35.240.60 信息技术在运输和贸易中的应用 标准查询与下载

ISO 23795-1:2022 智能运输系统.使用游牧和移动设备提取用于估算CO2排放量的行程数据.第1部分:车队管理的燃油消耗测定

This document specifies a method for the determination of fuel consumption and resulting CO2 emissions to enable fleet managers to reduce fuel costs and greenhouse gas (GHG) emissions in a sustainable manner. The fuel consumption determination is achieved by extracting trip data and speed profiles from the global navigation satellite system (GNSS) receiver of a nomadic device (ND), by sending it via mobile communication to a database server and by calculating the deviation of the mechanical energy contributions of: a) aerodynamics, b) rolling friction, c) acceleration/braking, d) slope resistance and e) standstill, relative to a given reference driving cycle in [%]. As the mechanical energy consumption of the reference cycle is known by measurement with a set of static vehicle configuration parameters, the methodology enables drivers, fleet managers or logistics service providers to calculate and analyse fuel consumption and CO2 emissions per trip by simply collecting trip data with a GNSS receiver included in an ND inside a moving vehicle. In addition to the on-trip and post-trip monitoring of energy consumption (fuel, CO2), the solution also provides information about eco-friendly driving behaviour and road conditions for better ex-ante and ex-post trip planning. Therefore, the solution also allows floating cars to evaluate the impact of specific traffic management actions taken by public authorities with the objective of achieving GHG reductions within a given road network. The ND is not aware of the characteristics of the vehicle. The connection between dynamic data collected by the ND and the static vehicle configuration parameters is out of scope of this document. This connection is implementation-dependent for a software or application using the described methodology which includes static vehicle parameters and dynamic speed profiles per second from the ND. Considerations of privacy and data protection of the data collected by a ND are not within the scope of this document, which only describes the methodology based on such data. However, software and application developers using the methodology need to carefully consider those issues. Nowadays, most countries and companies are required to be compliant with strict and transparent local regulations on privacy and to have the corresponding approval boards and certification regulations in force before bringing new products to the market.

Intelligent transport systems — Extracting trip data using nomadic and mobile devices for estimating C02 emissions — Part 1: Fuel consumption determination for fleet management

T/GDGJ 001-2022 出租汽车车载智能终端设备计程计价技术规范

本文件的主要内容是基于GB/T 22485 《出租汽车运营服务规范》、JJF 1578-2016 《网络预约出租汽车计程计时技术要求（试行）》系列标准的综合内容，结合国内的实际应用情况而编写的，其中车载终端的要求参考JT/T905.2-2014《出租汽车服务管理信息系统第2部分：运营专用设备》编写。 为规范出租车汽车车载智能终端设备计程计价功能应用，统一推进该功能的建设和使用，制定本文件技术要求。 主要技术内容包括：智能终端设备计程计价技术要求、试验项目、试验方法、CAN通信规范、计程计价数据上报规范等。

Technical specifications for metering and pricing of vehicle-mounted intelligent terminal equipment for taxis

GSO ASTM F3218:2022 记录 A-UGV 测试方法使用的环境条件的标准实施规程

When conducting test methods, it is important to consider the role that the environmental conditions play in the Automatic through Autonomous – Unmanned Ground Vehicle (A-UGV) performance. Various A-UGVs are designed to be operated both indoors and outdoors under conditions specified by the manufacturer. Likewise, end users of the A-UGV will be operating these vehicles in a variety of environmental conditions. When conducting and replicating F45 test methods by vehicle manufacturers and users, it is important to specify and document the environmental conditions under which the A-UGV is to be tested as there will be variations in vehicle performance caused by the conditions, especially when comparing and replicating sets of test results. It is also important to consider changes in environmental conditions during the course of operations (for example, transitions between conditions). As such, environmental conditions specified in this practice are static, dynamic, or transitional, or combinations thereof; with the A-UGV stationary or in motion. This practice provides brief introduction to the following list of environmental conditions that can affect performance of the A-UGV: Lighting, External sensor emission, Temperature, Humidity, Electrical Interference, Air quality, Ground Surface, and Boundaries. This practice then breaks down each condition into sub-categories so that the user can document the various aspects associated with the category prior to A-UGV tests defined in ASTM F45 Test Methods (for example, F3244). It is recommended that salient environment conditions be documented when conducting F45 test methods

