3570 标准查询与下载

ISO 9982:1991 皮带传动.工业用皮带轮和涌带肋皮带.尺寸.PH,PJ,PK,PL和PM型材

Belt drives; pulleys and V-ribbed belts for industrial applications; dimensions; PH, PJ, PK, PL and PM profiles

ISO 9981:1990 皮带传动.自动工业用皮带轮和V型肋带.尺寸.PK轮廓

Belt drives; pulleys and V-ribbed belts for the automotive industry; dimensions; PK profile

ISO 4183:1989 皮带传动.标准的和窄型三角皮带.皮带轮

Belt drives; classical and narrow V-belts; grooved pulleys (system based on datum width)

ISO 155:1989 皮带传动.皮带轮.中心调整极限值

Belt drives; pulleys; limiting values for adjustment of centres

ISO 9608:1988 V型皮带.皮带的均匀性.中心距离的变化.规范及测试方法

V-belts; uniformity of belts; centre distance variation; specifications and test method

DIN 65052:1988 航空航天.控制钢索的滑轮.技术规范

This technical specification applies to pulleys for control cables for aerospace use if it is referred to in the dimensional standards or drawings.

Aerospace; pulleys for control cables; technical specification

ISO 8419:1987 窄接合型三角皮带.有效长度

Narrow joined V-belts; Lengths in effective system

DIN 8192:1987 DIN8187规定的滚子链的链轮.尺寸

These chain wheels are used to transmit power by means of roller chains according to DIN 8187 in chain drives according to DIN 8195. The tooth form of the chain wheels corresponds to DIN 8196 part 1 and can be produced by self-generating method with tools having a profile form in accordance with DIN 8197 or with profile cutters in accordance with DIN 8198.

Chain wheels for roller chains as specified in DIN 8187; dimensions

DIN 71986:1985 控制缆索.综述.应用示例

Control cables; summary, application examples

ISO 100:1984 平皮带传动的皮带轮.轮冠

Pulleys for flat transmission belts; Crowns

DIN 71989:1982 控制钢丝绳的调整螺钉

Adjusting screws for cables for controls

Adjusting screws for cables for controls

DIN 71992:1982 控制装置电缆用的带孔连接件

Eye-fittings for cable for controls

Eye-fittings for cable for controls

DIN 71991:1982 控制装置电缆用带螺纹的接头

Threaded end-fittings for cables for controls

Threaded end-fittings for cables for controls

DIN 2218:1976 机械工程用环形三角皮带.传动力、额定功率的计算

V-belts for industrial purposes; calculation of drives; power ratingsZusammenhang mit den Arbeiten der International Organization for Standardization (ISO), siehe Erl?uterungen.

Endless V-belts for Mechanical Engineering; Calculation of Drives, Power Ratings

ISO 99:1975 平皮带传动的皮带轮.直径

Pulleys for flat transmission belts; Diameters

ISO 22:1975 平传动皮带及其皮带轮.宽度

Flat transmission belts and corresponding pulleys; Widths

ISO 63:1975 传动平皮带.长度

Flat transmission belts; Lengths

DIN 2216:1972 开端的三角皮带.尺寸

Open ended V-belts, dimensionsZusammenhang mit den von der International Organization for Standardization (ISO) herausgegebenen Empfehlungen ISO/R 52 - 1957 und ISO/R 253 - 1962 siehe Erl?uterungen.

Open Ended V-belts; Dimensions

VSM 15425-1972 固定联轴器．型号 R（摩擦阻力）带有长套筒，适用于圆柱形轴端．螺栓圆周直径的主要尺寸k=215...850 mm

Fixed coupling. Type R (friction resistance) with long sleeve, suitable for cylindrical shaft ends. The main dimensions of the bolt circumferential diameter k=215...850 mm

VSM 15426-1972 切刀横截面．刀柄和车削毛坯的尺寸及材料

Cross section of cutter. Dimensions and materials of tool holders and turning blanks