35.220.30 光学存储设备 标准查询与下载

JIS X 6292:1998 信息技术.使用相位改变的相位检波(PD)格式在 120 mm 盒式光盘上进行的数据交换.容量:每盒 650 兆字节

この規格は，相変化PDフオーマットの650メガバイトの記憶容量をもつ120mm光ディスクカートリッジの特性を規定する。この規格は，次の2種の光ディスクカートリッジについて規定する。

Information technology -- Data interchange on 120 mm optical disk cartridges using phase change PD format -- Capacity: 650 Mbytes per cartridge

JIS X 6277:1998 信息技术.90mm 盒式光盘上的数据交换.容量:每盒 640 兆字节

この規格は，カートリッジ当たり公称640メガバィトの容量をもっ90mm光ディスクカートリッジの特性を規定する。この規格は，次の5種の光ディスクカートリッジについて規定する。

Information technology -- Data interchange on 90 mm optical disk cartridges -- Capacity: 640 Mbytes per cartridge

JIS X 6291:1998 信息技术.使用相位改变法在 90 mm 覆盖写入和盒式光盘上进行的数据交换.容量:每盒 1.3 千兆字节

この規格は，カートリッジ当たり1.3ギガバイトの容量をもっ相変化90mm光ディスクカートリソジの特性を規定する。この規格は，次の3種の光ディスクカートリッジについて規定する。

Information technology -- Data interchange on 90 mm overwritable and read only optical disk cartridges using phase change -- Capacity: 1.3 Gbytes per cartridge

JIS X 6276:1998 信息技术.信息交换用130 mm 盒式光盘.容量:每盒 2.6 千兆字节

この規格は，幾つかのタイプ名称カ附けられた一連の130 mm光ディスクカートリッジを規定する。

Information technology -- 130 mm optical disk cartridges for information interchange -- Capacity: 2.6 Gbytes per cartridge

ANSI/ISO/IEC 15898:1998 信息技术.使用相变技术在单写多读356 mm光盘盒上数据交换.INCITS采纳的容量:每磁道14.8 Gbytes和25 Gbytes

This International Standard specifies the characteristics of 356 mm Optical Disk Cartridges (ODCs) of the type providing for information to be written once and read many times.

Information technology Data interchange on 356 mm optical disk cartridges WORM, using phase change technology Capacity: 14,8 Gbytes and 25 Gbytes per cartridge Adopted by INCITS

ISO/IEC 15898:1998 信息技术.使用相变技术的356mm WORM盒式光盘上的数据交换.容量:每盒14.8GB和25GB

This International Standard specifies the characteristics of 356 mm Optical Disk Cartridges (ODCs) of the type providing for information to be written once and read many times. This International Standard specifies: - definitions of essential concepts, - the environment in which the characteristics shall be tested, - the environments in which the cartridge shall be operated and stored, - the mechanical, physical and dimensional characteristics of the case and of the optical disk, - the optical characteristics and the recording characteristics for recording the information once and for reading it many times, so as to provide physical interchangeability between data processing systems. - the format for the physical disposition of the tracks and sectors, the error correction codes, the modulation methods used for recording and the quality of the recorded signals. Together with a standard for volume and file structure, this International Standard provides for full data interchange between data processing systems.

Information technology - Data interchange on 356 mm optical disk cartridges - WORM, using phase change technology - Capacity: 14,8 Gbytes and 25 Gbytes per cartridge

ANSI/ISO/IEC 15486:1998 信息技术.应用不可逆效应的WORM(单写多读)式130 mm光盘盒数据交换.INCITS采纳的容量:每磁道2.6 Gbytes

This International Standard specifies the characteristics of a 130 mm Optical Disk Cartridge (ODC) of the Type WORM (Write Once Read Many) with a capacity of 2, 6 Gbytes. Type WORM ODCs use writing effects that are inherently irrevers.

Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 2,6 Gbytes per cartridge Adopted by INCITS

ISO/IEC 15486:1998 信息技术.利用不可逆效果的WORM(一写多读)型130mm盒式光盘上的数据交换.容量:每盒2.6GB

This International Standard specifies the characteristics of a 130 mm optical disk cartridge (ODC) of Type WORM (Write Once Read Many) with a capacity of 2,6 Gbytes. Type WORM ODCs use writing effects that are inherently irreversible. Written marks cannot be erased and attempted modification of the written marks are detectable. This International Standard specifies - the conditions for conformance testing and the Reference Drive; - the environments in which the cartridges are to be operated and stored; - the mechanical, physical and dimensional characteristics of the cartridge, so as to provide mechanical interchange ability between data processing systems; - the format of the information on the disk, both embossed and user-written, including the physical disposition of the tracks and sectors, the error correction codes, the modulation methods used; - the characteristics of the embossed information on the disk; - the recording characteristics of the disk, enabling processing systems to write data onto the disk; - the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk. This International Standard provides for interchange between optical disk drives. Together with a standard for volume and file structure it provides for full data interchange between data processing systems.

Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 2,6 Gbytes per cartridge

JIS X 0609:1998 使用信息交换的非顺序记录的高密光盘容量和文档结构

この規格は，DVDなどの高密度光ディスクを用いての情報処理システム利用者間で情報交換を行うためのボリューム認識，起動プロック認識，ボリューム構造及びファイル構造に関するファイルシステム及びその実装を規定する。

Volume and file structure of high-density optical disks using non-sequential recording for information interchange

DS/ISO/IEC 15041:1998 信息技术 90 毫米光盘盒上的数据交换 容量：每盒 640 兆字节

This Standard defines the characteristics of 90 mm Optical Disk Cartridges (ODC) with a capacity of 640 Mbytes per Cartridge. The Standard specifies five related, but different implementations of such cartridges, viz. Type R/W, Type DOW, Type P-ROM, Type P-DOW and Type O-ROM.

Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 640 Mbytes per cartridge

JIS X 6242:1998 80 mm 数字化视频光盘(DVD).只读光盘

80 mm DVD -- Read only disk

JIS X 6243:1998 120 mm DVD 可重写光盘(DVD-RAM)

この規格は，120mmDVD-書換形ディスク(以下，ディスクという。)の互換性を可能にする機械的特性，物理的特性及び光学的特性を規定するとともに，情報交換を可能にする記録した信号の品質，データのフオーマット及び記録方法について規定する。

120 mm DVD Rewritable Disk (DVD-RAM)

JIS X 6244:1998 120 mm DVD-RAM 光盘

この規格は，120mm DVD-RAMディスクに使用するためのケースの特性を規定する。この規格は，関連するが仕様の異なる次の三つのタィプについて規定する。

Case for 120 mm DVD-RAM Disks

ANSI/INCITS/ISO/IEC 15486:1998 信息技术.利用不可逆效果的WORM(一写多读)型130mm盒式光盘上的数据交换.容量:每盒2.6GB

This International Standard specifies the characteristics of a 130 mm Optical Disk Cartridge (ODC) of the Type WORM (Write Once Read Many) with a capacity of 2, 6 Gbytes. Type WORM ODCs use writing effects that are inherently irrevers.

Information Technology - Data Interchange on 130 mm Optical Disk Cartridges of Type WORM (Write Once Read Many) using Irreversible Effects - Capacity: 2,6 Gbytes per Cartridge

ANSI/INCITS/ISO/IEC 15898:1998 信息技术.用于信息交换的使用相变技术的扩展容量的356mm盒式光盘

This International Standard specifies the characteristics of 356 mm Optical Disk Cartridges (ODCs) of the type providing for information to be written once and read many times.

Information Technology - 356 Optical Disk Cartridges, Extended Capacity, Using Phase Change Technology for Information Interchange

ISO/IEC 14760:1997 信息技术 使用相变的90mm可重写和只读盒式光盘上的数据交换 容量:每盒1.30GB

This International Standard specifies the characteristics of 90 mm Optical Disk Cartridges (ODCs) using the phase change technology, with a capacity of 1,3 Gbytes per cartridge. It specifies three related Types of such cartridges. Type R/W Provides for data to be written or overwritten and read many times over the recording surface of the disk using the phase change overwritable effect. Type P-ROM Provides for a part of the recording surfaces of the disk to be embossed by stamping or other means. This part of the disk is read without recourse to the phase change overwritable effect. All parts which are not embossed provide for data to meet the requirements of Type R/W. Type O-ROM Provides for the whole of the recording surfaces of the disk to be embossed and reproduced by stamping or other means. This type of disk is read without recourse to the phase change overwritable effect. For each Type, this International Standard provides for 512-byte and 2 048-byte sectors. All sectors of a given cartridge have the same size. Type R/W, Type P-ROM and Type O-ROM are also referred to as "fully overwritable", "partially embossed" and "fully embossed", respectively. This International Standard specifies - the conditions for conformance testing and the Reference Drive; - the environments in which the cartridges are to be operated, stored and transported; - the mechanical and physical characteristics of the cartridge, so as to provide mechanical interchangeability between data processing systems; - the format of the information on the disk, both embossed and user-written; including the physical disposition of the tracks and sectors, the error correction codes, and the modulation method used; - the characteristics of the embossed information on the disk; - the phase change overwritable characteristics of the disk, enabling processing systems to overwrite data onto the disk; - the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk. This International Standard provides for interchange between optical disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information technology - Data interchange on 90 mm overwritable and read only optical disk cartridges using phase change - Capacity: 1,3 Gbytes per cartridge