Standard Practice for Documenting Environmental Conditions for Utilization with A-UGV Test Methods

22/30427966 DC BS EN 16454 智能交通系统 电子安全 ECall端到端一致性测试

BS EN 16454. Intelligent transport systems. ESafety. ECall end to end conformance testing

DB4401/T 160-2022 基于智慧灯杆的道路车辆数据接口技术规范

Technical specifications for road vehicle data interface based on smart light poles

T/NJSTA 001-2202 智能停车系统技术标准

智能停车系统处理层应提供数据分析结果，统一数据分析结果展示格式，方便各停车场管理者、其他第三方之间的数据分析结果查询、导出、交互以及对数据进一步分析。 应对数据共享与交换过程进行记录，记录内容应包括共享与交换数据内容、共享与交换双方身份、共享与交换时间等。 应对数据分级分类处理，应按照数据级别明确使用放对共享数据的使用权限，并将数据分级分类储存。 智能停车系统在数据共享与交换过程中应对数据进行定期维护，保证共享数据的完整、准确和有效。 应能对共享数据更新和失效数据召回机制。 应对敏感数据进行脱敏，应对数据脱敏过程进行记录，记录内容应该包括操作时间、操作人、操作数据等。 对数据脱敏时应保留敏感数据的格式、属性以及非敏感数据。

The technical specification for Intelligent parking system

T/CCTAS 28-2022 城市轨道交通数据采集平台技术规范

文件规定了城市轨道交通数据采集平台的总体要求、平台功能、技术架构、采集内容、典型数据采集编码要求、技术要求、安全要求和接口要求等。通过规范数据采集的通用范围、数据颗粒度、基础专业数据采集编码格式，实现城市轨道交通采集数据管理科学化和规范化，为建设和完善城市轨道交通数据采集平台提供指导和借鉴。

Technical specification for data acquisition platform of Urban Rail Transit

T/GDAQI 82-2022 网络交易平台产品质量信息展示管控规范

本文件规定了网络交易平台产品质量信息展示的基本要求、信息展示，以及信息展示的管理与评价。 本文件适用于网络交易平台经营者、平台内经营者对其所售产品的质量信息展示的管理，也适用于第三方机构对平台产品展示的评价。 其他平台或经营者可参照执行。

Management and control specification for quality information display of product on network transaction platform

T/CQCBDS 0054-2022 基于BFS的线上服务系统的应用架构规范

本文件是《基于BFS的线上服务系统的应用架构规范》标准，本文件适用于线上服务系统的智能化设计需要。

Application architecture specification of online service system based on BFS

T/CATAGS 50-2022 销售代理销售国内客票运价数据应用规范

本文件规定了国内客票销售代理对运价数据应用时的场景、数据处理流程和接口报文结构。 本文件适用于国内客票销售代理对运价数据的应用。

Application specification for sales agent sales of domestic passenger ticket freight data

T/CATAGS 51-2022 航空器载运机组人员API数据传输规范

本文件规定了航空器载运机组人员预检信息交换内容和接口定义。本文件适用于航空公司各系统间航空器载运机组人员预检信息的交换。

API Data Transmission Specification for Aircraft Carrying Crew

T/CATAGS 49-2022 旅客国内运输价格数据规范

本文件规定了旅客国内运输价格数据的分类、数据元定义、数据格式、数据存储要求。 本文件适用于国内航空公司制定国内运输机票价格时参照使用。

Data specification for passenger domestic transportation price

T/SDAS 366-2022 高铁接触网巡检数据传输与智能识别系统 功能要求

本文件规定了高铁接触网巡检数据传输与智能识别系统（以下简称“巡检数据传输与智能识别系统”）的系统总体框架、系统构成、功能组成及各功能要求等内容。 本文件适用于巡检数据传输与智能识别系统的设计、开发和实施，可作为选择或评价巡检数据传输与智能识别系统时的依据。

