35.220.30 光学存储设备 标准查询与下载

ISO/IEC 17592:2004 信息技术.120mm(每面4.7G字节)和80mm(每面1.46G字节)DVD可再写盘

This International Standard specifies the mechanical, physical and optical characteristics of an optical disk, identified as DVD Rewritable Disk (DVD-RAM), to enable interchange of such disks. It specifies the quality of the recorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. The data can be written, read and overwritten many times using the phase change method. Two Types are specified that differ only by their diameter of 120 mm and 80 mm, and the resulting difference of capacity. This International Standard specifies − two related but different Types of this disk (see clause 7), − the conditions for conformance, − the environments in which the disk is to be tested, operated and stored, − the mechanical, physical and dimensional characteristics of the disk, so as to provide mechanical interchange between data processing systems, − the format of the information on the disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method, − the characteristics of the signals recorded on the disk, thus enabling data processing systems to read the data from the disk. This International Standard provides for the interchange of disks between optical disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems. The optical disks specified by this International Standard may be enclosed in cases according to ISO/IEC 17594 as specified therein.

Information technology - 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD rewritable disk (DVD-RAM)

ISO/IEC 17342:2004 信息技术.80mm(每面1.46 Gbytes)和120mm(每面4.7 Gbytes)DVD可再记录盘(DVD-RW)

This International Standard specifies the mechanical, physical and optical characteristics of an 80 mm and a 120 mm DVD Re-recordable disk to enable the interchange of such disks. It specifies the quality of the prerecorded, unrecorded and the recorded signals, the format of the data, the format of the information zone, the format of the unrecorded zone, and the recording method, thereby allowing for information interchange by means of such disks. This disk is identified as a DVD Re-recordable (DVD-RW) disk. This International Standard specifies − 80 mm and 120 mm nominal diameter disks that may be either single or double sided, − the conditions for conformance, − the environments in which the disk is to be operated and stored, − the mechanical and physical characteristics of the disk, so as to provide mechanical interchange between data processing systems, − the format of the pre-recorded information on an unrecorded disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used, − the format of the data and the recorded information on the disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used, − the characteristics of the signals from pre-recorded and unrecorded areas on the disk, enabling data processing systems to read the pre-recorded information and to write to the disks, − the characteristics of the signals recorded on the disk, enabling data processing systems to read the data from the disk. This International Standard provides for interchange of disks between disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information technology - 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD re-recordable disk (DVD-RW)

ISO/IEC 17594:2004 信息技术.120 mm 和 80 mm DVD-RAM盘用外壳

This International Standard specifies the characteristics of a case for use with the 120 mm and 80 mm DVDRAM disks specified in International Standard ISO/IEC 17592. The present International Standard specifies nine related , but different implementations of this case, viz. Type 1 A case for a one-sided (Type 1S) or a two-sided (Type 2S) 120 mm DVD-RAM disk such that the disk cannot be removed from the case. This case is reversible. Type 2 A case for a one-sided (Type 1S) 120 mm DVD-RAM disk such that the disk may be removed from the case. This case is not reversible. Type 3 A case into which a one-sided (Type 1S) or a two-sided (Type 2S) 120 mm DVD-RAM disk may be inserted, then used as a cartridge. This case is not reversible. Type 4 A case for a two-sided (Type 2S) 120 mm DVD-RAM disk such that the disk may be removed from the case. This case is reversible. Type 5 A case into which a one-sided (Type 1S) or a two-sided (Type 2S) 120 mm DVD-RAM disk may be inserted, then used as a cartridge. This case is reversible. Type 6 A case for a two-sided (Type 2S) 80 mm DVD-RAM disk such that the disk may be removed from the case. This case is reversible. Type 7 A case for a one-sided (Type 1S) 80 mm DVD-RAM disk such that the disk may be removed from the case. This case is not reversible. Type 8 A case into which a two-sided (Type 2S) 80 mm DVD-RAM disk may be inserted, then used as a cartridge. This case is reversible. Type 9 A case into which a one-sided (Type 1S) 80 mm DVD-RAM disk may be inserted, then used as a cartridge. This case is not reversible. This International Standard specifies − the environments in which the cases are to be operated and stored; − the dimensional and mechanical characteristics of the case, so as to provide mechanical interchangeability between data processing systems; This International Standard provides for mechanical interchange between optical disk drives. Together with International Standard ISO/IEC 17592 for 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD-RAM disks and a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information technology - Cases for 120 mm and 80 mm DVD-RAM disks

