37.040.20 相纸、胶卷和暗盒 标准查询与下载
共找到 743 条与 相纸、胶卷和暗盒 相关的标准，共 50 页
Imaging materials. Processed colour photographs. Methods for measuring thermal stability
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2012-05-31
- 实施
- 2012-05-31
本标准规定了彩色电影正片的感光度和格码的求取方法以及试验条件。 本标准适用于彩色电影正片的感光度及格码的测定，此类胶片用于通过底片印刷正片制作成彩色电影发行拷贝。本标准同时也适用于制作幻灯片的彩色正片材料的感光度及格码测定。
Determination of color motion picture positive film sensitivity speed and gamma
- ICS
- 37.040.20
- CCS
- G80
- 发布
- 2012-05-24
- 实施
- 2012-11-01
Imaging materials. Wet-processed silver-gelatin type black-and-white photographic reflection prints. Specifications for dark storage
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2012-04-30
- 实施
- 2012-04-30
Imaging materials - Wet-processed silver-gelatin type black-and-white photographic reflection prints - Specifications for dark storage
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2012-04-01
- 实施
This International Standard describes test methods for determining the long-term dark storage stability of colour photographic images. It is applicable to colour photographic images made with traditional photographic materials. These images are generated with chromogenic, silver dye-bleach, dye transfer, dye-diffusion-transfer “instant” systems and similar systems. The test method specified in this International Standard also covers the dark-stability of digital colour images produced with dry- and liquid-toner electrophotography, thermal dye transfer (sometimes called “dye sublimation”), and inkjet printing systems.
Imaging materials - Processed colour photographs - Methods for measuring thermal stability
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2012-04
- 实施
Imaging materials - Reflection colour photographic prints - Test print construction and measurement
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2012-04
- 实施
Imaging materials -- Processed photographic reflection prints -- Storage practices (Amendment 1)
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2012-03-21
- 实施
Imaging materials. Reflection colour photographic prints. Method for testing humidity fastness
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2012-01-31
- 实施
- 2012-01-31
Imaging materials. Colour reflection prints. Test method for ozone gas fading stability
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2011-12-31
- 实施
- 2011-12-31
이 표준에서는 사진 재료의 해상력을 결정하는 방법에 대해 기술하고 있다. 사진 재료란 흑백
Photography－Photographic materials－Determination of KS resolving power
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2011-12-27
- 实施
- 2011-12-27
Photography－Photographic materials－Determination of KS resolving power
- ICS
- 37.040.20
- CCS
- 发布
- 2011-12-27
- 实施
Photography－Photographic materials－Determination of KS resolving power
- ICS
- 37.040.20
- CCS
- 发布
- 2011-12-27
- 实施
本标准规定了阳图型PS版的要求、试验方法、检验规则、包装及标志、贮存和运输。 本标准适用于经粗化和阳极氧化处理过的铝板基为支持体的阳图型PS版，适用于接触曝光的真空晒版机、连晒机和自动显影机及手工冲洗加工工艺。
Positive-acting presensitized offset plate
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2011-12-20
- 实施
- 2012-07-01
This International Standard describes test methods for evaluating reflection colour photographic prints with regard to changes in image appearance resulting from exposure to both low and high relative humidity. The observed changes relate to colour, tone and loss of sharpness caused by horizontal and vertical diffusion of colorants from exposure to elevated humidity levels. Other humidity-related factors, such as mould and mildew growth, and physical damage, such as curl, cockle, cracking or delamination due to humidity cycling, are outside the scope of this test method. Although the method and procedures described in this International Standard can be used to test any colour hardcopy technology, it is particularly appropriate to systems where the colorants are applied by a mechanism involving the diffusion of colorant into image-receiving layers, for example inkjet or dye diffusion processes, and to certain types of inkjet media that are susceptible to Dmin yellowing.