Functional requirements for high-speed railway catenary inspection data transmission and intelligent identification system

ISO 12855:2022 电子收费.服务提供和收费之间的信息交换

This document specifies: — the interfaces between electronic fee collection (EFC) back-office systems for vehicle-related transport services, e.g. road user charging, parking and access control; — an exchange of information between the back end system of the two roles of service provision and toll charging, e.g.: — charging-related data (toll declarations, billing details), — administrative data, and — confirmation data; — transfer mechanisms and supporting functions; — information objects, data syntax and semantics. This document is applicable for any vehicle-related toll service and any technology used for charging. The data types and associated coding related to the data elements described in Clause 6 are defined in Annex A, using the abstract syntax notation one (ASN.1) according to ISO/IEC 8824-1. This document specifies basic protocol mechanisms over which implementations can specify and perform complex transfers (transactions). This document does not specify, amongst others: — any communication between toll charger (TC) or toll service provider (TSP) with any other involved party; — any communication between elements of the TC and the TSP that is not part of the back-office communication; — interfaces for EFC systems for public transport; — any complex transfers (transactions), i.e. sequences of inter-related application data units (ADUs) that can possibly involve several application protocol data unit (APDU) exchanges; — processes regarding payments and exchanges of fiscal, commercial or legal accounting documents; and — definitions of service communication channels, protocols and service primitives to transfer the APDUs.

Electronic fee collection — Information exchange between service provision and toll charging

T/CITSA 20-2022 道路交叉路口交通信息全息采集系统通用技术条件

本标准基于道路交叉路口的技术实现、设备应用以及交通管理的实际业务场景，规定了交通信息全息采集系统的系统组成、功能要求和性能要求，提出了前端采集单元、边缘计算单元的技术要求和业务应用平台的功能范围，并对边缘计算单元与信号机的数据交互格式作了约定。本标准为公安交通管理领域道路交叉路口交通信息采集管理系统的规划和建设，以及交通信息采集系统业务和前端、边缘设备的设计和开发提供参考。

General specification for traffic information holographic acquisition system of road intersection

ISO/TS 5255-1:2022 智能运输系统.低速自动驾驶系统（LSADS）服务.第1部分:角色和功能模型

Intelligent transport systems — Low-speed automated driving system (LSADS) service — Part 1: Role and functional model

T/CCTDA 003-2022 碳中和数字港口管理系统技术标准

本文件规定了碳中和数字港口管理系统的术语和定义、系统构成、总则、基本要求、功能要求、安全要求。

Technical standard for digital port management system of carbon neutral

T/CCTDA 002-2022 碳中和数字铁运管理系统技术标准

本文件规定了碳中和数字铁运管理系统的术语和定义、系统构成、总则、基本要求、功能要求、安全要求。

Technical standard for digital railway transportation management system of carbon neutral

T/CCTDA 001-2022 碳中和数字地销管理系统技术标准

本文件规定了碳中和数字地销管理系统的术语和定义、系统构成、总则、基本要求、功能要求、安全要求。

Technical standard for digital management system for sales by road transportation of carbon neutral

T/CATAGS 38-2022 民航旅游产品动态打包查询预订数据规范

本文件规定了国内航空公司作为旅游产品动态打包的服务提供商时，进行动态打包查询与预订采用的数据规范。 本文件适用于使用信息系统销售国内航空公司提供的多旅游产品动态打包时，与国内航空公司之间的数据交换。

Data specification for dynamic package query and reservation of civil aviation tourism products