CAN/CSA-ISO/IEC 16449:2004(R2012) 信息技术 80 毫米 DVD 只读磁盘

This National Standard of Canada is equivalent to International Standard ISO/IEC 16449:2002 (second edition, 2002-04-15). 1 Scope This International Standard specifies the mechanical, physical and optical characteristics of a 80 mm, read-only optical disk to enable the interchange of such disks. It specifies the quality of the recorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. This disk is identified as DVD - Read-Only Disk. This International Standard specifies - four related but different Types of this disk (see clause 7), - the conditions for conformance, - the environments in which the disk is to be operated and stored, - the mechanical and physical characteristics of the disk, so as to provide mechanical interchange between data processing systems, - the format of the information on the disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used, - the characteristics of the signals recorded on the disk, enabling data processing systems to read the data from the disk. This International Standard provides for interchange of disks between disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information Technology - 80 mm DVD - Read-Only Disk

CAN/CSA-ISO/IEC 20563:2004(R2012) 信息技术 80 毫米（每面 1.23 GB）和 120 毫米（每面 3.95 GB）DVD 可刻录光盘 (DVD-R)

This National Standard of Canada is equivalent to International Standard ISO/IEC 20563:2001 (first edition, 2001-06-01). 1 Scope This International Standard specifies the mechanical, physical and optical characteristics of an 80 mm and a 120 mm DVD - Recordable disk to enable the interchange of such disks. It specifies the quality of the pre-recorded, unrecorded and the recorded signals, the format of the data, the format of the information zone, the format of the unrecorded zone, and the recording method, thereby allowing for information interchange by means of such disks. This disk is identified as a DVD - Recordable (DVD-R) disk. Once data has been recorded on a DVD-R disk it cannot be modified. It can be read many times. Further data may be appended. This International Standard specifies - 80 mm and 120 mm nominal diameter disks that may be either single or double sided, - the conditions for conformance, - the environments in which the disk is to be operated and stored, - the mechanical and physical characteristics of the disk, so as to provide mechanical interchange between data processing systems, - the format of the pre-recorded information on an unrecorded disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used, - the format of the data and the recorded information on the disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used, - the characteristics of the signals from pre-recorded and unrecorded areas on the disk, enabling data processing systems to read the pre-recorded information and to write to the disks, - the characteristics of the signals recorded on the disk, enabling data processing systems to read the data from the disk. This International Standard provides for interchange of disks between disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information Technology - 80 mm (1,23 Gbytes per Side) and 120 mm (3,95 Gbytes per Side) DVD-Recordable Disk (DVD-R)

DLA SMD-5962-84111 REV E-2004 硅单片262,144比特(32K X 8) 微伏可擦可编程序只读存储器,数字记忆微型电路

This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A.

MICROCIRCUIT, MEMORY DIGITAL, 262, 144-BIT (32K X 8) UV ERASABLE PROM, MONOLITHIC SILICON

KS X ISO/IEC 13490-1-2003(2018) 信息技术 - 卷和文件结构仅读取和写入一次信息交换光盘介质 - 第1部分:总则

Information technology - Volume and file structures on read-only, write-once compact disk media for information exchange - Part 1: Overview

KS X ISO/IEC 13490-1-2003(2023) 信息技术-用于信息交换的只读、一次性写入的紧凑磁盘介质的卷和文件结构-第1部分:概述

Information technology - Volume and file structures of read-only, write-once compact disk media for information exchange - Part 1: Overview

DS/ISO/IEC 16449:2003 信息技术 80 毫米 DVD 只读盘

This International Standard specifies the mechanical, physical and optical characteristics of a 80 mm, read-only optical disk to enable the interchange of such disks. It specifies the quality of the recorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. This disk is identified as DVD - Read-Only Disk.

Information technology - 80 mm DVD - Read-only disk

DS/ISO/IEC 16448:2003 信息技术 120 毫米 DVD 只读盘

This International Standard specifies the mechanical, physical and optical characteristics of a 120 mm, read-only optical disk to enable the interchange of such disks. It specifies the quality of the recorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. This disk is identified as DVD - Read-Only Disk.

Information technology - 120 mm DVD - Read-only disk

ISO 18927:2002 成像材料.可记录光盘系统.在温度和湿度影响的基础上评价预期使用期限的方法

This International Standard specifies a test method for estimating the life expectancy of information stored on recordable compact disc systems. Only the effects of temperature and relative humidity on the media are considered. This International Standard does not cover the effects of light, air pollution, or time-dependent flow phenomena.

Imaging materials - Recordable compact disc systems - Method for estimating the life expectancy based of the effects of temperature and relative humidity

ANSI/ISO/IEC 22092:2002 信息技术.130mm盒式磁光盘的数据交换.INCITS采用每盒容量:9,1Gbytes

Specifies the mechanical, physical, and optical characteristics of a 130 mm optical disk cartridge (ODC) that employs thermo-magnetic and magneto-optical effects to enable data interchange between such disks. This International Standard specifies two Types, viz. Type R/W provides for data to be written, read and erased many time over the recording surface(s) of the disk.

