges. Type R/W provides for data to be written, read and erased many times over the entire recording surface of the disk using the thermo-magnetic and magneto-optical effects. It is also referred to as "fully rewritable". This International Standard provides for 2 048-byte sectors only. All sectors on a disk are of the same size. This International Standard specifies: − the conditions for conformance testing and the Reference Drive; − the environments in which the cartridges are to be operated and stored; − the mechanical and physical characteristics of the cartridge, so as to provide mechanical interchange ability between data processing systems; − the format of the information on the disk, both embossed and user-written; including the physical disposition of the tracks and sectors, the error correction codes, and the modulation method used; − the characteristics of the embossed information on the disk; − the magneto-optical characteristics of the disk, enabling processing systems to write data onto the disk; − the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk. This International Standard provides for interchange between optical disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.
Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 1,3 Gbytes per cartridge
- ICS
- 35.220.30
- CCS
- L72
- 发布
- 2005-02
- 实施
Information technology - Data interchange on 130 mm rewritable and write once read many ultra density optical (UDO) disk cartridges - Capacity: 30 Gbytes per cartridge (first generation)
- ICS
- 35.220.30
- CCS
- L72
- 发布
- 2005-02
- 实施
Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (Recording speed up to 4x)
- ICS
- 35.220.30
- CCS
- L64;L72
- 发布
- 2005-02
- 实施
この規格は，80mmDVD一再生専用ディスク(以下，ディスクという。)の互換を可能にする機械的特性，物理的特性及び光学的特性を規定するとともに，情報交換を可能にする記録した信号の品質，データのフオーマット及び記録方法について規定する。
80 mm DVD -- Read-only disk
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2004-12-20
- 实施
この規格は，120mm DVD—再生専用ディスク(以下，ディスクという。)の互換を可能にする機械的特性，物理的特性及び光学的特性を規定するとともに，情報交換を可能にする記録した信号の品質，データのフォーマット及び記録方法について規定する。
120 mm DVD -- Read-only disk
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2004-12-20
- 实施
Information technology－80 mm(1.23 Gbytes per side) and120 mm(3,95 Gbytes per side) DVD-recordable disk(DVD－R)
- ICS
- 35.220.30
- CCS
- 发布
- 2004-08-30
- 实施
Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side
- ICS
- 35.220.30
- CCS
- L64
- 发布
- 2004-07
- 实施
