37.040.20 相纸、胶卷和暗盒 标准查询与下载

ISO 18920:2000 成像材料 处理过的摄影反射光印相 贮存规程

1 This International Standard specifies dark storage conditions, storage facilities, and procedures for the handling and inspection of photographic reflection prints of all types and sizes. 2 This International Standard is applicable to photographic reflection prints on the following opaque supports: — fibre-base paper; — RC (resin coated) paper; — plastic films (polyester, cellulose acetate, etc.). 2.1 This International Standard is applicable to the following black-and-white silver gelatin prints: — wet-processed, including those that have been chemically treated to improve the permanence of the silver image and/or to modify its colour (e.g. with gold, selenium or sulfur formulations); — diffusion transfer (e.g. Polaroid and Fuji Photo Film instant prints); — stabilization-processed (which contain the silver image as well as invisible, chemically stabilized silver halides); — heat-processed. 2.2 This International Standard is applicable to the following multicolour and monochrome photographic prints: — chromogenic, washed and stabilized; — silver dye bleach; — dye transfer; — diffusion transfer (e.g. Polaroid and Fuji Photo Film instant prints, peel-apart or integral); — pigmented gelatin (carbon, carbro, etc.). 2.3 This International Standard is applicable to black-and-white and colour photographic reflection prints made with the following systems: — thermal dye transfer (commonly referred to as dye sublimation); — thermal wax transfer; — electrophotographic; — ink jet; — diazo. 3 Recommendations for storage of photographic films are given in ISO 18911 and for storage of processed photographic plates in ISO 18918. Print material on translucent film supports intended to be viewed primarily by transmitted light should be stored in accordance with ISO 18911. 4 This International Standard is applicable to medium-term and extended-term storage conditions as defined in clause 3. note: 1) Polaroid and Fuji Photo Film instant prints are examples of suitable products available commercially. This information is given for the convenience of users of this International Standard and does not constitute an endorsement by ISO of these products.

Imaging materials - Processed photographic reflection prints - Storage practices

BS ISO 6328:2000 摄影.照像材料.ISO分辨率的测定

This International Standard specifies a method for determining the resolving power of photographic films, plates and papers, including black-and-white films, black-and-white printing papers, colour-reversal films, colour-negative films, and colour-printing papers. Materials designed for X-ray and other high-energy radiation are excluded, as are photographic materials used in medical radiography where the exposure source is an intensifying screen in contact with the film (sensitized on one or two sides). Also excluded are materials having photo-polymer, diazo, etc. light-sensitive layers.

Photography - Photographic materials - Determination of ISO resolving power

BS ISO 18918:2000 成像材料.经处理的照相干版.存储常例

1 This International Standard specifies dark storage conditions, storage facilities, and handling and inspecting procedures for processed photographic plates having integral photographic layers and intended for record purposes. 2 This International Standard is applicable to black-and-white, silver-image, gelatin, processed photographic plates as defined in 3.7.7. It is also applicable to medium-term and extended-term storage conditions as defined in 3.6 and 3.2, respectively. No specific distinction is made, other than the degree of care, between photographic plates for medium-term or extended-term storage. Recommendations for plate storage relate to materials, methods, conditions, and forms of protection applicable specifically to plates defined in 1.1. However, these storage recommendations may also be applied to lacquered and opaque plates, to black-and-white plates altered by dyes or toners, colour plates and other historic photographic plates defined in 3.7.2 to 3.7.8. 3 It is not intended to predict or assign a useful lifetime to processed photographic plates stored in accordance with the specifications of this International Standard. 4 Recommendations for storage of photographic films are given in ISO 18911 and for storage of processed photographic reflection print material in ISO 18920. Although there is some variation in recommended storage conditions among these types of photographic materials, recommended temperature and relative humidity ranges do overlap. If all three types of photographic materials are found in one collection or within one storage area, the temperature and relative humidity should be chosen so that all materials are stored within their recommended ranges.

Imaging materials. Processed photographic plates. Storage practices

HG/T 3680-2000 彩色胶卷和相纸照片.冲洗加工技术规范

本标准规定了彩色冲洗扩印店冲洗彩色胶卷和扩印彩色照片的技术要求、 试验方法、检验规则。 本标准适用于使用C-41系列及兼容工艺类型的彩色负片自动冲洗机和EP-2、RA-4系列及兼容工艺类型的彩色相纸自动扩印机的彩色冲印店。

Specification for processing.Photographic colour films and paper prints

ISO 1007:2000 摄影 135胶卷及暗盒 规范

This International Standard specifies the following: — dimensions of film lengths; — latent-image frame numbering; — latent-image digital bar-codes to identify the film DX number; — dimensions of daylight-loading film magazines for use with 135-size cameras; — a magazine bar-code that identifies the film's DX number as well as the number of exposures; — camera auto-sensing areas, which provide an electrically readable encodement of film speed, number of exposures, and recommended exposure latitude for use with appropriately designed cameras; — an information panel on which the film identification, speed and number of exposures are visible through a window in the back of appropriately designed cameras; — film pull-out force specification; — film-spool attachment strength specification. This International Standard is not intended to apply to "bulk" 35-mm film used for reloading into 135-size magazines, nor to the reloadable magazines themselves. Also, this standard does not apply to 135-size film and magazines that are used in single-use camera applications.