Information technology Data interchange on 130 mm magneto-optical disk cartridges Capacity: 9,1 Gbytes per cartridge Adopted by INCITS

ISO/IEC 22092:2002 信息技术.在130mm盒式磁光盘的数据交换.容量.9,1千兆字节

This International Standard specifies the mechanical, physical, and optical characteristics of a 130 mm optical disk cartridge (ODC) that employs thermo-magnetic and magneto-optical effects to enable data interchange between such disks. This International Standard specifies two Types, viz. Type R/W provides for data to be written, read and erased many time over the recording surface(s) of the disk. Type WO provides for data once written to be read a multiplicity of times. Data shall not be erased nor amended. Multisession (incremental write operations) recording may be performed on type WO disks. The disk shall be of the same Type if recorded on both sides, A and B. Each side shall have a nominal capacity of 4,58 Gbytes, irrespective of the Type. The format specifies two sector sizes and allows for emulation of two further sizes. This International Standard specifies - the conditions for conformance testing and the Reference Drive; - the environments in which the cartridges are to be operated and stored; - the mechanical, physical and dimensional characteristics of the cartridge so as to provide mechanical interchangeability between data processing systems; - the format of the information on the disk, both embossed and user-written, including the physical disposition of the tracks and sectors, the error correction codes, the modulation methods used; - the characteristics of the embossed information on the disk; - the thermo-magnetic and magneto-optical characteristics of the disk, enabling processing systems to write data onto the disk; - the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk. This International Standard provides for interchange between optical disk drives. Together with a standard for volume and file structure it provides for full data interchange between data processing systems.

Information technology - Data interchange on 130 mm magneto-optical disk cartridges - Capacity: 9,1 Gbytes per cartridge

IEC TR 62291:2002 多媒体数据存储.UDF基文件体系的应用程序接口

Specifies an application program interface (API) for reading and writing the files which conform to the Universal Disk Format (UDF) specification revision 2.00 developed by the Optical Storage Technology Association (OSTA) and its security extension.

Multimedia data storage - Application program interface for UDF based file systems

ANSI/ISO/IEC 16449:2002 信息技术.INCITS采用80mm DVD只读光盘

Specifies the mechanical, physical and optical characteristics of a 80 mm, read-only optical disk to enable the interchange of such disks.

Information technology 80 mm DVD Read-only disk Adopted by INCITS

ANSI/ISO/IEC 16448:2002 信息技术.INCITS采用120mm DVD只读光盘

Specifies the mechanical, physical and optical characteristics of a 120 mm, read-only optical disk to enable the interchange of such disks.

Information technology 120 mm DVD Read-only disk Adopted by INCITS

ISO/IEC 16449:2002 信息技术.80 mm DVD.只读光盘

This International Standard specifies the mechanical, physical and optical characteristics of a 80 mm, read-only optical disk to enable the interchange of such disks. It specifies the quality of the recorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. This disk is identified as DVD - Read-Only Disk. This International Standard specifies - four related but different Types of this disk (see clause 7), - the conditions for conformance, - the environments in which the disk is to be operated and stored, - the mechanical and physical characteristics of the disk, so as to provide mechanical interchange between data processing systems, - the format of the information on the disk, including the physical disposition of the tracks and sectors, the error correcting codes and the coding method used, - the characteristics of the signals recorded on the disk, enabling data processing systems to read the data from the disk. This International Standard provides for interchange of disks between disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information technology - 80 mm DVD - Read-only disk

ANSI/INCITS/ISO/IEC 16449:2002 信息技术.80mm DVD只读光盘

Specifies the mechanical, physical and optical characteristics of a 80 mm, read-only optical disk to enable the interchange of such disks.

Information Technology - 80 mm DVD - Read-only Disk

ANSI/INCITS/ISO/IEC 16448:2002 信息技术.120mm DVD只读光盘

Specifies the mechanical, physical and optical characteristics of a 120 mm, read-only optical disk to enable the interchange of such disks.

Information Technology - 120 mm DVD - Read-only Disk

ANSI/INCITS/ISO/IEC 22092:2002 信息技术.130mm磁光盒式光盘的数据交换.容量:每盒9.1G字节

Specifies the mechanical, physical, and optical characteristics of a 130 mm optical disk cartridge (ODC) that employs thermo-magnetic and magneto-optical effects to enable data interchange between such disks. This International Standard specifies two Types, viz. Type R/W provides for data to be written, read and erased many time over the recording surface(s) of the disk.

Information Technology - Data Interchange on 130 mm Magneto-Optical Disk Cartridges - Capacity: 9,1 Gbytes Per Cartridge