Imaging materials - Reflection colour photographic prints - Method for testing humidity fastness
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2011-12
- 实施
This International Standard describes the equipment, methods and procedures for generating a known ozone exposure and the subsequent measurement and quantification of the amount of change produced within both digitally printed hardcopy images and traditional analogue photographic colour print images due to that exposure. The test method described in this International Standard uses increased levels of ozone to achieve an accelerated test. If the principal “gas fading” mechanism for a system is not ozone, this method might not be suitable and might give misleading results as to resistance of the test image to polluted air.
Imaging materials - Colour reflection prints - Test method for ozone gas fading stability
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2011-12
- 实施
In-plane length measurements are used in calculations of parameters, such as residual strain and Youngrsquo;modulus. In-plane deflection measurements are required for specific test structures. Parameters, including residual strain, are calculated given these in-plane deflection measurements.1.1 This test method covers a procedure for measuring in-plane lengths (including deflections) of patterned thin films. It applies only to films, such as found in microelectromechanical systems (MEMS) materials, which can be imaged using an optical interferometer.1.2 There are other ways to determine in-plane lengths. Using the design dimensions typically provides more precise in-plane length values than using measurements taken with an optical interferometer. (Interferometric measurements are typically more precise than measurements taken with an optical microscope.) This test method is intended for use when interferometric measurements are preferred over using the design dimensions (for example, when measuring in-plane deflections and when measuring lengths in an unproven fabrication process).1.3 This test method uses a non-contact optical interferometer with the capability of obtaining topographical 3-D data sets. It is performed in the laboratory.1.4 The maximum in-plane length measured is determined by the maximum field of view of the interferometer at the lowest magnification. The minimum deflection measured is determined by the interferometers pixel-to-pixel spacing at the highest magnification.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
- ICS
- 37.040.20
- CCS
- 发布
- 2011-11-01
- 实施
Imaging materials. Reflection prints. Storage practices
- ICS
- 37.040.20
- CCS
- A14
- 发布
- 2011-10-31
- 实施
- 2011-10-31
This International Standard specifies dark storage conditions, storage facilities and procedures for the handling and inspection of reflection prints of all types and sizes. This International Standard is applicable to prints on the following opaque supports: a) fibre-base paper; b) RC (resin coated) paper; c) pigmented and other types of plastic supports, e.g. polyester, cellulose acetate; d) fabric, e.g. canvas, linen. This International Standard is applicable to the following processed black-and-white silver gelatine prints: 1) wet-processed, including those that have been chemically treated to improve the permanence of the silver image and/or to modify its colour, e.g. with gold, selenium or sulphur formulations; 2) diffusion transfer, e.g. Polaroid and Fuji Photo Film instant prints1); 3) stabilization-processed (which contain the silver image as well as invisible, chemically stabilized silver halides). This International Standard is applicable to the following processed multicolour and monochrome colour photographic prints: i) chromogenic, washed and stabilized; ii) silver dye bleach; iii) dye transfer; iv) diffusion transfer, e.g. Polaroid and Fuji Photo Film instant prints1), peel-apart or integral; v) pigmented gelatine, e.g. carbon, carbro. This International Standard is applicable to black-and-white and colour prints made with the following systems: — thermal dye transfer (commonly referred to as dye sublimation); — thermal wax transfer; — electro-photographic; — dye and pigmented ink jet; — swellable and porous-coated media supports; — diazo. 1) Polaroid and Fuji Photo Film instant prints are examples of suitable products available commercially. This information is given for the convenience of users of this International Standard and does not constitute an endorsement by ISO of these products. 1 Recommendations for storage of photographic films and storage of processed photographic plates are given This International Standard is applicable to medium-term and extended-term storage conditions, as defined in Clause 3.
Imaging materials - Reflection prints - Storage practices
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2011-10
- 实施
Radiation sensitive films - Cellulose nitrate film - Part 3: Terms and definitions, properties, utilization, storage
- ICS
- 37.040.20
- CCS
- G81
- 发布
- 2011-02
- 实施
本标准规定了喷墨打印用透明胶片的要求、检验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于用作水基墨水喷墨打印的透明胶片。
Clear film for inkjet printing
- ICS
- 37.040.20
- CCS
- G80
- 发布
- 2010-11-22
- 实施
- 2011-03-01