Photography - 135-size film and magazine - Specifications

DIN ISO 1008:2000 摄影.相纸尺寸.图片纸

The document specifies the nominal sizes and preferred dimensions of papers in sheets with their cutting tolerances and includes a method for checking the squareness of the sheets and straightness of their edges.

Photography - Paper dimensions - Pictorial sheets (ISO 1008:1992)

ISO 18907:2000 成像材料 摄影胶片和相纸 以锤击试验韧性

This International Standard specifies a method for determining and expressing quantitatively the brittleness of photographic film and papers. It does not, however, specify a universal brittleness test for all types of stress encountered for which special tests can be required to correctly rate the material for brittleness. The method is applicable to films with or without a gelatin backing and to fibre-based or resin-coated (RC) photographic papers. It may also be applied to either raw or processed materials although the brittleness level can be quite different after processing from that before processing.

Imaging materials - Photographic films and papers - Wedge test for brittleness

ISO 18908:2000 成像材料 摄影胶片 耐折叠性的测定

This International Standard specifies a method for determining and quantitatively expressing the folding endurance of photographic film. The method is based on the MIT folding-endurance tester described in annex B. It is an analytical test and is not intended to simulate practical use conditions. This International Standard is applicable to film with or without a gelatin backing. It may also be applied to either raw or processed film, although the flexibility level of a given film can be quite different after processing. Equipment similar to that described in this International Standard may be used provided that a correlation has been established between the results obtained using such equipment and the results obtained using the equipment described.

Imaging materials - Photographic film - Determination of folding endurance

ISO 6328:2000 摄影 照相材料 ISO分辨率的测定

This International Standard specifies a method for determining the resolving power of photographic films, plates and papers, including black-and-white films, black-and-white printing papers, colour-reversal films, colour-negative films, and colour-printing papers. Materials designed for X-ray and other high-energy radiation are excluded, as are photographic materials used in medical radiography where the exposure source is an intensifying screen in contact with the film (sensitized on one or two sides). Also excluded are materials having photo-polymer, diazo, etc. light-sensitive layers.

Photography - Photographic materials - Determination of ISO resolving power

ISO 18910:2000 成像材料 摄影胶片和相纸 弯曲的测定

This International Standard specifies methods for determining and quantitatively expressing the curl characteristics of unprocessed and processed photographic film and paper in sheet, roll or strip formats. It specifies three measuring methods: method A involves the determination of curl when the specimen is held in a vertical position, methods B and C with the specimen in a horizontal position. The values for the three methods are not comparable because of the differences in specimen configuration and size. These methods are not intended for use in determining the curl characteristics of photographic materials during processing or drying.

Imaging materials - Photographic film and paper - Determination of curl

ISO 18904:2000 成像材料 冲洗过的胶片 测定润滑性方法

This International Standard specifies a method of determining the presence of a lubricant on photographic film. It is intended that the test should be applied to film after processing, but the test may be used in other situations. It is applicable to both the emulsion and support sides of the film. The results of the test are calculated in terms of a coefficient of friction, but the test does not purport to characterize the frictional characteristics of the film material.

Imaging materials - Processed films - Method for determining lubrication

BS ISO 18917:2000 摄影技术 在处理过的摄影材料上对残留硫代硫酸盐和其它相关化学制品的测定 碘-淀粉、亚甲蓝和硫化银方法

Photography. Determination of residual thiosulfate and other related chemicals in processed photographic materials. Methods using iodine-amylose, methylene blue and silver sulfide