ISO/IEC 15498:1997 信息技术.90mm盒式光盘上的数据交换.HS-1格式.容量:每盒650Mbytes

This International Standard specifies the characteristics of 90 mm Optical Disk Cartridges (ODC) with a capacity of 650 Mbytes per Cartridge. The Standard specifies three related, but different implementations of such cartridges, viz. Type R/W Provides for data to be written and read many times over the recording surface of the disk using the thermo-magnetic and magneto-optical effects. Type P-ROM Provides for a part of the recording surface of the disk to be embossed by stamping or other means. This part of the disk is read without recourse to the magneto-optical effect. The part which is not embossed provides for data to meet the requirements of Type R/W. Type O-ROM Provides for the recording surface of the disk to be embossed and reproduced by stamping or other means. This type of disk is read without recourse to the magneto-optical effect. Type R/W, Type P-ROM and Type 0-ROM are also referred to as "fully rewritable", "partially embossed" and "fully embossed", respectively. This International Standard specifies - the conditions for conformance testing and the Reference Drive; - the environments in which the cartridges are to be operated and stored; - the mechanical and physical characteristics of the cartridge, so as to provide mechanical interchangeability between data processing systems; - the format of the information on the disk, called HS-1 (HS stands for "Hyper-Storage"), including the physical disposition of the tracks and sectors, the error correction codes, and the recording method used; - the characteristics of the embossed information on the disk; - the magneto-optical characteristics of the disk, enabling processing systems to write data onto the disk; - the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk. This International Standard provides for interchange between optical disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information technology - Data interchange on 90 mm optical disk cartridges - HS-1 format - Capacity: 650 Mbytes per cartridge

ISO/TR 12654:1997 电子成像 在WORM光盘上记录证据文件的电子记录系统推荐的管理方法

This Technical Report makes recommendations to be followed in establishing procedures for the capture and storage of electronic images of documents that will ensure the preservation and integrity of the information recorded on the documents. This Technical Report applies to optical storage systems that use only media of a non-reversible Write-Once-Read-Many (WORM) type including compact disk (CD-ROM) to store electronic images of documents. It does not apply to systems that allow an image to be erased or altered after capture.

Electronic imaging - Recommendations for the management of electronic recording systems for the recording of documents that may be required as evidence, on WORM optical disk

ISO/IEC 15485:1997 信息技术 使用相变PD格式的120mm盒式光盘上的数据交换 容量:每盒650MB

This International Standard specifies the characteristics of 120 mm Optical Disk Cartridges (ODCs) with a capacity of 650 Mbytes using Phase Change PD format. This present International Standard specifies two related, but different implementations of such cartridges, viz. Type R/W Provides for data to be written, read and overwritten many times over the whole recording surface of the disk using the phase change recording and read-out method . Type WORM Provides for data to be written once and read many times over the whole recording surface of the disk using the phase change recording and read-out method. Type R/W and Type WORM are also referred to as "rewritable" and "write-once" respectively. This International Standard specifies - the conditions for conformance testing and the Reference Drive; - the environments in which the cartridges are to be operated and stored; - the mechanical and physical characteristics of the cartridge, so as to provide mechanical interchangeability between data processing systems; - the format of the information on the disk known as the PD format; including the physical disposition of the tracks and sectors, the error correction codes, and the modulation method used; - the characteristics of the embossed information on the disk; - the phase change recording characteristics of the disk, enabling data processing systems to write data onto the disk; - the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk. This International Standard provides for interchange between optical disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Information technology - Data interchange on 120 mm optical disk cartridges using phase change PD format - Capacity: 650 Mbytes per cartridge

JIS X 6274:1997 信息技术.信息交换用 130 mm 盒式光盘.容量:每盒 2 千兆字节

この規格は，次の事項について規定する。

Information technology -- 130 mm optical disk cartridges for information interchange -- Capacity: 2 Gbytes per cartridge