37.040.20 相纸、胶卷和暗盒 标准查询与下载

KS A ISO 18055-1:2006 摄影和成像.喷墨介质:分类、命名和尺寸.第1部分:摄影级介质(相纸和胶片)

이 규격은 사진 출력용 잉크젯 종이의 명칭과 형식, 필름의 두께 및 무게에 관한 등급에 대

Photography and imaging－Inkjet media：Classification, nomenclature and dimensions－Part 1：Photo-grade media(paper and film)

KS A ISO 14807:2006 摄影.投影式和反射式浓度界限.性能测定方法

이 규격은 일반적인 변수들을 기록하는 형식에 대해 정의하고 있으며 제조업자가 기록한 기능에

Photography－Transmission and reflection densitometers－Method for determining performance

ISO 18909:2006 摄影.处理过的摄影彩色胶片和纸张印迹.测量呈象稳定度方法

This International Standard describes test methods for determining the long-term dark storage stability of colour photographic images and the colour stability of such images when subjected to certain illuminants at specified temperatures and relative humidities. This International Standard is applicable to colour photographic images made with traditional, continuous-tone photographic materials with images formed with dyes. These images are generated with chromogenic, silver dye-bleach, dye transfer, and dye-diffusion-transfer instant systems. The tests have not been verified for evaluating the stability of colour images produced with dry- and liquid-toner electrophotography, thermal dye transfer (sometimes called dye sublimation), ink jet, pigment-gelatine systems, offset lithography, gravure and related colour imaging systems. This International Standard does not include test procedures for the physical stability of images, supports or binder materials. However, it is recognized that in some instances, physical degradation such as support embrittlement, emulsion cracking or delamination of an image layer from its support, rather than image stability, will determine the useful life of a colour film or print material.

Photography - Processed photographic colour films and paper prints - Methods for measuring image stability

DIN ISO 18910:2005 成像材料.照片的胶片和相纸.卷曲度测定 (ISO 18910-2000)

This International Standard specifies methods for determining and quantitatively expressing the curl characteristics of unprocessed and processed photographic film and paper in sheet, roll or strip formats. It specifies three measuring methods: method A involves the determination of curl when the specimen is held in a vertical position, methods B and C with the specimen in a horizontal position. The values for the three methods are not comparable because of the differences in specimen configuration and size. These methods are not intended for use in determining the curl characteristics of photographic materials during processing or drying.

Imaging materials - Photographic film and paper - Determination of curl (ISO 18910:2000);English version of DIN ISO 18910:2005

ASTM E2244-05 使用光学干涉仪测量薄膜 反射膜的面内长度的标准测试方法

In-plane length measurements are used in calculations of parameters, such as residual strain and Youngrsquo;modulus. In-plane deflection measurements are required for specific test structures. Parameters, including residual strain, are calculated given these in-plane deflection measurements.1.1 This test method covers a procedure for measuring in-plane lengths (including deflections) of patterned thin films. It applies only to films, such as found in microelectromechanical systems (MEMS) materials, which can be imaged using an optical interferometer.1.2 There are other ways to determine in-plane lengths. Using the design dimensions typically provides more precise in-plane length values than using measurements taken with an optical interferometer. (Interferometric measurements are typically more precise than measurements taken with an optical microscope.) This test method is intended for use when interferometric measurements are preferred over using the design dimensions (for example, when measuring in-plane deflections and when measuring lengths in an unproven fabrication process).1.3 This test method uses a non-contact optical interferometer with the capability of obtaining topographical 3-D data sets. It is performed in the laboratory.1.4 The maximum in-plane length measured is determined by the maximum field of view of the interferometer at the lowest magnification. The minimum deflection measured is determined by the interferometers pixel-to-pixel spacing at the highest magnification.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer

DIN ISO 2240:2005 摄影.照相彩色反转片.ISO感光速度的测定

This International Standard specifies the method for determining the ISO speed of colour reversal camera films producing continuous-tone pictorial images that are intended to be viewed on transparency illuminators or by projection as slides. It also applies to 8 mm and 16 mm motion-picture films used in non-professional applications. This International Standard is not applicable to professional motion-picture films regardless of their applications

Photography - Colour reversal camera films - Determination of ISO speed (ISO 2240:2003)

KS M 3907-2005 135 尺寸的电影和杂志

135-SIZE FILMS AND MAGAZINES

KS M 3906-2005 一般用途相纸

POTOGRAPHIC PAPER FOR GENERAL USE

KS M 3905-2005 一般用途相纸的感光度和等级

SENSITIVITY AND GRADE OF PHOTOGRAPHIC PAPER FOR GENERAL USE

KS M 3909-2005 一般用途胶片的尺寸

DIMENSIONS FOR PHOTOGRAPHIC SHEET FILMS FOR GENERAL USE

KS M 3904-2005 通用相纸感光性能测试方法

TESTING METHOD OF PHOTOCHARACTERISTIC OF PHOTOGRAPHIC PAPER FOR GENERAL USE

KS M 3859-2005 静态摄影和直接投影电影摄影用彩色反转相机胶片 ISO 感光度的测定

DETERMINATION OF ISO SPEED OF COLOUR REVERSAL CAMERA FILMS FOR STILL PHOTOGRAPHY AND DIRECT PROJECTION MOTION-PICTURE PHOTOGRAPHY

KS M 3912-2005 负片感光材料对日光和人造光的感光度指标及测量方法的规范

SPECIFICATION OF EXPOSURE INDEX AND MEASURING METHOD OF PHOTOGRAPHIC SENSIT IVITY OF NEGATIVE PHOTOGRAPHIC SENSITIVE MATERIALS TO DAYLIGHT AND ARTIFICIAL LIGHT

DIN ISO 897:2005 摄影.126、110和135规格胶卷.成相面的识别

This International Standard specifies different means of identification of the image-bearing side of roll films and 126, 110 and 135 size films that carry edge markings. This International Standard is not applicable to cinematographic films.#,,#

Photography - Roll films, 126, 110 and 135-size films - Identification of the image-bearing side (ISO 897:2000)

KS A ISO 10977-2005 摄影－处理过的彩色摄影胶片和打印纸－图像稳定性的测量方法

Photography－Processed photographic colour films and paper prints－Methods for measuring image stability

KS A ISO TR 18931:2005 成像材料.湿度测量和调节的建议

이 규격은 이미징 재료를 위한 실험실과 저장소에서 상대 습도(RH)를 측정하고 조절하는 데

Imaging materials－Recommendations for humidity measurement and control

KS A ISO 18902:2005 成像材料.已加工的成像材料.相册、框架和存储材料

이 규격은 현상된 사진 필름, 감광판, 인화지를 보관하기 위해 설계된 보관 재료(enclo

Imaging materials-Processed photographic films, plates and papers-Filing enclosures and storage containers

KS A ISO 18924:2005 成像材料.阿伦尼乌斯型预测试验方法

이 규격은 이미징 재료의 물리적ㆍ화학적 변화를 예측하기 위한 시험 방법에 대하여 규정한다.

Imaging materials-Test method for Arrhenius-type predictions

KS A ISO 10977:2005 摄影－处理过的彩色摄影胶片和打印纸－图像稳定性的测量方法

Photography－Processed photographic colour films and paper prints－Methods for measuring image stability

KS A ISO TR 18931-2005(2020) 成像材料湿度测量和控制建议

Imaging materials－Recommendations for humidity measurement and control