BS ISO 18917:1999 摄影技术.在处理过的摄影材料上对残留硫代硫酸盐和其它相关化学制品的测定.碘-淀粉、亚甲蓝和硫化银方法

1 This International Standard specifies test methods for the determination of residual thiosulfate and other related chemicals in processed photographic materials. 2 This International Standard applies to silver halide/gelatin products that have been processed with a final thiosulfate fixing bath and a water wash. This International Standard does not apply to stabilised black-and-white products, thermally processed films, or instant-type products. The procedures given in this International Standard measure residual thiosulfate, and the silver densitometric method measures residual related polythionate materials as well. Measurements carried out by the procedures in this International Standard may, within the limitations stated in annexes A and B, correlate with the image stabilities of processed photographs. 3 Film or plates with photographic-sensitive layers on both sides, or with a photographic sensitive layer on one side and a gelatin backing layer on the reverse side, may contain approximately twice as much thiosulfate after processing as samples having a coating on one side only. This situation will be true for materials for which residual thiosulfate is determined by the iodine-amylose or methylene blue procedures. NOTE For the method of reporting such results, see figure 1, example 2. 4 The iodine-amylose can be used with fibre-based paper, resin-coated paper, films and plates. It is the method to be used with films and papers containing incorporated developing agents. 5 The methylene blue method can be used with fibre-based paper, resin-coated paper, films and plates but not with films and paper containing incorporated developing agents. 6 The silver sulfide densitometric method measures thiosulfates, polythionates and all other residual chemicals in a processed product that react with silver ion to form a silver "stain" under the conditions of the test. 7 A tabulated summary of methods, scope, etc. is given in annex B.

Photography - Determination of residual thiosulfate and other related chemicals in processed photographic materials - Methods using iodine-amylose, methylene blue and silver sulfide

DIN ISO 1012:2000 摄影.普通用的胶片和胶卷.尺寸

The document specifies the nominal sizes and aim dimensions with their cutting tolerances of photographic films in sheets and rolls for general photographic applications.

Photography - Film in sheets and rolls for general use - Dimensions (ISO 1012:1998)

ISO 18918:2000 成像材料 处理过的照相干版 储存规程

1 This International Standard specifies dark storage conditions, storage facilities, and handling and inspecting procedures for processed photographic plates having integral photographic layers and intended for record purposes. 2 This International Standard is applicable to black-and-white, silver-image, gelatin, processed photographic plates as defined in 3.7.7. It is also applicable to medium-term and extended-term storage conditions as defined in 3.6 and 3.2, respectively. No specific distinction is made, other than the degree of care, between photographic plates for medium-term or extended-term storage. Recommendations for plate storage relate to materials, methods, conditions, and forms of protection applicable specifically to plates defined in 1.1. However, these storage recommendations may also be applied to lacquered and opaque plates, to black-and-white plates altered by dyes or toners, colour plates and other historic photographic plates defined in 3.7.2 to 3.7.8. 3 It is not intended to predict or assign a useful lifetime to processed photographic plates stored in accordance with the specifications of this International Standard. 4 Recommendations for storage of photographic films are given in ISO 18911 and for storage of processed photographic reflection print material in ISO 18920. Although there is some variation in recommended storage conditions among these types of photographic materials, recommended temperature and relative humidity ranges do overlap. If all three types of photographic materials are found in one collection or within one storage area, the temperature and relative humidity should be chosen so that all materials are stored within their recommended ranges.

Imaging materials - Processed photographic plates - Storage practices

JB/T 8253-1999 135胶卷暗盒 技术要求

本标准规定了小型照相机用135胶卷暗盒的外形尺寸及胶卷与卷片芯的连接强度和卷片力等技术要求，并在附录A（标准的附录）中列出了测定方法。 本标准适用于135胶卷暗盒和类似的产品也可参照采用。

Specification for 135-size magazines

ECA SP3702-1999 高密度刀片接头( 556分之396针接触有问题的家庭)详细规范.评论截止日期 1997年9月20号 EIA-700A0AG

This specification provides the engineering and performance requirements for a family of high density blade contact printed wiring board (PWB) connectors of assessed quality designed for and test sequences.

Detail Specification for High Density Blade Connector (396/556 Pin Contact Families) Comment Period Expires: September 20, 1999; EIA-700A0AG

HG/T 3637-1999 126、110和135规格胶卷载像面的识别

本标准规定了126、1lO、135规格胶卷载像面识别的不同方法，这些规格的胶卷都带有片边标志。 本标准不适用于电影胶片。

Photography.Roll films,126,110 and 135 size films.Identification of the image-bearing side

HG/T 3638-1999 文件复制胶片尺寸

本标准规定了文件复制散页相纸和卷筒相纸的标称尺寸和目标尺寸及其偏差。 本标准还规定了散页相纸的形状要求、卷筒相纸的筒芯尺寸、卷绕和包装标志。 本标准适用于银-胶型和重氮盐型文件复制相纸和银络合扩散转移法用相纸。 本标准主要采用米制单位。

Photography.Film dimension.Film for documentary repreoduction

HG/T 3635-1999 120和220规格胶卷尺寸

本标准规定了120和220规格胶卷及两者通用的胶卷轴的尺寸。描述了胶片本身、120规格胶卷背纸、220规格胶卷牵引纸、拖尾纸和贴签的尺寸，以及他们的各自位置。还规定了胶片第一个画幅前和最后一个画幅后的保留区。 本标准主要使用米制单位。

Photography.Film dimensions.120 and 220 size